Evaluating portable infrared spectrometers for measuring the silica content of coal dust

Miners face a variety of respiratory hazards while on the job, including exposure to silica dust which can lead to silicosis, a potentially fatal lung disease. Currently, field-collected filter samples of silica are sent for laboratory analysis and the results take weeks to be reported. Since the mining workplace is constantly moving into new and often different geological strata with changing silica levels, more timely data on silica levels in mining workplaces could help reduce exposures. Improvements in infrared (IR) spectroscopy open the prospect for end-of-shift silica measurements at mine sites. Two field-portable IR spectrometers were evaluated for their ability to quantify the mass of silica on filter samples loaded with known amounts of either silica or silica-bearing coal dust (silica content ranging from 10-200 μg/filter). Analyses included a scheme to correct for the presence of kaolin, which is a confounder for IR analysis of silica. IR measurements of the samples were compared to parallel measurements derived using the laboratory-based U.S. Mine Safety and Health Administration P7 analytical method. Linear correlations between Fourier transform infrared (FTIR) and P7 data yielded slopes in the range of 0.90-0.97 with minimal bias. Data from a variable filter array spectrometer did not correlate as well, mainly due to poor wavelength resolution compared to the FTIR instrument. This work has shown that FTIR spectrometry has the potential to reasonably estimate the silica exposure of miners if employed in an end-of-shift method.     

Implementing infrared determination of quartz particulates on novel filters for a prototype dust monitor

Research by the National Institute for Occupational Safety and Health (NIOSH) has pursued quartz analysis for the specialized filter assemblies of a new worker-wearable personal dust monitor (PDM). The PDM is a real-time instrument utilizing a tapered element oscillating microbalance (TEOM). Standard fiberglass TEOM filters cannot accommodate the desired P-7 infrared analytical method used by the Mine Safety and Health Administration (MSHA). Novel filter materials were tested with the objective of demonstrating this type of analysis. Low temperature ashing and spectrometric examination were employed, revealing that nylon fiber candidate filters left minimal residual ash and produced no significant spectral interference. Avoiding titanium dioxide in all filter materials proved to be a key requirement. Fine quartz particulates were collected on prototype filters in a Marple chamber, either open-faced or through PDMs during test runs. The filters were then subjected to MSHA P-7 analysis and the spectrometrically based analytical results for quartz mass were compared to reference measurements. Also, PDM instrumental mass readings were compared to filter gravimetric measurements. Results suggest that the P-7 method is adaptable to variations in filter materials and that quartz dust analysis by the P-7 method when utilizing the new ashable PDM filters can have accuracy and precision within 10% and 4%, respectively. This is within the declared 13% accuracy and 7-10% precision of the P-7 method itself. Instrument mass readings had modest positive bias but met NIOSH accuracy criteria. Continued work with specialized PDM filters is merited, as they are a new type of TEOM sample amenable to ashing analysis of particulates.     

The impact of traditional coffee processing on river water quality in Ethiopia and the urgency of adopting sound environmental practices

Although waste from coffee processing is a valuable resource to make biogas, compost, and nutrient-rich animal food, it is usually dumped into nearby water courses. We carried out water quality assessment at 44 sampling sites along 18 rivers that receive untreated waste from 23 coffee pulping and processing plants in Jimma Zone, Ethiopia. Twenty upstream sampling sites free from coffee waste impact served as control, and 24 downstream sampling sites affected by coffee waste were selected for comparison. Physicochemical and biological results revealed a significant river water quality deterioration as a result of disposing untreated coffee waste into running water courses. During coffee-processing (wet) season, the highest organic load (1,900?mg/l), measured as biochemical oxygen demand, depleted dissolved oxygen (DO) to a level less than 0.01?mg/l, and thus curtailed nitrification. During off season, oxygen started to recuperate and augmented nitrification. The shift from significantly elevated organic load and reduced DO in the wet season to increased nitrate in the off season was found to be the determining factor for the difference in macroinvertebrate community structure as verified by ordination analysis. Macroinvertebrate diversity was significantly reduced in impacted sites during the wet season contrary to the off season. However, there was a significant difference in the ratio of sensitive to pollution-tolerant taxa in the off season, which remained depreciated in the longer term. This study highlights the urgency of research exploring on the feasibility of adopting appropriate pollution abatement technologies to implement ecologically sound coffee-processing systems in coffee-growing regions of Ethiopia.     

Assessment of sampling and analytical uncertainty of trace element contents in arable field soils

Assessment of trace element contents in soils is required in Germany (and other countries) before sewage sludge application on arable soils. The reliability of measured element contents is affected by measurement uncertainty, which consists of components due to (1) sampling, (2) laboratory repeatability (intra-lab) and (3) reproducibility (between-lab). A complete characterization of average trace element contents in field soils should encompass the uncertainty of all these components. The objectives of this study were to elucidate the magnitude and relative proportions of uncertainty components for the metals As, B, Cd, Co, Cr, Mo, Ni, Pb, Tl and Zn in three arable fields of different field-scale heterogeneity, based on a collaborative trial (CT) (standardized procedure) and two sampling proficiency tests (PT) (individual sampling procedure). To obtain reference values and estimates of field-scale heterogeneity, a detailed reference sampling was conducted. Components of uncertainty (sampling person, sampling repetition, laboratory) were estimated by variance component analysis, whereas reproducibility uncertainty was estimated using results from numerous laboratory proficiency tests. Sampling uncertainty in general increased with field-scale heterogeneity; however, total uncertainty was mostly dominated by (total) laboratory uncertainty. Reproducibility analytical uncertainty was on average by a factor of about 3 higher than repeatability uncertainty. Therefore, analysis within one single laboratory and, for heterogeneous fields, a reduction of sampling uncertainty (for instance by larger numbers of sample increments and/or a denser coverage of the field area) would be most effective to reduce total uncertainty. On the other hand, when only intra-laboratory analytical uncertainty was considered, total sampling uncertainty on average prevailed over analytical uncertainty by a factor of 2. Both sampling and laboratory repeatability uncertainty were highly variable depending not only on the analyte but also on the field and the sampling trial. Comparison of PT with CT sampling suggests that standardization of sampling protocols reduces sampling uncertainty, especially for fields of low heterogeneity.     

Biomanipulation of hypereutrophic ponds: when it works and why it fails

Phytoplankton, zooplankton, submerged vegetation and main nutrients have been monitored in 48 eutrophic ponds from the Brussels Capital Region (Belgium) between 2005 and 2008. Nine ponds have been biomanipulated in order to improve their ecological quality and prevent the occurrence of noxious cyanobacterial blooms. The 4-year study of a large number of ponds allowed identification of the factors having the strongest influence on phytoplankton growth. Continuous monitoring of the biomanipulated ponds allowed the significance of changes caused by biomanipulation to be tested as well as the main reasons of biomanipulation successes and failures to be elucidated. The main factors controlling phytoplankton in the ponds studied appeared to be grazing by large cladocerans and inhibition of phytoplankton growth by submerged vegetation. Biomanipulation resulted in a significant decrease in phytoplankton biomass in general and biomass of bloom-forming cyanobacteria in particular that were associated with a significant increase in large Cladocera density and size. In six out of nine ponds biomanipulation resulted in the restoration of submerged vegetation. The maintenance of the restored clearwater state in the biomanipulated ponds was strongly dependent on fish recolonisation and nutrient level. In the absence of fish, the clearwater state could be maintained by submerged vegetation or large zooplankton grazing alone. In case of fish recolonisation, restoration of extensive submerged vegetation could buffer, to a considerable degree, the effect of fish except for ponds with high nutrient levels.     

Screening organic chemicals in commerce for emissions in the context of environmental and human exposure

Quantitative knowledge of organic chemical release into the environment is essential to understand and predict human exposure as well as to develop rational control strategies for any substances of concern. While significant efforts have been invested to characterize and screen organic chemicals for hazardous properties, relatively less effort has been directed toward estimating emissions and hence also risks. Here, a rapid throughput method to estimate emissions of discrete organic chemicals in commerce has been developed, applied and evaluated to support screening studies aimed at ranking and identifying chemicals of potential concern. The method builds upon information in the European Union Technical Guidance Document and utilizes information on quantities in commerce (production and/or import rates), chemical function (use patterns) and physical-chemical properties to estimate emissions to air, soil and water within the OECD for five stages of the chemical life-cycle. The method is applied to 16,029 discrete substances (identified by CAS numbers) from five national and international high production volume lists. As access to consistent input data remains fragmented or even impossible, particular attention is given to estimating, evaluating and discussing uncertainties in the resulting emission scenarios. The uncertainty for individual substances typically spans 3 to 4 orders of magnitude for this initial tier screening method. Information on uncertainties in emissions is useful as any screening or categorization methods which solely rely on threshold values are at risk of leading to a significant number of either false positives or false negatives. A limited evaluation of the screening method's estimates for a sub-set of about 100 substances, compared against independent and more detailed emission scenarios presented in various European Risk Assessment Reports, highlights that up-to-date and accurate information on quantities in commerce as well as a detailed breakdown on chemical function are critically needed for developing more realistic emission scenarios.     

The Application of IUCN Red List Criteria at Regional Levels

This paper represents a work in progress by the World Conservation Union (IUCN). Earlier drafts of the work have appeared in IUCN publications, but the "International Issues" section of Conservation Biology seems an appropriate and important place to publish the penultimate version of the document. Comments on this issue in general or on the approach taken by the IUCN should be sent to the authors directly.
Joshua Ginsburg     

Psychological ownership within the job design context: revision of the job characteristics model

In this paper, we offer a theoretical modification to the Hackman and Oldham (1975) Job Characteristics Model by integrating research on the psychological aspects of job design with emerging theory on psychological ownership. We develop the connection between job design and (a) the motives facilitating psychological ownership, (b) the routes through which psychological ownership emerges, and (c) the individual‐level outcomes (e.g., emotional, attitudinal, motivational, and behavioral) that result from an employee's psychological ownership of his or her job. Our work covers several previously ignored positive and negative effects. We conclude by positioning psychological ownership as a plausible substitute for other proposed mediating psychological states in the job design–employee response relationship. Copyright © 2008 John Wiley & Sons, Ltd.     

Water Quality and Plankton in the United States Nearshore Waters of Lake Huron

Our goal in the development of a nearshore monitoring method has been to evaluate and refine an in situ mapping approach to assess the nearshore waters across the Great Lakes. The report here for Lake Huron is part of a broader effort being conducted across all five Great Lakes. We conducted an intensive survey for the United States nearshore of Lake Huron along a continuous shoreline transect (523?km) from Port Huron, Michigan, to Detour Passage. A depth contour of 20?m was towed with a conductivity-temperature depth profiler, fluorometer, transmissometer, and laser optical plankton counter. Multiple cross-contour tows (10-30?m) on the cruise dates were used to characterize the variability across a broader range of the nearshore. The cross-contour tows were comparable with the alongshore contour indicating that the 20-m contour does a good job of representing the nearshore region (10-30?m). Strong correlations were observed between water quality and spatially associated watershed land use. A repeat tow separated by several weeks investigated temporal variability in spatial patterns within a summer season. Strong correlations were observed across each variable for the temporal repeat across broad- and fine-scale spatial dimensions. The survey results for Lake Huron nearshore are briefly compared with a similar nearshore survey in Lake Superior. The biomass concentrations of lower food web components of Lake Huron were notably approximately 54-59?% of those in Lake Superior. The towed instrumentation survey supported the recent view of a change in Lake Huron to an ultra-oligotrophic state, which has been uncharacteristic in recent history.     

Mapping bundles of ecosystem services reveals distinct types of multifunctionality within a Swedish landscape

Ecosystem services (ES) is a valuable concept to be used in the planning and management of social–ecological landscapes. However, the understanding of the determinant factors affecting the interaction between services in the form of synergies or trade-offs is still limited. We assessed the production of 16 ES across 62 municipalities in the Norrström drainage basin in Sweden. We combined GIS data with publically available information for quantifying and mapping the distribution of services. Additionally, we calculated the diversity of ES for each municipality and used correlations and k-means clustering analyses to assess the existence of ES bundles. We found five distinct types of bundles of ES spatially agglomerated in the landscape that could be explained by regional social and ecological gradients. Human-dominated landscapes were highly multifunctional in our study area and urban densely populated areas were hotspots of cultural services.