Nonlinearities in source receptor relationships for sulfur and nitrogen compounds

The relationship between emissions and deposition of air pollutants, both spatially and in time forms an important focus for science and for policy makers. In practice, this relationship may become nonlinear if the underlying processes change with time, or in space. Nonlinearities may also appear due to errors in emission or deposition data, and careful scrutiny of both data sources and their relationship provides a means of picking up such deficiencies. Nonlinearities in source receptor relationships for sulfur and nitrogen compounds in Europe have been identified in measurement data for the UK. In the case of sulfur, the dry deposition process has been shown to be strongly influenced by ambient concentrations of NH3, leading to substantial increases in deposition rate as SO2 concentrations decline and the ratio SO2/NH3 decreases. The field evidence extends to measurements over three different surfaces in three countries across Europe. A mechanistic understanding of the cause of this nonlinearity has been provided. Apparent nonlinearities also exist in the sulfur deposition field through the influence of shipping emissions. The effect is clear at west coast locations, where during a period in which land-based sulfur emissions declined by 50%, no significant decline in concentrations of SO(2-) in precipitation were observed. The sites affected are primarily the coastal regions of southwestern UK, where shipping sources contribute a substantial fraction of the deposited sulfur, but the effect is not detectable elsewhere. Full quantification of the spatially disaggregated emission and their changes in time will eliminate this apparent nonlinearity in the source-receptor data. For oxidized nitrogen emission and deposition in the UK, there is strong evidence of nonlinearity in the source-receptor relationship. The concentrations and deposition of NO(3-) in precipitation have declined little following a reduction in emissions of 45% during the period 1987 to 2001. The data imply a significant decrease in the average transport distance for oxidized nitrogen and most probably an increase in the average oxidation rate. However, the net effect of changes in aerosol chemistry due to changes in sulfur emissions and less competition for the main oxidants as a consequence of reductions in sulfur emission have not been separated. A quantitative explanation of the cause of this nonlinearity is lacking and the effects are therefore identified as an important uncertainty for the development of further protocols to control acidification, eutrophication and photochemical oxidants in Europe.     

Experimental determination of sorption in fractured flow systems

Fracture "skins" are alteration zones on fracture surfaces created by a variety of biological, chemical, and physical processes. Skins increase surface area, where sorption occurs, compared to the unaltered rock matrix. This study examines the sorption of organic solutes on altered fracture surfaces in an experimental fracture-flow apparatus. Fracture skins containing abundant metal oxides, clays, and organic material from the Breathitt Formation (Kentucky, USA) were collected in a manner such that skin surface integrity was maintained. The samples were reassembled in the lab in a flow-through apparatus that simulated approximately 2.7 m of a linear fracture "conduit." A dual-tracer injection scheme was utilized with the sorbing or reactive tracer compared to a non-reactive tracer (chloride) injected simultaneously. Sorption was assessed from the ratio of the first temporal moments of the breakthrough curves and from the loss of reactive tracer mass and evaluated as a function of flow velocity and solute type. The breakthrough curves suggest dual-flow regimes in the fracture with both sorbing and non-sorbing flow fields. Significant sorption occurs for the reactive components, and sorption increased with decreasing flow rate and decreasing compound solubility. Based on moment analysis, however, there was little retardation of the center of solute mass. These data suggest that non-equilibrium sorption processes dominate and that slow desorption and boundary layer diffusion cause extensive tailing in the breakthrough curves.     

Radiocarbon content of synthetic and natural semi-volatile halogenated organic compounds

Some halogenated organic compounds, such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polybrominated diphenyl ethers (PBDEs), have been suggested to have natural sources but separating these compounds from their commercially synthesized counterparts is difficult. Molecular-level 14C analysis may be beneficial since most synthetic compounds are manufactured from petrochemicals (14C-free) and natural compounds should have "modern" or "contemporary" 14C levels. As a baseline study, we measured, for the first time, the 14C abundance in commercial PCB and PBDE mixtures, a number of organochlorine pesticides, as well as one natural product 2-(3',5'-dibromo-2'-methoxyphenoxy)-3,5-dibromoanisole. The latter compound was isolated from a marine sponge and is similar in structure to a PBDE. All of the synthetic compounds were 14C-free except for the pesticide toxaphene. which had a modern 14C abundance, as did the brominated natural compound. The result for toxaphene was not surprising since it was commercially synthesized by the chlorination of camphene derived from pine trees. These results suggest that measuring the 14C content of halogenated organic compounds may be quite useful in establishing whether organic compounds encountered in the environment have natural or synthetic origins (or both) provided that any synthetic counterparts derive from petrochemical feedstock.     

Chapter three: methodology of exposure modeling

In this chapter, the concept of exposure assessment and its evolution is introduced, and evaluated by critically appraising the pertinent literature as it applies to exposures to Particulate Matter (PM). Exposure measurement or estimation methodologies and models are reviewed. Three exposure/measurement methodologies are assessed. Estimation methods focus on source evaluation and attribution, sources include those outdoors and indoors as well as in occupational and in-transit environments. Fate and transport models and their inputs are addressed to estimate concentrations outdoors and indoors; source attribution techniques help focus on the contributing sources. Activity pattern techniques are also reviewed and their use in exposure models to estimate inhalation exposure to PM is presented. Deterministic, regression and other stochastic models of exposure to PM are reviewed and evaluated. Strengths, limitations, assumptions and affirmations of the use of exposure assessment as an integral component of risk assessment and risk management are discussed in the conclusions and discussions section of this work.     

Ozone predictions in Atlanta, Georgia: analysis of the 1999 ozone season

Ozone prediction has become an important activity in many U.S. ozone nonattainment areas. In this study, we describe the ozone prediction program in the Atlanta metropolitan area and analyze the performance of this program during the 1999 ozone-forecasting season. From May to September, a team of 10 air quality regulators, meteorologists, and atmospheric scientists made a daily prediction of the next-day maximum 8-hr average ozone concentration. The daily forecast was made aided by two linear regression models, a 3-dimensional air quality model, and the no-skill ozone persistence model. The team's performance is compared with the numerical models using several numerical indicators. Our analysis indicated that (1) the team correctly predicted next-day peak ozone concentrations 84% of the time, (2) the two linear regression models had a better performance than a 3-dimensional air quality model, (3) persistence was a strong predictor of ozone concentrations with a performance of 78%, and (4) about half of the team's wrong predictions could be prevented with improved meteorological predictions.     

Association of benzo(a)pyrene with dissolved organic matter: Prediction of Kdom from structural and chemical properties of the organic matter

The affinity of dissolved organic matter (DOM) for binding a polycyclic aromatic hydrocarbon, benzo(a)pyrene (BaP), was measured for 11 surface and ground waters and a commercial humic acid. The hydrophobic-acid (HbA) and hydrophobic-neutral (HbN) compositions of the DOM, solution absorptivity at 270nm (ABS₂₇₀), and DOM molar volumes were determined. Waters enriched in HbA material had a larger molar volume and higher aromatic content (as indicated by the ABS₂₇₀). There was a good correlation between the size and HbA content of the DOM from the different sources and the K_dom for binding BaP. An excellent predictive relationship (r² = 0.9) was demonstrated between the ABS₂₇₀ of a water and the K_dom for binding BaP. Based on these results, it is suggested that binding of BaP to DOM depends not only on the hydrophobicity of DOM, but also on the existence of an open structure within the DOM to provide access of the aqueous solute to hydrophobic domains within the DOM.     

Kinetics of mass and DNA decomposition in tomato leaves

This laboratory study investigated the kinetics of leaf and DNA content decomposition in two varieties of tomato (Palmiro and Admiro) after incubation in soil for 35 days. Results revealed that the decrease of dry matter in leaves in both varieties did not follow a single exponential function and was better described by a double exponential model. Composite half-decrease times were 3.4 and 2.4 days for Palmiro and Admiro respectively. The same pattern was observed for DNA mass loss, although this was closer to a single exponential model with composite half-decrease times of 1.5 and 1.4 days. Genomic analysis showed that DNA in dried leaves at room temperature (not inoculated in the soil), remains intact or presents a weak degradation, and DNA extracted from leaves inoculated in non-sterile soil showed degradation after two days. These results indicate that before release an important quantity of DNA may be degraded inside plant tissues during decomposition in soil.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 1. Stabilization performance of a continuous-flow reactor at low residence time.

There is increasing interest in the United States in producing biosolids from municipal wastewater treatment that meet the criteria for Class A designation established by the U.S. Environmental Protection Agency. Class A biosolids are intended to be free of pathogens and also must meet requirements for reduction of the vector-attraction potential associated with untreated sludge. High-temperature processes are considered to produce Class A biosolids if the combination of operating temperature and treatment time exceeds minimum criteria, but this option is not applicable to mixed, continuous-flow reactors. Such reactors, or any combination of reactors that does not meet the holding time requirement at a specific temperature, must be demonstrated to inactivate pathogens to levels consistent with the Class A criteria. This study was designed to evaluate pathogen inactivation by thermophilic anaerobic digestion in a mixed, continuous-flow reactor followed by batch or plug-flow treatment. In this first of a two-part series, we describe the performance of a continuous-flow laboratory reactor with respect to physical and chemical operating parameters; microbial inactivation in the combined continuous-flow and batch treatment system is described in the second part. Sludges from three different sources were treated at 53 degrees C, while sludge from one of the sources was also treated at 55 and 51 degrees C. Relatively short hydraulic retention times (four to six days) were used to represent a conservative operating condition with respect to pathogen inactivation. Treatment of a fermented primary sludge led to an average volatile-solids (VS) destruction efficiency of 45%, while VS destruction for the other two sources was near or below 38%, the Class A criterion for vector attraction reduction. Consistent with other studies on thermophilic anaerobic digestion of sludges at short residence times, effluent concentrations of volatile fatty acids (VFAs) were relatively high. Also consistent with other studies, the most abundant VFA in the effluent was propionate. Gas production ranged from 0.3 to 0.5 m3/kg VS fed and from 0.8 to 1.3 m3/kg VS destroyed.     

Sulphur dioxide adsorption in Scots pine canopies exposed to high ammonia emissions near a Cu-Ni smelter in SW Finland

Since 1994 the nickel-processing plant at the Cu-Ni smelter at Harjavalta, south-west Finland, has emitted considerable amounts of NH(3) into the atmosphere. The effects of NH(3) emissions on nitrogen and sulphur deposition in throughfall and the foliar nutrient status were investigated in a Scots pine stand at 0.5 km distance. Bulk deposition, stand throughfall and percolation water (20 cm depth) samples were collected at 4-week intervals during 1992-1998. pH and the Ca, Mg, K, NH(4) and SO(4) concentrations were determined on the samples. NH(3) emissions have strongly increased the scavenging of SO(2) from the air in the pine stand, and the increased levels of N and S deposition were clearly evident as increased foliar N and S concentrations and larger needle size. The increased input of SO(4) into the forest floor was not associated with an increase in the leaching of Ca and Mg from the surface soil layers.     

Droplet charging for wet scrubbers

Water droplet charge/mass of wet scrubbers was measured over the direct charging applied potential range of 0-20 kV, 30-70 pounds per square inch gauge (206.8-482.6 kPa) water pressure, and with spiral, impingement, and whirl nozzles. The measured charge/mass ranged from -0.0005 to 0.2 microcoulomb/gm and was directly related to the applied voltage. The water charge/mass was a function of the spray nozzle, with the smaller orifice lower-flow nozzles having the higher charge/mass.