Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model,CMAQ 5.01

The Community Multiscale Air Quality (CMAQ) modeling system Version 5.0 (CMAQv5.0) was released by the U.S. Environmental Protection Agency (EPA) in February 2012, with an interim release (v5.01) in July 2012. Because CMAQ is a community model, the EPA encourages the development of proven alternative science treatments by external scientists and developers that can be incorporated as part of an official CMAQ release. This paper describes the implementation, evaluation, and testing of a plume-in-grid (PinG) module in CMAQ 5.01. The PinG module, also referred to as Advanced Plume Treatment (APT), provides the capability of resolving sub-grid-scale processes, such as the transport and chemistry of point-source plumes, in a grid model. The new PinG module in CMAQ 5.01 is applied and evaluated for two 15-day summer and winter periods in 2005 to the eastern United States, and the results are compared with those from the base CMAQ 5.01. Eighteen large point sources of NOx in the eastern United States were selected for explicit plume treatment with APT in the PinG simulation. The results show that overall model performance is negligibly affected when PinG treatment is included. However, the PinG model predicts significantly different contributions of the 18 sources to pollutant concentrations and deposition downwind of the point sources compared to the base model.

Implications: This study describes the incorporation of a plume-in-grid (PinG) capability within the latest version of the EPA grid model, CMAQ. The capability addresses the inherent limitation of the grid model to resolve processes, such as the evolution of point-source plumes, which occur at scales much smaller than the grid resolution. The base grid model and the PinG version predict different source contributions to ozone and PM_2.5 concentrations that need to be considered when source attribution studies are conducted to determine the impacts of large point sources on downwind concentrations and deposition of primary and secondary pollutants.     

Listeria monocytogenes batch culture growth response to metabolic inhibitors

In certain environments nutrient and energy sources available to microorganisms can be limited. Foodborne pathogens must efficiently adapt in order to be successfully transmitted through the food chain to their hosts. For the intracellular foodborne pathogen Listeria monocytogenes, little is known regarding its response to nutrient/energy-limiting conditions. The alternative stress responsive sigma factor σ^B has been reported to contribute to survival under specific stresses. Therefore, the effects of several metabolic inhibitors on growth of L. monocytogenes wild-type and a ΔsigB mutant were examined. In the absence of inhibitors, both strains reached stationary phase after 18 h at 23°C and 10 h at 37°C. All of the metabolic inhibitors slowed growth of either strain, with few differences observed among the different inhibitors.     

Synthetic SO2 Sorbents for Fluidized-Bed Coal Combustors

The information presented in this paper is directed to engineers who are involved with environmental emissions from coal conversion plants. Synthetic sorbents were investigated as an alternative to natural sorbents (limestone) for the removal of SO₂ from the combustion gas in a fluidized-bed coal combustor. The sulfation rate of a synthetic sorbent, CaO in α-AI₂O₃, was determined as a function of gas composition, temperature, and calcium concentration in the sorbent. The reaction was found to be diffusion-controlled above 850°C and kinetically controlled at lower temperatures. The physical characteristics of the support material have a major effect oh the sulfation kinetics. Porosity measurements indicated that supports containing large pores (>0.2 µm) produced sorbents having high sulfation rates and that pores with diameters less than 0.2 µm did not contribute significantly to the capture of SO₂. The sorbents SrO in α-AI₂O₃ and BaO in α-AI₂O₃ had lower SO₂ capture rates than did CaO in α-AI₂O₃. The alkali metal oxide sorbents K₂O and Na₂O in α-AI₂O₃ captured SO₂ much faster than did the alkaline earth metal oxides.     

Toxic Trace Elements Associated with Airborne Particulate Matter: A Review

This article provides a concise review of published literature pertaining to sampling and analytical methodologies, aerometric studies, source identification techniques and modeling activities for the elements arsenic, cadmium, nickel, lead, vanadium, zinc, cobalt, chromium, copper, iron, mercury, manganese, selenium and antimony, and their compounds, associated with airborne particulate matter. Sampling techniques discussed include filtration and inertial separation. Analytical methodologies such as atomic absorption and atomic emission spectrometry, neutron activation analysis, and X-ray fluorescence spectrometry are summarized. Data on atmospheric levels of 14 trace elements are presented in summary form from numerous studies in remote, rural and urban areas, and generally indicate that concentrations measured at rural locations are several orders of magnitude lower than those measured for urban areas. Source identification methodologies are discussed in terms of advantages and disadvantages, and various applications are cited for the following categories: size differentiation, enrichment factors, chemical mass balance, and multivariate models. Provided that reliable trace element data are available for both the source and the receptor, chemical mass balance and multivariate methods can account for up to 80 percent of all sources contributing to the observed ambient air concentration. Wet and dry deposition processes are reviewed and environmental measurement data are provided for each element for remote, rural and urban locations. Both wet and dry deposition fluxes need to be considered for trace elements when estimating the total annual amounts of various trace elements deposited at a particular locale. Global cycles and trace element budgets are introduced in the context of the types of models currently in use. Limitations include inadequate global scale surveys of heavy metal concentrations and the lack of knowledge of sources and/or sinks.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 10. Potential Ambient O3 Standards to Limit Soybean Crop Reduction

Soybean percent crop reduction was estimated as a function of ambient O₃ concentrations for each of 80 agricultural sites in the National Aerometric Data Bank (NADB) for each available year of data for years 1981-1985. Fourteen O₃ concentration statistics were calculated for each of the resulting 320 site-years of data. The two statistics that correlated best with estimated crop reduction were an effective mean O₃ concentration (1 percent of variance unexplained) and an arithmetic mean O₃ concentration (4 percent unexplained). The worst correlation of the 14 was for the statistic used in the present O₃ National Ambient Air Quality Standard (NAAQS), the second highest daily maximum 1-h O₃ concentration (42 percent unexplained). The number of site-years for estimated percent soybean yield reductions was plotted versus increasing O₃ concentrations for each of the 14 O₃ statistics. A maximum crop reduction line was drawn on each plot. These lines were used to estimate (and list) potential ambient O₃ standards for each of the 14 statistics that would limit soybean crop reduction at agricultural. NADB sites to 5, 10, 15, or 20 percent.     

Compositions and greenhouse gas emission factors of flared and vented gas in the Western Canadian Sedimentary Basin

A significant obstacle in evaluating mitigation strategies for flaring and venting in the upstream oil and gas industry is the lack of publicly available data on the chemical composition of the gas. This information is required to determine the economic value of the gas, infrastructure and processing requirements, and potential emissions or emissions credits, all of which have significant impact on the economics of such strategies. This paper describes a method for estimating the composition of solution gas being flared and vented at individual facilities, and presents results derived for Alberta, Canada, which sits at the heart of the Western Canadian Sedimentary Basin. Using large amounts of raw data obtained through the Alberta Energy Resources Conservation Board, a relational database was created and specialized queries were developed to link production stream data, raw gas samples, and geography to create production-linked gas composition profiles for approximately half of the currently active facilities. These were used to create composition maps for the entire region, to which the remaining facilities with unknown compositions were geographically linked. The derived data were used to compute a range of solution gas composition profiles and greenhouse gas emission factors, providing new insight into flaring and venting in the region and enabling informed analysis of future management and mitigation strategies.

Implications: Accurate and transparent determination of environmental impacts of flaring and venting of gas associated with oil production, and potential benefits of mitigation, is severely hampered by the lack of publicly available gas composition data. In jurisdictions within the Western Canadian Sedimentary Basin, frameworks exist for regulating and trading carbon offset credits but current potential for mitigation is limited by a lack of standardized methods for calculating CO₂ equivalent emissions. The composition and emission factor data derived in this paper will be useful to industry, regulators, policy researchers, and entrepreneurs seeking statistically significant and openly available data necessary to manage and mitigate upstream flaring and venting activity and estimate greenhouse gas impacts.     

An analysis of flaring and venting activity in the Alberta upstream oil and gas industry

Alberta, Canada, is an important global producer of petroleum resources. In association with this production, large amounts of gas (1.14 billion m3 in 2008) are flared or vented. Although the amount of flaring and venting has been measurably reduced since 2002, data from 2005 reveal sharp increases in venting, which have important implications in terms of resource conservation and greenhouse gas emissions (which exceeded 8 million tonnes of carbon dioxide equivalent in 2008). With use of extensive monthly production data for 18,203 active batteries spanning the years 2002-2008 obtained in close cooperation with the Alberta Energy Resources Conservation Board, a detailed analysis has been completed to examine activity patterns of flaring and venting and reasons behind these trends in the Alberta upstream oil and gas industry. In any given year, approximately 6000 batteries reported flaring and/or venting, but the distribution of volumes flared and vented at individual sites was highly skewed, such that small numbers of sites handled large fractions of the total gas flaring and venting in the Province. Examination of month-to-month volume variability at individual sites, cast in terms of a nominal turndown ratio that would be required for a compressor to capture that gas and direct it into a pipeline, further revealed that volumes at a majority of sites were reasonably stable and there was no evidence that larger or more stable sites had been preferentially reduced, leaving potential barriers to future mitigation. Through linking of geospatial data with production data coupled with additional statistical analysis, the 31.2% increase in venting volumes since 2005 was revealed to be predominantly associated with increased production of heavier oils and bitumen in the Lloydminster region of the Province. Overall, the data suggest that quite significant reductions in flaring and venting could be realized by seeking mitigation solutions for only the largest batteries in the Province.     

Accumulation of 14C-trinitrotoluene and related nonextractable (bound) residues in Eisenia fetida

To determine if trinitrotoluene (TNT) forms nonextractable residues in earthworms and to measure the relative degree of accumulation as compared to TNT and its deaminated metabolites, Eisenia fetida was exposed to ¹⁴C-TNT using dermal contact to filter paper or exposure to soil. Nonextractable residues made up 32-68% of total body burden depending on exposure media and depuration time. Parent TNT accounted for less than 3% of radioactivity, while ADNTs accounted for 7-38%. Elimination half-lives were 61-120 h for TNT, ADNTs, and DANTs, which was significantly lower than the half-lives found for nonextractable residues, 201-240 h. However, over 80% of the nonextractable residue was solubilized using weak acid (pH 2). Based on our findings that TNT accumulation occurs primarily as nonextractable residues, which have a longer half-life, and that nonextractable residues can be solubilized, we propose that nonextractable residues could be used as a selective biomarker for assessing TNT contamination.     

Community vulnerability and resilience in disaster risk reduction: an example from Phojal Nalla,Himachal Pradesh,India

International Disaster Risk Reduction Frameworks and Indian Plans advocate shared responsibility for reducing disaster risk, in which community vulnerability and resilience conditions are central. This paper presents a case study from the Indian Himalaya (Kullu District) of community vulnerability and resilience conditions following damaging floods, primarily the 1994 Phojal Nalla flood, through the concepts of community heritage and capital. Data were collected in the period 2013–2016, using semi-structured interviews (n?=?129), village reconnaissance and archival/contemporary data searches. The connections between heritage, capital, vulnerability and resilience are complex, but results demonstrate ‘knowledge’ is the principal driver of resilience conditions, via facets of heritage (e.g. religious infrastructure and activities, traditional architectural vernacular, and multi-generational attachments to place) and capital (e.g. income diversification, access to communication technologies, societal welfare measures and positive interactions with water). Persisting vulnerabilities stem from differential access to and implementation of best practice knowledge, governed by social, economic and political conditions. Further improvements in risk reduction require greater consideration of the following: (1) the integration of community local knowledge into the overall disaster management process; (2) the opportunities offered by mobile phone and other technologies for generating and sharing knowledge across society; and (3) the value of under-utilised knowledge of past disaster events, assembled from a systematic evaluation of oral, documentary and landscape evidence, to risk reduction.