Vapour pressures, aqueous solubility, Henry's law constants and air/water partition coefficients of 1,8-dichlorooctane and 1,8-dibromooctane

New data on the vapour pressures and aqueous solubility of 1,8-dichlorooctane and 1,8-dibromooctane are reported as a function of temperature between 20 °C and 80 °C and 1 °C and 40 °C, respectively. For the vapour pressures, a static method was used during the measurements which have an estimated uncertainty between 3% and 5%. The aqueous solubilities were determined using a dynamic saturation column method and the values are accurate to within ±10%. 1,8-Dichlorooctane is more volatile than 1,8-dibromooctane in the temperature range covered (p_sat varies from 3 to 250 Pa and from 0.53 to 62 Pa, respectively) and is also approximately three times more soluble in water (mole fraction solubilities at 25 °C of 5.95 × 10⁻⁷ and 1.92 × 10⁻⁷, respectively). A combination of the two sets of data allowed the calculation of the Henry’s law constants and the air water partition coefficients. A simple group contribution concept was used to rationalize the data obtained.     

Modeling lead bioavailability and bioaccumulation by Lumbriculus variegatus using artificial particles. Potential use in chemical remediation processes

Artificial particles, specifically a diverse selection of chromatographical resins, have been recommended and used as a useful experimental model to predict the bioavailability and bioaccumulation of sediment-bound organic chemicals. In this work the same experimental model was adopted to investigate the bioavailability and bioaccumulation of lead by the freshwater oligochaete Lumbriculus variegatus. Particle-water partition coefficients were also determined. Sand particles and the anionic exchange resin promoted a similar uptake and bioaccumulation of lead. Instead, in the presence of the cationic exchanger the metal was not detected in the animals. For neutral particles, the uptake and accumulation depended on the chemistry of the functional groups at the active sites. In addition, a significant negative correlation was found between bioaccumulation and the particle-water partition coefficients. These studies may help to develop alternative methods for chemical remediation of lead-contaminated aquatic systems.     

Statistical evaluation of chronic toxicity data on aquatic organisms for the hazard identification: the chemicals toxicity distribution approach

Presently, in the Globally Harmonised System of Classification and Labelling of Chemicals the classification of substances for long-term effects to aquatic life is based on acute toxicity in combination with degradation and/or bioaccumulation potential. Recently an OECD Working Group was created to develop the classification scheme to accommodate chronic toxicity data related to aquatic organisms for assigning a chronic hazard category. This study focuses on a new approach for setting chronic toxicity cut-off values based on Chemicals Toxicity Distributions (CTDs). A CTD is obtained through statistical fitting of the data used by regulatory bodies for setting hazard-based classifications. The CTDs were made using the lowest aquatic NOEC value of each chemical. A review of different toxicological sources reporting acute aquatic toxicities was carried out. Initially, the data were arranged according to the specific source and distributions for key taxonomic groups (i.e. fishes, crustaceans and algae) were evaluated separately. In most cases, no significant departures from normality were observed. Thereafter, a compiled database containing >900 values was developed and the CTDs were constructed for each taxonomic group. Significant deviation from normality (P < 0.05) was observed in the fishes and crustaceans' CTDs. However, this deviation was apparently produced by the presence of only seven values with NOECs <1 x 10(-5) mg l(-1), while high correlation between the data and the normal scores (r-values>or= 0.989) indicated that the data were samples from normal distributions. From these observations, potential cut-off values would allow quantitative estimations of the percentage of chemicals falling into each specific category. This approach results in a simple classification hazard scheme where most chemicals are covered in one of the categories, allowing a clear distribution of the chemicals among three categories for chronic toxicity.     

Effects of medium-pressure UV lamps radiation on water quality in a chlorinated indoor swimming pool

The aim of our study was to determine the impact of medium-pressure UV lamps radiation on water quality in a chlorinated indoor swimming pool. An indoor swimming pool was equipped with two medium-pressure UV lamps. We collected eight samples of water daily over a four-weeks period and measured total and free chlorine, pH, water temperature, bacteriological parameters, total organic carbon and trihalomethanes. During the first week, which served as control, medium-pressure UV lamps were turned off. During the next three weeks, medium-pressure UV lamps were kept on 24 h per day. The third week, we reduced the level of the injected chlorine into water, and the last week we also reduced the water renewal volume by 27%. Our results showed that bacteriological parameters remained within allowable french limits. When medium-pressure UV lamps were kept on, total, free and active chlorine levels were significantly increased (P<0.001), whereas combined chlorine level were significantly decreased (P<0.001 and P<0.05, respectively). The levels of chloroform and bromodichloromethane were significantly increased when medium-pressure UV lamps were kept on (P<0.001), whereas chlorodibromomethane and bromoform levels significantly decreased (P<0.05 and P<0.001, respectively). The additional formation of chloroform and bromodichloromethane may be explained by the increase in active chlorine and by radicalizing mechanisms initiated by UV radiation.     

Enantiomeric fractions and congener specific determination of polychlorinated biphenyls in eggs of predatory birds from Doñana National Park (Spain)

The content of 30 polychlorinated biphenyls (PCBs) and the enantiomeric fractions of 10 chiral PCBs were determined in 17 infertile eggs from three different predatory bird species collected in Do?ana National Park (DNP, Spain) in the period 1999-2000. The highest PCB concentration was found in eggs from red kites (0.52-110 microg/g on a fresh weight basis, f.w.) followed by buzzard (0.08-13 microg/g f.w.) and booted eagle (0.10-1.5 microg/g f.w.). Seventy-five percent of the red kite eggs had PCB levels above 4.7 microg/g f.w., which is associated in the literature with reproductive failure. This could be related to the fact that red kite populations have decreased by more than 50% in the last five years in DNP. PCBs # 138, 153, and 180 were the most abundant in all cases. This is the first time that atropisomers of 10 chiral PCBs (PCBs # 45, 84, 91, 95, 132, 135, 136, 149, 174, and 176) in predatory bird eggs have been performed. The enantiomeric fractions (EFs) for most PCBs investigated were non-racemic (EF not = 0.5), ranging from 0.05 to 0.95. The results suggested that predatory birds, mainly red kite species, are highly polluted by PCBs, and PCBs # 95, 132, 135, 136, and 174 strongly deviate from the racemic-mixture values.     

Breakdown products on metabolic pathway of degradation of benz[a]anthracene by a ligninolytic fungus

Cultures of the ligninolytic fungus Irpex lacteus incubated in a nutrient liquid medium degraded more than 70% of the initially applied benz[a]anthracene within 14 days. At the first step of metabolization, benz[a]anthracene was transformed via a typical pathway of ligninolytic fungi to benz[a]anthracene-7,12-dione (BaAQ). The product was further transformed by at least two ways, whereas one is complied with the anthracene metabolic pathway of I. lacteus. Benz[a]anthracene-7,12-dione was degraded to 1,2-naphthalenedicarboxylic acid and phthalic acid that was followed with production of 2-hydroxymethyl benzoic acid or monomethyl and dimethylesters of phthalic acid. Another degradation product of BaAQ was identified as 1-tetralone. Its transformation via 1,4-naphthalenedione, 1,4-naphthalenediol and 1,2,3,4-tetrahydro-1-hydroxynaphthalene resulted again in phthalic acid. None of the intermediates were identified as dead-end metabolites. Metabolites produced by ring cleavage of benz[a]anthracene using the ligninolytic fungus are firstly presented in this work.     

Cadmium and zinc bioaccumulation and metallothionein response in two freshwater bivalves (Corbicula fluminea and Dreissena polymorpha) transplanted along a polymetallic gradient

This study was designed to compare the metallothionein (MT) response capacity of two freshwater bivalves, Corbicula fluminea and Dreissena polymorpha, along an environmental gradient of polymetallic pollution. The bivalves were transplanted into 4 stations in southwestern France, with a cadmium and zinc pollution gradient. MT and metal concentrations were measured in the soft bodies of the clams and mussels over 2.5 months. In the zebra mussels, variations in MT concentrations were strictly correlated to progressive Cd and Zn bioaccumulation. In contrast, the faster response in the clams appeared positively correlated to Cd accumulation only, with the activation of efficient detoxification mechanisms which limited Cd bioaccumulation and reduced Zn concentrations over time. Nevertheless, despite stronger metal accumulation factors in D. polymorpha, C. fluminea revealed higher sensitivity of MT response along the pollution gradient.     

In situ and laboratory bioassays using Poecilia reticulata Peters, 1859 in the biomonitoring of an acidic lake at Camaçari, BA, Brazil

The suitability and viability of acute in situ bioassays were investigated in the biomonitoring program of an acidic lake contaminated with sulphur residues. Responses of organisms observed in laboratory and in situ bioassays were also assessed to determine whether or not they were similar and comparable, regarding accuracy and precision. Newborn Poecilia reticulata were employed as test organisms and exposed to the same water samples under in situ and laboratory conditions. Mortality/immobility was the endpoint assessed and dead/immobile organisms were counted at various time intervals during exposure. The mean calculated LT50 values and 95% confidence intervals were 1.61 (1.36-1.87) h in the laboratory bioassays and 0.72 (0.55-0.89) h in the in situ bioassays. Statistical comparison of these values revealed a significant difference (p<0.05). In situ bioassays were more accurate than those carried out in the laboratory, demonstrating higher sensitivity and better reproduction of what occurs in nature, while laboratory bioassays were more precise.     

Effect of 2,4-D contamination on soil functional stability evaluated using the relative soil stability index (RSSI)

Soil functional stability is the capacity of soil functions to resist and recover from an environmental perturbation and can be used to evaluate soil health. It can be influenced by the presence of xenobiotics such as herbicides. The impact of a fresh 2,4-D contamination (36 mg kg(-1) dry soil) on soil functional stability was evaluated by comparing the capacity of soil enzyme activities to resist and recover from a heat perturbation for both a clean and 2,4-D-contaminated soil. The functional stabilities of the soils (uniform sands, pH 6.9, 7% (w/w) organic matter) were calculated using the relative soil stability index (RSSI). The RSSI scores indicate the proportion of potential enzyme activity the soil retains after a perturbation compared to the potential activity of an unperturbed soil. Six extra-cellular enzyme activities (acid and alkaline phosphatases, arylsulfatase, urease, protease and beta-glucosidase) were monitored in soil microcosms during a 15-day period. During this period, a 60 degrees C heat perturbation was applied to the soil for 24 h. The activities of arylsulfatase and protease were found to be the most stable following heat perturbation obtaining the highest RSSI scores (87% and 77%, respectively). Urease activity showed the lowest RSSI score (38%). Although all enzyme activities were inhibited by the presence of 2,4-D, the RSSI results indicated that contamination lowered the stability of only three enzyme activities (arylsulfatase, beta-glucosidase and urease). The RSSI adequately described resistance, recovery and recovery rate parameters and enabled differentiation between functional stabilities of clean and contaminated soil and between different soil types.     

Geochemical variations in aeolian mineral particles from the Sahara-Sahel Dust Corridor

The Sahara-Sahel Dust Corridor runs from Chad to Mauritania and expels huge amounts of mineral aerosols into the Atlantic Ocean. Data on samples collected from Algeria, Chad, Niger, and Western Sahara illustrate how corridor dust mineralogy and chemistry relate to geological source and weathering/transport history. Dusts sourced directly from igneous and metamorphic massifs are geochemically immature, retaining soluble cations (e.g., K, Na, Rb, Sr) and accessory minerals containing HFSE (e.g., Zr, Hf, U, Th) and REE. In contrast, silicate dust chemistry in desert basins (e.g., Bodélé Depression) is influenced by a longer history of transport, physical winnowing (e.g., loss of Zr, Hf, Th), chemical leaching (e.g., loss of Na, K, Rb), and mixing with intrabasinal materials such as diatoms and evaporitic salts. Mineral aerosols blown along the corridor by the winter Harmattan winds mix these basinal and basement materials. Dusts blown into the corridor from sub-Saharan Africa during the summer monsoon source from deeply chemically weathered terrains and are therefore likely to be more kaolinitic and stripped of mobile elements (e.g., Na, K, Mg, Ca, LILE), but retain immobile and resistant elements (e.g., Zr, Hf, REE). Finally, dusts blown southwestwards into the corridor from along the Atlantic Coastal Basin will be enriched in carbonate from Mesozoic-Cenozoic marine limestones, depleted in Th, Nb, and Ta, and locally contaminated by uranium-bearing phosphate deposits.