Estimating Overall Sample Train Efficiency

A common part of many gas analyses using bubblers is to combine the contents of the first n-1 impingers and analyze them separate from the nth. The nth impinger, yielding as it should a nil result, confirms that all of the sample entering the train was caught and that the concentration calculated therefrom represents the “true” value.

Many a hapless analyst has found himself stuck with nonzero nth impingers on occasion. Bemgloath tb reject the whole test, the analyst will often report the concentration based on the total catch (with appropriate qualifiers, of course). Another common practice is to calculate the percentage of the total catch in the first n-1 impingers. Sometimes this is reported, erroneously, as the sampler efficiency. The true sampler efficiency cannot be known (if it is less than 100%) because the presence of sample in the last impinger indicates that some unknown amount has passed through the train entirely.     

Performance and Diagnostic Evaluation of Ozone Predictions by the Eta-Community Multiscale Air Quality Forecast System during the 2002 New England Air Quality Study

Abstract

A real-time air quality forecasting system (Eta-Community Multiscale Air Quality [CMAQ] model suite) has been developed by linking the National Centers for Environmental Estimation Eta model to the U.S. Environmental Protection Agency (EPA) CMAQ model. This work presents results from the application of the Eta-CMAQ modeling system for forecasting ozone (O₃) over the Northeastern United States during the 2002 New England Air Quality Study (NEAQS). Spatial and temporal performance of the Eta-CMAQ model for O₃ was evaluated by comparison with observations from the EPA Air Quality System (AQS) network. This study also examines the ability of the model to simulate the processes governing the distributions of tropospheric O₃ on the basis of the intensive datasets obtained at the four Atmospheric Investigation, Regional Modeling, Analysis, and Estimation (AIRMAP) and Harvard Forest (HF) surface sites. The episode analysis reveals that the model captured the buildup of O₃ concentrations over the northeastern domain from August 11 and reproduced the spatial distributions of observed O₃ very well for the daytime (8:00 p.m.) of both August 8 and 12 with most of normalized mean bias (NMB) within [H11006]20%. The model reproduced 53.3% of the observed hourly O₃ within a factor of 1.5 with NMB of 29.7% and normalized mean error of 46.9% at the 342 AQS sites.The comparison of modeled and observed lidar O₃ vertical profiles shows that whereas the model reproduced the observed vertical structure, it tended to overestimate at higher altitude. The model reproduced 64 –77% of observed NO₂ photolysis rate values within a factor of 1.5 at the AIRMAP sites. At the HF site, comparison of modeled and observed O₃/nitrogen oxide (NO_x) ratios suggests that the site is mainly under strongly NO_x-sensitive conditions (>53%). It was found that the modeled lower limits of the O₃ production efficiency values (inferred from O₃-CO correlation) are close to the observations.     

Ozone induced leaf loss and decreased leaf production of European Holly (Ilex aquifolium L.) over multiple seasons

European Holly (Ilex aquifolium L.) was used to study the impact of one short (28 day) ozone fumigation episode on leaf production, leaf loss and stomatal conductance (g(s)), in order to explore potential longer term effects over 3 growing seasons. Young I. aquifolium plants received an episode of either charcoal-filtered air or charcoal-filtered air with 70 nl l(-1) O(3) added for 7 h d(-1) over a 28 day period from June 15th 1996, then placed into ambient environment, Stoke-on-Trent, U.K. Data were collected per leaf cohort over the next three growing seasons. Ozone exposure significantly increased leaf loss and stomatal conductance and reduced leaf production over all subsequent seasons. Impact of the initial ozone stress was still detected in leaves that had no direct experimental ozone exposure. This study has shown the potential of ozone to introduce long-term phenological perturbations into ecosystems by influencing productivity over a number of seasons.     

Quantifying the importance of diffuse minewater pollution in a historically heavily coal mined catchment

There has been considerable progress in developing treatment systems for point sources of minewater pollution in recent years; however, there remains a knowledge gap in the characterisation and remediation of diffuse minewater sources. Data are presented from the River Gaunless catchment, a historically heavily coal mined catchment in the northeast of England. Instream iron (Fe) loadings were monitored alongside loadings arising from point minewater discharges over a 12-month period to assess the dynamic importance of diffuse sources of minewater pollution. In low flow, diffuse sources account for around 50% of instream loading, a proportion which increases to 98% in high flow conditions. The low flow sources appear to be dominated by direct discharge of contaminated groundwater to surface waters in lower reaches of the catchment. In high flow, resuspended Fe-rich sediments, which are both naturally occurring and derived from historic mining, become the dominant diffuse source of Fe in the water column.     

Congener-specific egg contribution of polychlorinated biphenyls to nestlings in two passerine species

Quantifying polychlorinated biphenyl (PCB) residues in nestlings of avian species is a common method for assessing trophic transfer and risk at PCB-contaminated sites. The proportion of nestling PCB mass due to maternal transfer is often accounted for by subtracting total PCB mass in eggs from nestlings. However, variation in physicochemical properties and metabolism among congeners may lead to differences between egg contribution based on total PCBs and dioxin-like congeners. We examined congener-specific variation in contribution of PCBs from eggs to nestlings in tree swallows and European starlings. Egg contribution of total PCB mass was 14.3 and 16.2%, respectively, whereas contribution based on dioxin-like congeners was 14.8 and 13.6%, respectively. These data suggest that using total PCB mass in eggs to adjust estimates of PCB accumulation in nestlings may not reflect patterns for dioxin-like congeners, potentially over or under-estimating the risk of toxicity of PCBs.     

Geomechanical analysis of the Naylor Field,Otway Basin,Australia: Implications for CO2 injection and storage

A geomechanical assessment of the Naylor Field, Otway Basin, Australia has been undertaken to investigate the possible geomechanical effects of CO₂ injection and storage. The study aims to evaluate the geomechanical behaviour of the caprock/reservoir system and to estimate the risk of fault reactivation. The stress regime in the onshore Victorian Otway Basin is inferred to be strike–slip if the maximum horizontal stress is calculated using frictional limits and DITF (drilling induced tensile fracture) occurrence, or normal if maximum horizontal stress is based on analysis of dipole sonic log data. The NW–SE maximum horizontal stress orientation (142°N) determined from a resistivity image log is broadly consistent with previous estimates and confirms a NW–SE maximum horizontal stress orientation for the Otway Basin.An analytical geomechanical solution is used to describe stress changes in the subsurface of the Naylor Field. The computed reservoir stress path for the Naylor Field is then incorporated into fault reactivation analysis to estimate the minimum pore pressure increase required to cause fault reactivation (ΔP_p).The highest reactivation propensity (for critically-oriented faults) ranges from an estimated pore pressure increase (ΔP_p) of 1 MPa to 15.7 MPa (estimated pore pressure of 18.5–33.2 MPa) depending on assumptions made about maximum horizontal stress magnitude, fault strength, reservoir stress path and Biot's coefficient. The critical pore pressure changes for known faults at Naylor Field range from an estimated pore pressure increase (ΔP_p) of 2 MPa to 17 MPa (estimated pore pressure of 19.5–34.5 MPa).     

The release of nanosilver from consumer products used in the home

Nanosilver has become one of the most widely used nanomaterials in consumer products because of its antimicrobial properties. Public concern over the potential adverse effects of nanosilver's environmental release has prompted discussion of federal regulation. In this paper, we assess several classes of consumer products for their silver content and potential to release nanosilver into water, air, or soil. Silver was quantified in a shirt, a medical mask and cloth, toothpaste, shampoo, detergent, a towel, a toy teddy bear, and two humidifiers. Silver concentrations ranged from 1.4 to 270,000 microg Ag g product(-1). Products were washed in 500 mL of tap water to assess the potential release of silver into aqueous environmental matrices (wastewater, surface water, saliva, etc.). Silver was released in quantities up to 45 microg Ag g product(-1), and size fractions were both larger and smaller than 100 nm. Scanning electron microscopy confirmed the presence of nanoparticle silver in most products as well as in the wash water samples. Four products were subjected to a toxicity characterization leaching procedure to assess the release of silver in a landfill. The medical cloth released an amount of silver comparable to the toxicity characterization limit. This paper presents methodologies that can be used to quantify and characterize silver and other nanomaterials in consumer products. The quantities of silver in consumer products can in turn be used to estimate real-world human and environmental exposure levels.