Modeling of Carbon Monoxide Hot Spots

This paper describes the results of a measurement and modeling study of carbon monoxide (CO) concentrations In the proximity of intersections. Analysis for model performance of paired observed and predicted CO concentrations are presented. Two methodologies of pollutant prediction were used: the Intersection Midblock Model (IMM) and a statistical multiple linear regression. The results showed that both methods underpredicted frequently and dispensed results that were site specific. In addition, correlations of IMM predicted concentrations to observed concentrations were poor (typically r² values <0.25). Various explanations for this observation are proposed. The statistical approach exhibited an improved accuracy over that of IMM. However, some of the independent variables used might be difficult to obtain as a routine measurement, and use of a one or two independent parameter model yielded adjusted R² values comparable to the r² values observed with IMM. Based on these results, an Intersection model applicable under a wide range of conditions of traffic, meteorology, and geometry is not available. Research Is needed to develop one, since its use would often be called on in the development of air quality sections of Environmental Assessments or Environmental Impact Statements.     

1985 Update,Operating History and Current Status of Fabric Filters in the Utility Industry

Stringent particulate emissions limits and increasing awareness of stack opacity is leading the utility industry to use high efficiency particulate control systems. In response to this trend, the Electric Power Research Institute (EPRI) is conducting several research programs aimed at improving the operation, maintenance and performance of particulate control systems. One of these programs, RP-1401, “Reliability Assessment of Particulate Control Systems,” is developing operation, maintenance and design data bases for both electrostatic precipitators and fabric filters. This paper discusses some of the intermediate findings of the work done on fabric filters.     

Interactions of Environmental Factors on the Sensitivity of Plants to Air Pollution

Before potential damage to vegetation can be adequately forecast, even after an air pollution alert has been placed in effect, a clear understanding of the interactions of environment on plant sensitivity must be ascertained. This involves detailed study of single factors and then multiple factors using the phytotoxicants in question. Factors studied or suggested include light (quality, intensity, and duration), temperature, carbon dioxide concentration, humidity, wind, soil moisture, soil aeration, nutrient levels, and soil texture. This paper presents a review of the work relating plant injury to specific air pollutants as conditioned by several environmental conditions supported by research on the interactions of ozone with these environmental conditions.     

The Effects Of Ozone On Tobacco And Pinto Bean as Conditioned by Several Ecological Factors

The sensitivity of tobacco and/or pinto bean to ozone, as an air pollutant, is increased by growing plants in a shortened photoperiod under reduced light intensity and in a light potting mix. Sensitivity also is influenced by carbon dioxide concentration, time of day, and age of plant at time of exposure. Plants are more severely injured by a given dose under continuous exposure than when the exposure is split into two time periods. Tobacco shows cumulative development of injury when exposed to low concentrations intermittently over several days.     

Environmental Appraisal-Particulate Matter,Oxides of Sulfur,and Sulfuric Acid

The role of particulate matter and oxides of sulfur in degradation of the atmospheric environment is discussed. The Federal Air Quality Criteria for these pollutants are analyzed for their conformance with the requirement of the Clean Air Act of 1967 that they reflect the latest scientific knowledge pertinent to the indication of their effects on health and welfare. Visibility reduction by suspended particulate matter is treated and the bases for the criteria issued in the documents “Air Quality Criteria for Particulate Matter” and “Air Quality Criteria for Sulfur Oxides” are examined. The reactions between particulate matter and gaseous pollutants are discussed, along with the Impact of particulate matter on modifications of weather processes. Local effects, such as precipitation, are considered. The relationship between pollution by particulate matter and cloud formation is discussed, as are persistence of fog and the observation that certain sources of particulate pollution are also sources of ice nuclei.     

enforcement of diesel smoke emissions for the state of new jersey

This paper reports on the research program undertaken by the State of New Jersey to determine those tests and instruments which can be used by authorized state agencies for the enforcement of diesel smoke emissions. The state agencies under consideration for the enforcement of diesel smoke emissions are the following: (1) The Division of Motor Vehicles, in its system of state owned inspection stations, will be able to inspect all diesel-powered trucks, and tractors which are registered in New Jersey. (2) The Public Utilities Commission will be able to inspect at their home garages all buses registered in the State. (3) The New Jersey State Police will be able to inspect diesel-powered vehicles on the road. It was decided that the maximum inspection time for each vehicle was not to exceed one minute. On the basis of the one minute per vehicle requirement, eight different tests were evaluated to determine which ones correlated well with normal vehicle operation. These tests included acceleration of a fixed external inertia, free acceleration of only the moving parts of the engine, three ramp tests, a test in which a heavy vehicle was towed, and a driving test in which the vehicle being tested was actually accelerated. The results of tests demonstrated that the modified free acceleration method correlates reasonably well with a loaded steady state cycle, distinguishes the high emitters and is simple to perform. Consequently, the free acceleration test method is recommended for use in inspection stations and on the road. Finally, nearly two hundred vehicles have been tested by this procedure to determine present and potential levels of diesel smoke emissions. Another phase of the program consisted of the determination of smoke measuring techniques and instrumentation. The use and design of smokemeters were extensively investigated, as well as the use of the visual and photographic techniques. Of the various smokemeters tested for this application, several measured smoke satisfactorily in the laboratory, but none were found adequate for field use; they either lacked portability or were unstable due to the deposition of soot on the optics. At the time of writing, specifications for the necessary smokemeter have been drafted and published for bid to interested manufacturers.     

National Emission Standards Introduction

A feature of the 63rd annual meeting of the Air Pollution Control Association, held June 14–18, 1970 in St. Louis, was a plenary session on national emission standards. Presided over by John S. Lagarias, APCA past president, the session explored the theme for both motor vehicles and stationary sources through the presentations of Delbert S. Barth and Arthur C. Stern and the discussions of John A. Maga and Robert L. Harris, Jr. The essence of their remarks appears on the following pages.     

The Formulation of Emission Control Strategies Using a Cubic Polynomial Approximation

Assuming the existence of an ambient air standard for a given pollutant, there is some agreement that emission standards for local area and point sources should be established by formulating and testing various “control strategies” with use of a computer diffusion model. The procedure requires several, perhaps many, computer simulations of pollutant dispersion followed by an analysis of the results of each simulation. Part of this analysis is to include an “optimization” of sorts which is intended to provide a workable control strategy which, in turn, is to indicate required emission level reductions for point sources. This paper is intended to describe and apply an approximation technique which, when used in conjunction with a diffusion model, could be of value in determining acceptable emission levels for point sources.