Cap and trade schemes on waste management: A case study of the Landfill Allowance Trading Scheme (LATS) in England

The Landfill Allowance Trading Scheme (LATS) is one of the main instruments used in England to enforce the landfill diversion targets established in the Directive 1999/31/EC of the European Parliament and of the Council of 26 April 1999 on the landfill of waste (Landfill Directive). Through the LATS, biodegradable municipal waste (BMW) allowances for landfilling are allocated to each local authority, otherwise known as waste disposal authorities (WDAs). The quantity of landfill allowances received is expected to decrease continuously from 2005/06 to 2019/20 so as to meet the objectives of the Landfill Directive. To achieve their commitments, WDAs can exchange, buy, sell or transfer allowances among each other, or may re-profile their own allocation through banking and/or borrowing. Despite the goals for the first seven years – which included two target years (2005/06 and 2009/10) – being widely achieved (the average allocation of allowances per WDA was 22.9% higher than those finally used), market activity among WDAs was high and prices were not very stable. Results in terms of waste reduction and recycling levels have been satisfactory. The reduction of BMW landfilled (in percentage) was higher during the first seven years of the LATS period (2005/06–2011/12) (around 7% annually) than during the previous period (2001/02–2004/05) (4.2% annually). Since 2008, the significance of the LATS diminished because of an increase in the rate of the UK Landfill Tax. The LATS was suppressed after the 2012/13 target year, before what it was initially scheduled. The purpose of this paper is to describe the particularities of the LATS, analyse its performance as a waste management policy, make a comparison with the Landfill Tax, discuss its main features as regards efficiency, effectiveness and the application of the “polluter pays” principle and finally discuss if the effect of the increase in the Landfill Tax is what made the LATS ultimately unnecessary.     

Baseline levels of bioaerosols and volatile organic compounds around a municipal waste incinerator prior to the construction of a mechanical-biological treatment plant

New waste management programs are currently aimed at developing alternative treatment technologies such as mechanical–biological treatment (MBT) and composting plants. However, there is still a high uncertainty concerning the chemical and microbiological risks for human health, not only for workers of these facilities, but also for the population living in the neighborhood. A new MBT plant is planned to be constructed adjacently to a municipal solid waste incinerator (MSWI) in Tarragona (Catalonia, Spain). In order to evaluate its potential impact and to differentiate the impacts of MSWI from those of the MBT when the latter is operative, a pre-operational survey was initiated by determining the concentrations of 20 volatile organic compounds (VOCs) and bioaerosols (total bacteria, Gram-negative bacteria, fungi and Aspergillus fumigatus) in airborne samples around the MSWI. The results indicated that the current concentrations of bioaerosols (ranges: 382–3882, 18–790, 44–926, and <1–7 CFU/m³ for fungi at 25 °C, fungi at 37 °C, total bacteria, and Gram-negative bacteria, respectively) and VOCs (ranging from 0.9 to 121.2 μg/m³) are very low in comparison to reported levels in indoor and outdoor air in composting and MBT plants, as well in urban and industrial zones. With the exception of total bacteria, no correlations were observed between the environmental concentrations of biological agents and the direction/distance from the facility. However, total bacteria presented significantly higher levels downwind. Moreover, a non-significant increase of VOCs was detected in sites closer to the incinerator, which means that the MSWI could have a very minor impact on the surrounding environment.     

Changing Ecosystem Service Values Following Technological Change

Research on ecosystem services has focused mostly on natural areas or remote places, with less attention given to urban ecosystem services and their relationship with technological change. However, recent work by urban ecologists and urban designers has more closely examined and appreciated the opportunities associated with integrating natural and built infrastructures. Nevertheless, a perception remains in the literature on ecosystem services that technology may easily and irreversibly substitute for services previously obtained from ecosystems, especially when the superiority of the engineered system motivated replacement in the first place. We emphasize that the expected tradeoff between natural and manufactured capital is false. Rather, as argued in other contexts, the adoption of new technologies is complementary to ecosystem management. The complementarity of ecosystem services and technology is illustrated with a case study in Barcelona, Spain where the installation of sophisticated water treatment technology increased the value of the ecosystem services found there. Interestingly, the complementarity between natural and built infrastructures may remain even for the very ecosystems that are affected by the technological change. This finding suggests that we can expect the value of ecosystem services to co-evolve with new technologies. Technological innovation can generate new opportunities to harness value from ecosystems, and the engineered structures found in cities may generate more reliance on ecosystem processes, not less.     

Introduction of the Factor of Partitioning in the Lithogenic Enrichment Factors of Trace Element Bioaccumulation in Plant Tissues

Bioindicators are widely used in the study of trace elements inputs into the environment and great efforts have been conducted to separate atmospheric from soil borne inputs on biomass accumulation. Many monitoring studies of trace element pollution take into account the dust particles located in the plant surface plus the contents of the plant tissues. However, it is usually only the trace element content in the plant tissues that is relevant on plant health. Enrichment factor equations take into account the trace element enrichment of biomasses with respect soil or bedrocks by comparing the ratios of the trace element in question to a lithogenic element, usually Al. However, the enrichment equations currently in use are inadequate because they do not take into account the fact that Al (or whichever reference element) and the element in question may have different solubility-absorption-retention levels depending on the rock and soil types involved. This constrain will become critical when results from different sites are compared and so in this article we propose that the solubility factors of each element are taken into account in order to overcome this constrain. We analysed Sb, Co, Ni, Cr, Pb, Cd, Mn, V, Zn, Cu, As, Hg, and Al concentration in different zones of Catalonia (NE Spain) using the evergreen oak Quercus ilex and the moss Hypnum cupressiforme as target species. We compared the results obtained in rural and non industrial areas with those from the Barcelona Metropolitan Area. We observed differences in Al concentrations of soils and bedrocks at each different site, together with the differences in solubility between Al and the element in question, and a weak correlation between total soil content and water extract content through different sites for most trace elements. All these findings show the unsuitability of the current enrichment factors for calculating lithospheric and atmospheric contributions to trace element concentrations in biomass tissues. The trace element enrichment factors were calculated by subtracting the part predicted by substrate composition (deduced from water extracts from soils and bedrock) from total concentrations. Results showed that for most of the trace elements analysed, trace elements enrichment factors were higher inside the Barcelona Metropolitan Area than outside, a finding that indicates that greater atmospheric inputs occur in urban areas. The results show that the most useful and correct way of establishing a reference for lithospheric and atmospheric inputs into the plant tissues is, first, to analyse samples of the same plant species collected from a number of sites possessing similar environmental conditions (climate, vegetation type, soil type) and, second, to use this new enrichment factor obtained by subtracting from the total concentration in plant tissue the predicted contribution of soil or bedrock extracts instead of that of total soil or bedrock concentrations.     

Monitoring of (bio)available labile metal fraction in a drinking water treatment plant by diffusive gradients in thin films

A performance study of diffusive gradients in thin films (DGT) and inductively coupled plasma optical emission spectrometry (ICP-OES) was applied for the monitoring of the labile fraction of metals Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn, in Sant Joan Despí Drinking Water Treatment Plant located in the South of Barcelona’s Metropolitan Area (Spain). The DWTP monitoring protocol was optimized by working for 1 day of deployment (24 h) with the DGT device in contact with both treated and river water matrixes. Additionally, it was demonstrated that an increase in the deployment time of 1 week did not decrease the evaluated concentrations of the studied metals. The quality parameters of the DGT device and ICP-OES determination, such as limit of quantification, accuracy expressed as relative error (%) and reproducibility expressed as relative standard deviation, were evaluated. Good results were obtained for all the metals in ultrapure water; limits of quantification ranged from 1.5 μg L^− 1 for cadmium to 28 μg L^− 1 for zinc when deployment time of 24 h was used and from 0.2 μg L^− 1 for cadmium to 4 μg L^− 1 for zinc when this time was increased by 1 week. Accuracy and precisions lower than or equal to 10% were obtained at a parametric concentration value of the metals regulated in the European Drinking Water Guidelines (98/83/EC). DGT deployment was tested in river and treated water, and good results were obtained for Cd, Ni, Co and Zn, whereas for the other metals, a continuous control of their metallic labile fractions was monitored. Therefore, DGT device allows the continuous monitoring of the labile metal species in a drinking water treatment plant.     

Decontamination trends in the aquacultured fish gilthead seabream (Sparus aurata) after feeding long-term a PCDD/F spiked feed

Aquacultured fish gilthead seabream (Sparusaurata), previously exposed to low levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) trough the diet for a 13 months period, were fed on a clean feed for another 22 months. Gilthead seabream is a protandrous hermaphrodite species and this “decontamination” period coincided with the stages of sex differentiation, maturity and reproduction of the fish. PCDD/F levels in the fish tissues (i.e. muscle, liver, perivisceral fat and gonads), expressed in pg WHO-TEQ g⁻¹ fresh weight, showed a general decreasing trend during the “decontamination” period. However, this general trend varied among tissues and was also dependent on sex and lipid contents. Toxicological effects affecting fish behaviour and hepatic marker responses were also evaluated. The results pointed out that exposure to PCDD/Fs did not have an impact on fish development and reproduction, since the proportion of sexes found after the sex reversal process was within the normal range described for this species. In addition, long-term exposure to low PCDD/F levels did not significantly affect the response of most of the biochemical markers considered. On the contrary, some of them (e.g. EROD activity) showed variations in their responses during the sex differentiation process and onwards. Finally, the hepatic AhR mRNA levels increased during dioxin exposure but they returned to values typical for non-exposed fish after the “decontamination” period.     

Differential accumulation of mercury and other trace metals in the food web components of a reservoir impacted by a chlor-alkali plant (Flix, Ebro River, Spain): Implications for biomonitoring

Comparative studies of biomonitors of trace metal contamination are relatively scarce. We took advantage of a point source pollution in a reservoir (Flix, Spain) to compare trace metal (Hg, Pb, Cd, Se, As, Zn, Cu, Cr) bioaccumulation patterns among 16 food web components. Our results indicate that most organisms are suitable for Hg biomonitoring, whereas other metals are better monitored by only some of them. Biofilms and zebra mussel were the organisms with larger and more diverse biomonitoring capacity. However, we show that using groups of biomonitors increase the scope and strengths of the conclusions and specific goals can be better addressed. We conclude providing an overview of the strengths and weaknesses of the main organisms considered for biomonitoring trace metals in rivers and reservoirs.     

Population characteristics of young African women influencing prenatal exposure to DDT (Manhiça, Mozambique)

The concentrations of dichlorodiphenyltrichloroethane (DDT) compounds in cord blood of 214 children born between 2003 and 2006 in Manhiça (Mozambique) have been determined. In this time interval, corresponding to the period before DDT reintroduction for indoor residual spraying, the observed values averaged 0.8 and 0.4 ng/ml for 4,4′-dichlorodiphenyldichloroethylene (4,4′-DDE) and 4,4′-DDT, respectively, and were similar to those found in western countries. However, the 4,4′-DDT/4,4′-DDE ratio was high indicating that the inputs of these compounds arriving to children in utero originated from recent uses of the insecticide. The strongest factor affecting DDT concentration was parity. A well-defined decreasing concentration trend was observed for the cord blood concentrations in the period of study. The trend was also observed for multiparae and primiparae mothers independently. Children from multiparae women showed much lower concentrations than primiparae women. Children from mothers with secondary school level exhibited lower concentrations of these pesticides than mothers with lower degree of education.     

Microbial and physicochemical parameters associated with Legionella contamination in hot water recirculation systems

Hot water recirculation systems (HWRS) in hotels and nursing homes, which are common in countries such as Spain, have been related to outbreaks of legionellosis. To establish the relationships of microbial and physicochemical parameters, especially protozoa, with the occurrence of Legionella in HWRS, 231 samples from hotels and nursing homes were analysed for Legionella, protozoa, heterotrophic plate counts (HPC) at 22 and 37 °C, Pseudomonas, metals, temperature and others. Legionella pneumophila was the dominant species isolated, and 22 % were sg. 1. The sampling method became particularly important in order to define which factors were involved on the occurrence of Legionella. Results showed that the bacteria and the accompanying microbiota were more abundant in the first flush water whose temperature was lower. The bacteria occurred in those samples with high HPC and were inversely correlated with high temperatures. Multivariate regression showed that a concentration above 1?×?10⁵?CFU/100 mL of HPC at 37 °C, Fe above 0.095 ppm and the presence of protozoa increased significantly the risk of Legionella colonization, while univariant regression showed that the presence of Cu above 0.76 ppm and temperature above 55 °C diminished it. Therefore, to reduce the risk associated with Legionella occurrence in HWRS these parameters should be taken into consideration.     

Sources and Concentrations of Indoor Nitrogen Dioxide in Barcelona,Spain

Abstract

Sources and concentrations of indoor nitrogen dioxide (NO₂) were examined in Barcelona, Spain, during 1996– 1999. A total of 340 dwellings of infants participating in a hospital-based cohort study were selected from different areas of the city. Passive filter badges were used for indoor NO₂ measurement over 7–30 days. Dwelling inhabitants completed a questionnaire on housing characteristics and smoking habits. Data on outdoor NO₂ concentrations were available for the entire period of the study in the areas of the city where indoor concentrations were determined. Bivariate analysis was performed to investigate relationships between indoor NO₂ concentrations on one hand and outdoor NO₂ concentrations, housing, and occupant characteristics on the other. Stepwise multiple linear regression was performed with variables that were 1996 and 27.02 ppb in 1999, with the highest yearly value of 27.82 ppb in 1997. In the same time period, mean outdoor NO₂ concentration ranged between 25.26 and 25.78 ppb with a peak of 30.5 ppb in 1998. Multiple regression analysis showed that principal sources of indoor NO₂ concentrations were the use of a gas cooker, the absence of an extractor fan when cooking, and cigarette smoking. The absence of central heating was also associated with higher NO₂ concentrations. Finally, each ppb increase in outdoor NO₂ was associated with a 1% increase in indoor concentrations.