Ecologically Functional Floodplains: Connectivity,Flow Regime,and Scale1

Opperman, Jeffrey J., Ryan Luster, Bruce A. McKenney, Michael Roberts, and Amanda Wrona Meadows, 2010. Ecologically Functional Floodplains: Connectivity, Flow Regime, and Scale. Journal of the American Water Resources Association (JAWRA) 46(2):211-226. DOI: 10.1111/j.1752-1688.2010.00426.x Abstract: This paper proposes a conceptual model that captures key attributes of ecologically functional floodplains, encompassing three basic elements: (1) hydrologic connectivity between the river and the floodplain, (2) a variable hydrograph that reflects seasonal precipitation patterns and retains a range of both high and low flow events, and (3) sufficient spatial scale to encompass dynamic processes and for floodplain benefits to accrue to a meaningful level. Although floodplains support high levels of biodiversity and some of the most productive ecosystems on Earth, they are also among the most converted and threatened ecosystems and therefore have recently become the focus of conservation and restoration programs across the United States and globally. These efforts seek to conserve or restore complex, highly variable ecosystems and often must simultaneously address both land and water management. Thus, such efforts must overcome considerable scientific, technical, and socioeconomic challenges. In addition to proposing a scientific conceptual model, this paper also includes three case studies that illustrate methods for addressing these technical and socioeconomic challenges within projects that seek to promote ecologically functional floodplains through river-floodplain reconnection and/or restoration of key components of hydrological variability.     

Verification of diffusive and pumped samplers for volatile organic compounds using a controlled atmosphere test facility

There is a requirement to verify the performance of sorbent-based passive or active samplers and to extend their use, where possible, to monitor volatile organic compounds (VOCs) that are known to be photochemical ozone pre-cursors or are relevant to the activities of the petrochemical industry. We report measurements of the 14-day diffusive uptake rates for the VOCs: i-butane (2-methyl propane), n-butane, i-pentane (2-methyl butane), n-pentane, n-hexane, benzene, toluene, and m-xylene (at environmental level concentrations) for industry standard axial samplers (Perkin–Elmer-type samplers) containing the sorbents Carbopack-X, -Z, -B or Tenax-TA. We also present data on back-diffusion, blank levels, and storage for the above sorbents, and describe the simultaneous use of the sorbent Carbopack-X for pumped sampling of certain VOCs. The results were obtained by dosing samplers in a controlled atmosphere test facility (CATFAC) operating under well-defined conditions of concentration, nominal temperature of 20 °C, wind speed of 0.5 m s^?1, and relative humidities of 0% and 80%. Field measurements were also obtained to provide supplementary data to support the laboratory study. Results are compared to existing published data, where these are available.     

Long-term monitoring of a marine geologic hydrocarbon source by a coastal air pollution station in Southern California

Hourly total hydrocarbon (THC) data, spanning 1990–2008 from a California air pollution station located near the Coal Oil Point (COP) seep field, were analyzed and clearly showed geologic CH₄ emissions as the dominant local source. Annual COP emissions are conservatively estimated as 0.015 Tg CH₄ year^?1 and represent a natural and concentrated geologic methane source (24 m³ m^?2 day^?1 gas flux at some active seeps, Clark et al., 2010). For a sense of the scale and potential importance to the regional Southern California methane budget, COP emits an amount equivalent to 8% of the estimated Los Angeles County anthropogenic emissions. Station THC measurements near COP showed a strong wind dependency with elevated levels closely correlated with a sonar-derived spatial distribution of seep field emissions. THC varied seasonally, with a maximum in January and minimum in July and a peak-to-peak amplitude of 0.24 ppm. The seasonal signal was more readily apparent midday (R² = 0.69 harmonic fit), compared to nighttime and morning (R² < 0.45). The bimodal diel THC pattern consisted of seasonally-modulated peaks in the morning and evening.THC temporal and spatial trends were consistent with both transport and source emission variations. Long-term, annual seep field emissions consistently decreased on a field-wide basis until the late 1990s, before increasing consistently, most likely as a function of underlying geologic processes. This study demonstrates the value of municipal air quality monitoring stations for insight into local greenhouse gas sources and highlights the non-negligible and variable contribution from marine geologic seepage.     

Chemical mass balance source apportionment for combined PM2.5 measurements from U.S. non-urban and urban long-term networks

The Minnesota Particulate Matter 2.5 (PM_2.5) Source Apportionment Study was undertaken to explore the utility of PM_2.5 mass, element, ion, and carbon measurements from long-term speciation networks for pollution source attribution. Ambient monitoring data at eight sites across the state were retrieved from the archives of the Interagency Monitoring of Protected Visual Environments (IMPROVE) and the Speciation Trends Network (STN; part of the Chemical Speciation Network [CSN]) and analyzed by an Effective Variance – Chemical Mass Balance (EV-CMB) receptor model with region-specific geological source profiles developed in this study. PM_2.5 was apportioned into contributions of fugitive soil dust, calcium-rich dust, taconite (low grade iron ore) dust, road salt, motor vehicle exhaust, biomass burning, coal-fired utility, and secondary aerosol. Secondary sulfate and nitrate contributed strongly (49–71% of PM_2.5) across all sites and was dominant (≥60%) at IMPROVE sites. Vehicle exhausts accounted for 20–70% of the primary PM_2.5 contribution, largely exceeding the proportion in the primary PM_2.5 emission inventory. The diesel exhaust contribution was separable from the gasoline engine exhaust contribution at the STN sites. Higher detection limits for several marker elements in the STN resulted in non-detectable coal-fired boiler contributions which were detected in the IMPROVE data. Despite the different measured variables, analytical methods, and detection limits, EV-CMB results from a nearby IMPROVE-STN non-urban/urban sites showed similar contributions from regional sources – including fugitive dust and secondary aerosol. Seasonal variations of source contributions were examined and extreme PM_2.5 episodes were explained by both local and regional pollution events.     

A method for the determination of rhodamine b and brilliant sulfaflavine on cotton string collectors and in a spray tank solution mixture

Abstract

A fluorescent method for the determination of rhodamine B (RhB) and brilliant sulfaflavine (BSF) dual tracers on cotton string collectors and in spray tank solutions was developed for the evaluation of the effects of adjuvants on the atmospheric drift of agricultural sprays. Both tracers on collectors were extracted with deionized water simultaneously and measured directly with a Fluorescent Specrometer by switching the maximum excitation and emission wavelengths. The linear ranges of the RhB and BSF standard curves were 0–50 and 0–10 ppb respectively. Recoveries of tracers on cotton strings ranged from 92.9% ± 1.1% to 95.1% ± 1.0% for RhB and 91.9% ± 2.8% to 103% ± 0.6% for BSF when spiked levels ranged from 0.25 to 2.5 μg per collector. The detection limit of the instrument was approximately 0.1 ppb for both tracers. The detection limits of the analytical method were approximately 0.1 ppb for RhB and 0.3 ppb for BSF when the background levels of cotton strings were subtracted. The presence of one tracer in the solution did not significantly interfere with the detection of the other tracer in the same solution. The presence of adjuvants added to the spray tank solutions did not interfere with the detection of both tracers when the adjuvants were applied at the manufacturer's maximum recommendation rates.     

Quantitative and qualitative characteristics of dissolved organic matter from eight dominant aquatic macrophytes in Lake Dianchi, China

The aim of this research was to determine and compare the quantitative and qualitative characteristics of dissolved organic matters (DOM) from eight aquatic macrophytes in a eutrophic lake. C, H, N, and P in ground dry leaves and C, N, and P in DOM of the species were determined, and C/N, C/P, C/H, DOC/C, TDN/N, TDP/P, DOC/TDN, and DOC/TDP were calculated. Chemical structures of the DOM were characterized by the use of multiple techniques including UV-visible, FT-IR, and ¹³C CP/MAS spectra. The results showed subtle differences in quantity and quality of DOM among species and life-forms. Except oriental pepper which had a C/H of 0.7, C/H of all the other species was 0.6. C/N and C/P of ground leaves was 10.5–17.3 and 79.4–225.3, respectively, which were greater in floating and submerged species than in the others. Parrot feather also had a small C/P (102.8). DOC/C, TDN/N, and TDP/P were 7.6–16.8, 5.5–22.6, and 22.9–45.6 %, respectively. Except C/N in emergent and riparian species, C/N in the other species and C/P in all the species were lower in their DOM than in the ground leaves. DOM of the macrophytes had a SUVA₂₅₄ value of 0.83–1.80. The FT-IR and ¹³C NMR spectra indicated that the DOM mainly contained polysaccharides and/or amino acids/proteins. Percent of carbohydrates in the DOM was 37.3–66.5 % and was highest in parrot feather (66.5 %) and crofton weed (61.5 %). DOM of water hyacinth, water lettuce, and sago pondweed may have the greatest content of proteins. Aromaticity of the DOM was from 6.9 % in water lettuce to 17.8 % in oriental pepper. DOM of the macrophytes was also different in polarity and percent of Ar–OH. Distinguished characteristics in quantity and quality of the macrophyte-derived DOM may induce unique environmental consequences in the lake systems.     

Sedimentary record of polycyclic aromatic hydrocarbons and DDTs in Dianchi Lake, an urban lake in Southwest China

Unique time trends of polycyclic aromatic hydrocarbons (PAHs) and dichlorodiphenyltrichloroethanes (DDTs) were found in a dated sediment core from Dianchi Lake (DC), an urban lake in Southwest China. The temporal trend of PAHs in DC was not only different from those in China's coastline and remote lakes of China, but also different from those in more developed countries. Identification of sources suggested that PAHs in DC originated primarily from domestic combustion of coal and biomass. However, a change of source from low- and moderate-temperature combustion to high-temperature combustion processes was observed. Different from those in China's coastline and some developed countries, the temporal trend of DDTs in DC mirrored the historical usage of DDTs in China, with erosion of soils and surface runoff from its drainage area the most likely routes of DDT introduction to the lake. Rapid urbanization and industrialization in its catchment, effective interception of point-source pollution, and changes in sources of energy during the last few decades have significantly influenced the vertical profiles of PAHs in DC.     

Enzymatic synthesis of bromo- and chlorocarbazoles and elucidation of their structures by molecular modeling

3-Chlorocarbazole, 3,6-dichlorocarbazole, dibromocarbazole, and 1,3,6,8-tetrabromocarbazole are emerging environmental contaminants which have been detected recently in water, sediment, and soil samples. However, their sources and occurrence have not been explained. Here, we report an enzymatic synthesis of bromo- and chlorocarbazoles by chloroperoxidase from Caldariomyces fumago in water. Density functional theory (DFT) method was used to predict the most stable products. Carbazole and chloroperoxidase were assayed in vitro in the presence of hydrogen peroxide, bromide, and chloride ions in different substrate ratio treatments against constant and varying enzyme concentrations. Halogenated carbazoles formed were identified by high-resolution gas chromatography coupled to mass spectrometry. In all treatments, bromination and chlorination took place, but the composition and concentration of compounds formed varied from one treatment to another. Mono-, di-, tri-, and tetra-substituted bromo- and chlorocarbazoles which include the reported environmental contaminants were synthesized. 3-Substituted and 3,6-substituted congeners were relatively higher in concentration. Enzyme concentration did not favor preferential formation of any of the compounds synthesized. However, their synthesis was influenced by halide concentration. Congeners with bromine and chlorine at position of C-3, C-3,6, C-1,3,6, and C-1,3,6,8 were calculated as the stable intermediate sigma complexes by DFT method. Regioselectivity in halogenation is discussed and hypothesis of the likely stable products in the environment explained. This study provides evidence that bromo- and chlorocarbazoles reported previously can be formed enzymatically in the environment, demonstrating the need to consider aromatic pollutants transformation and their potential toxicity enhancements in the management of water pollution and contaminated sites.     

Control of Asphaltic Concrete Plants in Los Angeles County

Characteristics of maximum short-term ground level concentrations from an elevated point source, namely, the effective plume height, the critical wind speed, the distance to the point of maximum concentration, and the maximum concentration, are derived from the gaussian plume model. Both phases of plume development—before and after it has reached its final height—are considered. The plume rise treatment includes both thermal buoyancy and momentum effects. Certain limitations on critical wind speed are discussed. The dispersion model whose basis is established in this paper should be especially useful in applications where on site meteorological data are unavailable.     

Problems in Judging Plume Opacity—A Simple Device for Measuring Opacity of Wet Plumes

The discoloration of exterior paint, has been shown to occur when H₂S in the air reacts with heavy metal salts used as pigments or fungicides in the paint. Simple field tests can give an indication whether H₂S was involved. An electron diffraction technique is described to identify the discolored compound in paint samples. Field experience in Jacksonville using this method is described.