Preparing future engineers for challenges of the 21st century: Sustainable engineering

The field of engineering is changing rapidly as the growing global population puts added demands on the earth's resources: engineering decisions must now account for limitations in materials and energy as well as the need to reduce discharges of wastes. This means educators must revise courses and curricula so engineering graduates are prepared for the new challenges as practicing engineers. The Center for Sustainable Engineering has been established to help faculty members accommodate such changes through workshops and new educational materials, including a free access website with peer-reviewed materials.     

Global warming contributions from wheat,sheep meat and wool production in Victoria,Australia – a life cycle assessment

This paper compares the life cycle global warming potential of three of Australia’s important agricultural production activities – the production of wheat, meat and wool in grazed subterranean clover (sub-clover) dominant pasture and mixed pasture (perennial ryegrass/phalaris/sub-clover/grass and cape weed) systems. Two major stages are presented in this life cycle assessment (LCA) analysis: pre-farm, and on-farm. The pre-farm stage includes greenhouse gas (GHG) emissions from agricultural machinery, fertilizer, and pesticide production and the emissions from the transportation of these inputs to paddock. The on-farm stage includes GHG emissions due to diesel use in on-farm transport and processing (e.g. seeding, spraying, harvesting, topdressing, sheep shearing), and non-CO₂ (nitrous oxide (N₂O), and methane (CH₄)) emissions from pastures and crop grazing of lambs.The functional unit of this life cycle analysis is the GHG emissions (carbon dioxide equivalents – CO₂ -e) from 1 kg of wheat, sheep meat and wool produced from sub-clover, wheat and mixed pasture plots. The GHG emissions (e.g. CO₂, N₂O and CH₄ emission) from the production, transportation and use of inputs (e.g. fertilizer, pesticide, farm machinery operation) during pre-farm and on-farm stages are also included. The life cycle GHG emissions of 1 kg of wool is significantly higher than that of wheat and sheep meat. The LCA analysis identified that the on-farm stage contributed the most significant portion of total GHG emissions from the production of wheat, sheep meat and wool. This LCA analysis also identified that CH₄ emissions from enteric methane production and from the decomposition of manure accounted for a significant portion of the total emissions from sub-clover and mixed pasture production, whilst N₂O emissions from the soil have been found to be the major source of GHG emissions from wheat production.     

Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

MR imaging of the fetal musculoskeletal system

Magnetic resonance imaging (MRI) appears to be increasingly used, in addition to standard ultrasonography for the diagnosis of abnormalities in utero. Previous studies have recently drawn attention to the technical refinement of MRI to visualize the fetal bones and muscles. Beyond commonly used T2-weighted MRI, echoplanar, thick-slab T2-weighted and dynamic sequences, and three-dimensional MRI techniques, are about to provide new imaging insights into the normal and the pathological musculoskeletal system of the fetus. This review emphasizes the potential significance of MRI in the visualization of the fetal musculoskeletal system. © 2012 John Wiley & Sons, Ltd.     

Particulate matter and metals partitioning in highway rainfall-runoff

This study investigated the particulate matter (PM) and metals in highway dry deposition and rainfall-runoff as a function of hydrologic transport and settling on an event basis. Events were differentiated as mass-limited (ML) and flow-limited (FL). Results indicate that unique and separate suspended sediment concentration (SSC) relationships with turbidity occurred for ML and FL events. Sixty minutes of quiescent settling produced a single SSC-turbidity relationship for all events. ML events transport higher proportions of settleable and sediment PM while FL events transported relatively higher suspended PM. For batch clarification with one hour of settling, ML events had generally higher treatment efficiencies compared to FL events for the same settling conditions. Highway dry deposition PM was hetero-disperse and coarse (d _{50 m} = 304 μm). Results indicate that the acidic rainfall is not a significant contributor to metals in runoff but is capable of leaching metals from dry deposition PM into runoff. Partitioning in retained runoff resulted in a particulate-bound predominance for most metals except Ca and Mg. While the finer fraction of dry deposition PM (< 75 μm) generates the highest metal concentrations, the highest metal mass is associated with the coarser fraction (> 75 μm).     

Changes in functional structure of soil bacterial communities due to fungicide and insecticide applications in canola

The fungicide vinclozolin and insecticide λ-cyhalothrin are widely used to control canola (Brassica spp.) diseases and insect pests, respectively, in Canada. We investigated non-target effects of these pesticides, applied at recommended rates, on soil microbial biomass, functional bacterial diversity and functional community structure of soil bacteria (by evaluating patterns of C substrate utilization) in canola rhizosphere and bulk soil at three locations in Alberta from 2002 to 2004. Experimental treatments were (a) untreated control, (b) vinclozolin fungicide foliar application, (c) λ-cyhalothrin insecticide foliar application, and (d) vinclozolin and λ-cyhalothrin applications. No significant pesticide effects on soil microbial biomass or functional bacterial diversity were observed, but the functional structures of soil bacteria were altered. In 1 of 12 cases, the control treatment had a different soil bacterial community structure from the 3 pesticide treatments. The fungicide treatment had different bacterial community structures from the control or insecticide treatments in 3 of 12 cases, the insecticide treatment had different community structures from the control or fungicide treatments in 4 of 12 cases, and the combined fungicide and insecticide treatment had different community structures from the other treatments in 3 of 12 cases. Therefore, evaluating soil bacterial functional structures revealed pesticide effects that were not detected when bacterial diversity or microbial biomass were measured in canola rhizosphere or bulk soil.     

Recilia banda Kramer (Hemiptera: Cicadellidae), a vector of Napier stunt phytoplasma in Kenya

Napier grass (Pennisetum purpureum) is the most important fodder crop in smallholder dairy production systems in East Africa, characterized by small zero-grazing units. It is also an important trap crop used in the management of cereal stemborers in maize in the region. However, production of Napier grass in the region is severely constrained by Napier stunt disease. The etiology of the disease is known to be a phytoplasma, 16SrXI strain. However, the putative insect vector was yet unknown. We sampled and identified five leafhopper and three planthopper species associated with Napier grass and used them as candidates in pathogen transmission experiments. Polymerase chain reaction (PCR), based on the highly conserved 16S gene, primed by P1/P6-R16F2n/R16R2 nested primer sets was used to diagnose phytoplasma on test plants and insects, before and after transmission experiments. Healthy plants were exposed for 60 days to insects that had fed on diseased plants and acquired phytoplasma. The plants were then incubated for another 30 days. Nested PCR analyses showed that 58.3% of plants exposed to Recilia banda Kramer (Hemiptera: Cicadellidae) were positive for phytoplasma and developed characteristic stunt disease symptoms while 60% of R. banda insect samples were similarly phytoplasma positive. We compared the nucleotide sequences of the phytoplasma isolated from R. banda, Napier grass on which these insects were fed, and Napier grass infected by R. banda, and found them to be virtually identical. The results confirm that R. banda transmits Napier stunt phytoplasma in western Kenya, and may be the key vector of Napier stunt disease in this region.     

Pastoral farmland habitat diversity in south-east Ireland

In this study, habitat surveys were undertaken on 50 grass-based farms in SE Ireland and data digitised onto aerial photography. Additional data i.e. stocking rates, and participation (or otherwise) in the Irish Rural Environment Protection Scheme (REPS) were collected and analysed as possible explanatory variables for farm habitat composition.Results indicated that approximately 14.3% of the land area of sampled farms comprised of semi-natural habitat types, a proportion substantially greater than has been reported for many other European countries. The most frequently recorded semi-natural habitats included, field boundaries, scrub, and deciduous and riparian woodlands.Multivariate analysis of farm habitat configuration showed a strong dichotomy between dairy and non-dairy farming systems. Habitats such as intensively managed grassland and built ground were closely associated with dairy-based enterprises. In contrast, the incidence of other habitat types was associated with non-dairy and/or REPS participating enterprises. The ecological quality of field boundaries as assessed by the Field Boundary Evaluation and Grading System (FBEGS) Index was significantly greater on dairy, compared with dry-stock farms.This dichotomy in farm habitat composition is not reflected within current Agri-Environment (AE) policy. Integration of locally important drivers of habitat diversity into the design and implementation of AE policy, is integral to the successful performance of AE schemes.     

Migrating an incident reporting system to a CCPS process safety metrics model

A major chemical company established a formal incident investigation and reporting system several years ago. The original system focused heavily on worker-related injuries, illnesses, and near-misses and was used primarily to track statistics reportable to the Occupational Safety and Health Administration (OSHA). This Occupational Injury and Illness (OII) approach has been recognized to be an ineffective tool for measuring, predicting, and preventing process safety incidents. The Center for Chemical Process Safety (CCPS) recently published guidelines on how to establish safety metrics for the measurement and reduction of process safety incidents. The process safety metrics approach relies upon leading and lagging metrics to improve organization process safety. This paper is a case study of the analysis of one organization’s incident database, which represents approximately five years of data from over a dozen facilities. The aim of this investigation was to extract useful process safety metrics from the incident investigation and reporting system, which would be pertinent to the types of process units and process functions at these facilities. This paper will discuss the approach taken to extract process incident information from an OII-based database and present the difficulties of performing an analysis on such a database. This paper provides guidance on how to migrate an existing OII-based reporting system to a program that includes process safety metrics in accordance with industry best practices.