Particulate Emissions from Construction Activities

Abstract

Although it has long been recognized that road and building construction activity constitutes an important source of particulate matter (PM) emissions throughout the United States, until recently only limited research has been directed to its characterization. This paper presents the results of PM₁₀ and PM_2.5 (particles ≤10 μm and ≤2.5 μm in aerodynamic diameter, respectively) emission factor development from the onsite testing of component operations at actual construction sites during the period 1998 –2001. Much of the testing effort was directed at earthmoving operations with scrapers, because earthmoving is the most important contributor of PM emissions across the construction industry. Other sources tested were truck loading and dumping of crushed rock and mud and dirt carryout from construction site access points onto adjacent public paved roads. Also tested were the effects of watering for control of scraper travel routes and the use of paved and graveled aprons at construction site access points for reducing mud and dirt carryout. The PM₁₀ emissions from earthmoving were found to be up to an order of magnitude greater than predicted by AP-42 emission factors drawn from other industries. As expected, the observed PM_2.5:PM₁₀ emission factor ratios reflected the relative importance of the vehicle exhaust and the resuspended dust components of each type of construction activity. An unexpected finding was that PM_2.5 emissions from mud and dirt carryout were much less than anticipated. Finally, the control efficiency of watering of scraper travel routes was found to closely follow a bilinear moisture model.     

Fingerprinting of High Boiling Hydrocarbon Fuels,Asphalts and Lubricants

Fingerprinting of hydrocarbon products requires high resolution differentiation of individual hydrocarbon compounds in any mixture. This requires the applications of various measuring techniques. In this paper, we have chosen the heavy hydrocarbons in fuels, lubricants and paving material as examples to discuss the methods for chemical characterization and differentiation. In the category most frequently termed "semi-volatile hydrocarbons" with boiling points from about 500°F to 1200°F or higher, there are several families of hydrocarbons, both natural and refined that are not easily distinguished by conventional EPA tests. Among the groups which we will use as examples are asphalts, hydraulic fluid, transmission oil, motor lubricating oils, heating oils, crude oil and coal. These hydrocarbon families are best studied using combined gas chromatography-mass spectrometry in full scan mode and characterizing various homologous series of hydrocarbons at known fragment ions. The hydrocarbon series providing the best information are: (1) N -alkanes; (2) iso-alkanes; (3) steranes; (4) terpanes; (5) polynuclear aromatic hydrocarbons; (6) aromatic steranes; and (7) specific polycyclic compounds.     

Simulating Land-Cover Change in Montane Mainland Southeast Asia

We used the conversion of land use and its effects (CLUE-s) model to simulate scenarios of land-cover change in Montane mainland southeast Asia (MMSEA), a region in the midst of transformation due to rapid intensification of agriculture and expansion of regional trade markets. Simulated changes affected approximately 10 % of the MMSEA landscape between 2001 and 2025 and 16 % between 2001 and 2050. Roughly 9 % of the current vegetation, which consists of native species of trees, shrubs, and grasses, is projected to be replaced by tree plantations, tea, and other evergreen shrubs during the 50 years period. Importantly, 4 % of this transition is expected to be due to the expansion of rubber (Hevea brasiliensis), a tree plantation crop that may have important implications for local-to-regional scale hydrology because of its potentially high water consumption in the dry season.     

Reforestation Strategies Amid Social Instability: Lessons from Afghanistan

Foreign and domestic government agencies and other international organizations pursue reforestation programs in rural upper watershed areas of Afghanistan over the past decade to alleviate poverty, combat the insurgency and rehabilitate a depleted forest resource base. Popular programs incorporate cash-for-work to conduct hillside terracing, check dam construction and tree-planting for nut production, fuel wood, timber, dune stabilization, and erosion abatement. Programmatic approaches have varied as a function of accessibility, security and local objectives. Uncertain land tenure and use rights, weak local environmental management capacity, and a focus on agricultural production to meet immediate needs limit interest, nationally and locally. Unreliable security, a lack of high quality tree planting stock, limited technical knowledge and coordination among government agencies, and poor security hamper program expansion. Reforestation success would be most likely where these issues are least acute. The Afghan government should focus on supporting community based natural resource management, developing and disseminating improved conservation tree nursery strategies, and promoting watershed management schemes that incorporate forestry, range management and agronomic production. Reforestation practitioners could benefit from the human and material resources now present as part of the international war effort. Successes and failures encountered in Afghanistan should be considered in order to address similar problems in insecure regions elsewhere when reforestation may help reverse environmental degradation and contribute to broader social stabilization efforts.     

Monitoring of Vegetation Impact Due to Trampling on Cadillac Mountain Summit Using High Spatial Resolution Remote Sensing Data Sets

Cadillac Mountain—the highest peak along the eastern seaboard of the United States—is a major tourist destination in Acadia National Park, Maine. Managing vegetation impact due to trampling on the Cadillac Mountain summit is extremely challenging because of the large number of visitors and the general open nature of landscape in this fragile subalpine environmental setting. Since 2000, more intensive management strategies—based on placing physical barriers and educational messages for visitors—have been employed to protect threatened vegetation, decrease vegetation impact, and enhance vegetation recovery in the vicinity of the summit loop trail. The primary purpose of this study was to evaluate the effect of the management strategies employed. For this purpose, vegetation cover changes between 2001 and 2007 were detected using multispectral high spatial resolution remote sensing data sets. A normalized difference vegetation index was employed to identify the rates of increase and decrease in the vegetation areas. Three buffering distances (30, 60, and 90?m) from the edges of the trail were used to define multiple spatial extents of the site, and the same spatial extents were employed at a nearby control site that had no visitors. No significant differences were detected between the mean rates of vegetation increase and decrease at the experimental site compared with a nearby control site in the case of a small spatial scale (≤30?m) comparison (in all cases P?>?0.05). However, in the medium (≤60?m) and large (≤90?m) spatial scales, the rates of increased vegetation were significantly greater and rates of decreased vegetation significantly lower at the experimental site compared with the control site (in all cases P?<?0.001). Research implications are explored that relate to the spatial extent of the radial patterns of impact of trampling on vegetation at the site level. Management implications are explored in terms of the spatial strategies used to decrease the impact of trampling on vegetation.     

Development of Thixotropic Coatings Using Dimerized Soybean Oil Fatty Acids: The Case of Polyamide of 1,2-Phenylene Diamine

Soybean oil (SBO) was dimerized and the crude dimer acid product reacted with 1,2-phenylene diamine at 210 ± 5 °C under inert atmosphere to obtain fatty polyamide (FPA). The FPA was used to modify a commercial alkyd resin by reacting a mixture of the alkyd resin with 5 wt% of FPA at 120 °C for 80 min under inert atmosphere. The FTIR spectrum of the FPA modified resin showed evidence of higher degree of H-bonding than was found for the unmodified alkyd. White gloss coatings of 15, 20, 25, and 30% solids were formulated from the modified and unmodified resins and examined for performance with respect to: leveling, sag resistance, drying time, pigment settling, skinning tendency and film hardness. Results showed that the unmodified alkyd coatings exhibited good leveling but poor sag resistance at all solid contents. In contrast, FPA modified alkyd coatings combined good leveling with high sag resistance indicating their thixotropic nature. A strong tendency to pigment settling was observed for unmodified alkyd coatings but was not observed in the FPA modified alkyd coatings. The modified alkyd coatings showed skinning while the unmodified alkyd coatings did not skin. A 30% solids coating formulation of the FPA modified resin showed shorter surface dry time but longer hard dry time than the unmodified alkyd resin coating.     

Remediation,land use,and risk at Hanford

U.S. Department of Energy (US DOE) remediation responsibilities include the Hanford site in Washington State. Cleanup is governed by the Tri‐Party Agreement (TPA) between the US DOE as the responsible party and the U.S. Environmental Protection Agency and Washington State Department of Ecology as joint regulators. In 2003, the US DOE desired to implement a “Risk‐Based End State” (RBES) policy at Hanford, with remediation measures driven by acceptable risk standards using exposure scenarios based on the 1999 Hanford Comprehensive Land‐Use Plan. Facing resistance from regulators and stakeholders, the US DOE solicited public input on its policy. This led to a Hanford Site End State Vision in 2005 and a commitment that the TPA would continue to control remediation. This article describes how regulator and public participation modified RBES to an end‐state vision. © 2010 Wiley Periodicals, Inc.     

Comparison of selected nutrients and bacteria from common contiguous soils inside and outside swine lagoon effluent spray fields after long-term use

Swine (Sus scofa domestica) lagoon effluent is a valuable resource. In the U.S. Mid-South it is applied from April to September to fertilize grass hay in spray-irrigated fields. Lagoon levels of nutrients and bacteria, and soil levels of nutrients have been documented, but little was known of effluent bacterial levels in soil. The present study examined levels of selected effluent bacteria and nutrients in soils inside and outside spray fields after >15 yr of effluent irrigation. Samples were collected February to March 2009 from contiguous soils spanning adjacent irrigated and nonirrigated areas. Separate soil cores for bacterial and nutrient tests were collected in pairs <10 cm apart. Five cores each were collected at 15-m intervals and combined, respectively, to comprise inside and outside samples from each of 20 soils (four each from five farms/spray fields). Analyses of data combined across all soils showed higher pH and Mehlich-3-extracrable (M3-) P, Mg, K, Na, Cu, and Zn inside than outside spray fields, while total N, total C, M3-Ca, and M3-Mn did not differ. Bacterial levels were higher inside than outside spray fields for heterotrophic plate counts, thermotolerant coliforms, Staphylococcus spp., and Clostridium perfringens, but levels of Escherichia coli and Enterococcus spp. were not different. Cultural presence/absence tests for three pathogens (Listeria spp., Campylobacter spp., and Salmonella spp.) detected only Listeria spp., which did not differ inside (23% positive samples) and outside (28% positive). Molecular tests detected all three pathogens at low levels that were not different inside and outside. We found no evidence of cumulative buildup of Campylobacter spp., Listeria spp., or Salmonela s. in spray field soils.