An Overview of EPA’s Quality Assurance Program

Quality Assurance has been defined in many different ways to express concern for the “quality” of the output of some operation or function. For the purpose of this presentation, quality assurance is defined as the sum of those activities within an environmental monitoring or measurement program which are primarily for the purpose of documenting the precision, accuracy, representativeness, and completeness of the data that are produced. Further, we view quality assurance as a management tool which encompasses both administrative and technical functions which generally fall into three categories: (1) Prevention which includes those activities carried out prior to the proper placement and operation of the measurement system; (2) Evaluation which includes the continuous overview and checks on the performance of the systems and operators; and (3) Correction which includes changes made to improve or stabilize the capability and performance of the system.     

Electrostatic Stimulation of Fabric Filtration

The concept of electrostatic stimulation of fabric filtration (ESFF) has been investigated at pilot scale. The pilot unit consisted of a conventional baghouse in parallel with an ESFF baghouse, allowing direct comparison. All results reported in this paper are for pulse-cleaned bags in which the electric field was maintained parallel to the fabric surface. The performance of the ESFF baghouse has been superior to the parallel conventional baghouse by several measures. The ESFF baghouse demonstrated: (1) a reduced rate of pressure drop increase during a filtration cycle, (2) lower residual pressure drop, (3) stable operation at higher face velocities, and (4) improved particle removal efficiency. These benefits can be obtained with only minor modifications to conventional pulse-jet hardware and at low electrical power consumption. The indicated ability to operate at increased face velocities with only modest expenditure for electrical hardware leads to very favorable economic projections.     

Filter Beds: Energy-Efficient Packing Diameter

Factors which help minimize pressure drop at a given level of collection efficiency for a bed packed with roughly spherical collectors are studied here by using the quality factor, the ratio of the single collector collection efficiency to the force per unit area on the single collector. This analysis indicates that energy-efficient designs can be obtained as follows: choose a representative particle size; if impaction predominates, design for an impaction parameter near one; if interception predominates, design for the smallest packing diameters feasible; if gravitational settling predominates, design for the largest packing diameters possible; if diffusion predominates, design for collector Reynolds numbers near 10². Some more general cases are also discussed.     

A Comparison of Mass,Lead, Sulfate,and Nitrate Concentrations in a Field Study Using Dichotomous,Size-Selective,and Standard Hi-Vol Samplers

Air monitoring In the San Francisco Bay Area was carried out to measure outdoor community air concentrations of poly cyclic aromatic hydrocarbons (PAH) and mutagenlc activity (mutagenlclty) In participate organic matter (POM). Monitoring began In 1979 and Is currently conducted at six stations. PAH and mutagenlclty tests were performed on organic extracts prepared from high volume (hl-vol) filters composited every four months, by meteorological season. PAH were determined by high pressure liquid chromatography (HPLC) with fluorescence and ultraviolet detection. Mutagenlclty was measured In the Ames Salmonella bloas-say using strain TA98 with and without metabolic activation. The nine-year mean concentration of benzo(a)pyrene (BaP) was 0.4 ng/m³. The mutagenlcfty of this amount of BaP accounted for only about 0.2% of the observed mutagenicity In POM and other measured PAH accounted for even less. Concentrations of PAH and mutagenlclty were three to nine times higher during the winter than during other seasons. Year-to-year wintertime trends In several PAH were also seen. Early In the 1980s, winter concentrations of BaP and benzo (g,h,i)perylene Increased. However since the mld-1980’s, their concentrations have fallen. The decrease In PAH concentrations may be the result of an Increasing proportion of vehicles with relatively low organic emissions. In contrast to PAH, mutagenlcfty did not show significant year-to-year time trends.     

The Everchanging Air Pollution Control Market

While the United States is the largest single market for air pollution control equipment, it constitutes only about one-third of the total world market. This overview explores the legislative, economic, and technological factors that affect those markets.     

Comparison of Air Pollutant Emissions from Vaporizing and Air Atomizing Waste Oil Heaters

Information presented in this paper is directed to individuals concerned with emissions from combustion of waste crankcase oil for space heating. Studies were performed to characterize gaseous and particulate emissions and vaporizing pot solid residues resulting from the combustion of waste crankcase oil. Two types of waste oil burners were tested. One was a vaporizing oil burner rated at 35.2 kW (120,000 Btu/h heat input), and the other was an air atomizing oil burner rated at 73.3 kW (250,000 Btu/h heat input). Except for NO_X and SO_X, gaseous emissions were similar to those from conventional distillate oil combustion. NO_X and SO_X emissions were higher due to higher fuel nitrogen and sulfur concentrations. Waste oil from automotive use showed higher inorganic levels than crankcase oil used for truck engine lubrication. Both burner types discharged high levels of metallic species, but the air atomizing unit had much higher stack emission levels than did the vaporizing pot system. Also, particulate loading levels were an order of magnitude higher for the air atomizing burner than for the vaporizing pot burner when firing the waste oils. However, the vaporizing pot burner generated a waste residue containing the majority of its elemental emissions. Elements which exceeded threshold limit values for one or both heaters were cadmium, chromium, cobalt, copper, iron, lead, nickel, phosphorus, and zinc. However, the nickel and much of chromium appeared to be a sampling artifact caused by the stainless steel sampling system.     

Evaluation of Selected Gaseous Halocarbons for Use in source Test Performance Audits

A repository of 38 gaseous organic compounds in compressed gas cylinders has been established by EPA. This repository was established to provide standards for source test performance audits, that is, quantitative quality assurance tests. Among these compounds are ten halogenated organic species, which are the focus of this paper.

Stability studies of all ten compounds have been performed to determine the feasibility of using them as performance audit standards. Results indicate that all of the halocarbons tested are adequately stable to be used as reliable audit standards.

Subsequent to completion of stability studies, four of the ten halocarbons were used in source test performance audits. Results are available at this time for two of the four compounds; the results show agreement within 10% of the concentrations previously established by Research Triangle Institute.