Monitoring of sources and atmospheric processes controlling air quality in an urban Mediterranean environment

Different monitoring parameters (PM mass concentrations, number–size distribution, black carbon, gaseous pollutants, and chemical composition, among others) are currently used in air quality studies. Urban aerosols are the result of several sources and atmospheric processes, which suggests that a single monitoring technique is insufficient to quantitatively evaluate all of them.This study assesses the suitability of a number of monitoring techniques (PM mass concentrations, number and size distribution of ultra-fine particles, levels of gaseous pollutants, and a complete chemical characterization of PM₁₀ and PM_2.5) by examining the response of those techniques to the different emission sources and/or atmospheric processes affecting an urban Mediterranean area (Barcelona, NE Spain).The results of this work reveal that the PM mass, the number concentration and the chemical composition give different, but complementary, information. Whereas the mineral matter, a key atmospheric aerosol component across the Mediterranean, is not properly quantitatively assessed by measuring sub-micrometric particles, the monitoring of the number concentration is indispensable to interpret the origin of specific aerosol episodes. Furthermore, the chemical composition yields very relevant information to deduce the causes of specific pollution episodes.The number concentration of ultra-fine particles in urban areas is strongly dependent upon vehicle exhaust emissions, which may cause adverse health impacts. Moreover, urban Mediterranean environments are favourable to produce nucleation-mode particles (<20 nm) with photochemical origin. In those cases, these particles are expected to be of high solubility and consequently their toxicity may differ from that of traffic-generated ultra-fine particles. Thus, the use of a single monitoring parameter to evaluate the health effects seems to be not enough.     

Monitoring of firefighters exposure to smoke during fire experiments in Portugal

Forest fires represent a serious threat to public security in Europe due to the large burned area. Moreover, smoke pollution due to forest fire events is an important public health issue for the communities directly affected, and particularly for the personnel involved in firefighting operations. Aiming to contribute to the scientific knowledge concerning firefighters exposure to forest fires smoke, data of individual exposure to carbon monoxide, nitrogen dioxide, volatile organic compounds, and particulate matter were obtained during experimental field fires for a group of 10 firefighters equipped with portable “in continuum” measuring devices. Measured values are very high exceeding the Occupational Exposure Standard limits, in particular for peak limit thresholds. These are the first measurements and analysis of firefighter's individual exposure to toxic gases and particles in fire smoke experiments in Europe. However, they already indicate that urgent measures to avoid these levels of exposure are needed.     

Multilingual education of students on a global scale and perspective—international networking on the example of bioindication and biomonitoring (B&B technologies)

Living or formerly living organisms are being used to obtain information on the quality of the general health status of our environment by bioindication and biomonitoring methods for many decades. Thus, different roads toward this common scientific goal were developed by a lot of different international research groups. Global cooperation in between various scientific teams throughout the world has produced common ideas, scientific definitions, and highly innovative results of this extremely attractive working field. The transdisciplinary approach of different and multifaceted scientific areas—starting from biology, analytical chemistry, via health physics, up to social and economic issues—have surpassed mental barriers of individual scientists, so that “production” of straightforward common results related to the influence of material and immaterial environmental factors to the well-being of organisms and human life has now reached the forefront of international thinking. For the further sustainable development of our common scientific “hobby” of bioindication and biomonitoring, highest personal energy has to be given by us, being teachers to our students and to convince strategically decision makers as politicians to invest (financially) into the development of education and research of this innovative technique. Young people have to be intensively convinced on the “meaning” of our scientific doing, e.g., by extended forms of education. One example of multilingual education of students on a global scale and perspective is given here, which we started about 3 years ago.     

Atmospheric Monitoring at Abandoned Mercury Mine Sites in Asturias (NW Spain)

Mercury concentrations are usually significant in historic Hg mining districts all over the world, so the atmospheric environment is potentially affected. In Asturias, northern Spain, past mining operations have left a legacy of ruins and Hg-rich wastes, soils and sediments in abandoned sites. Total Hg concentrations in the ambient air of these abandoned mine sites have been investigated to evaluate the impact of the Hg emissions. This paper presents the synthesis of current knowledge about atmospheric Hg contents in the area of the abandoned Hg mining and smelting works at ‘La Peña–El Terronal’ and La Soterraña, located in Mieres and Pola de Lena districts, respectively, both within the Caudal River basin. It was found that average atmospheric Hg concentrations are higher than the background level in the area (0.1 μg Nm^?3), reaching up to 203.7 μg Nm^?3 at 0.2 m above the ground level, close to the old smelting chimney at El Terronal mine site. Data suggest that past Hg mining activities have big influences on the increased Hg concentrations around abandoned sites and that atmospheric transfer is a major pathway for Hg cycling in these environments.     

Exploring the relationship between nitrogen dioxide and ground-level ozone by applying the joint multifractal analysis

The main goal of this study is to determine the present heavy metal pollution state in the two gulfs of the Aegean Sea; Saros and Gökova Gulfs. The surface sediments were collected from 11 and eight locations in the Saros and Gökova during May 2001, respectively. The results showed that the sediments of Saros and Gökova gulfs were polluted with Pb, Cr, Zn, Mn, and Ni and Pb, Cr, Ni, and Mn, respectively. For various metals the contamination factor (CF) has been calculated to assess the degree of pollution in sediments. The sediments were noted to be not contaminated with Hg, Cd, and Cu in all areas. Moderate contaminations were observed for Pb, Cr, and Zn in Saros Gulf. The CF was moderate and very high for Ni in the Saros and the Gökova Gulf, respectively.     

How to improve reliability in groundwater analysis: over a decade of experience with external quality control in field campaigns on volatile halogenated compounds

The reliability in measurement results obtained during environmental monitoring is crucial for the assessment and further planning of remediation efforts on the respective contaminated sites by the responsible authorities. A case study concerned with groundwater contaminated with perchloroethylene, trichloroethylene and 1,1,2-trichlorotrifluoroethane including their degradation products which involves private contract laboratories and an independent provider of quality assurance (QA) is presented. The experience gained with biannual monitoring campaigns over 14 years indicates that the selection of contractors on basis of accreditation status and successful performance in interlaboratory comparisons are not sufficient. Rather the auditing of the contractors by the QA provider prior to each campaign and the crosschecking of selected monitoring samples by the QA provider led to a lasting improvement of reliability in the contractors' measurement results. A mean deviation of 20% from the reference value determined by the QA provider for the crosschecked samples was reached.     

Source apportionment in oil spill remediation

A pipe rupture during unloading led to a spillage of 350-700 tonnes of Ca?o Limon, a light sweet crude oil, into San Vicente Bay in 2007. Initial clean-up methods removed the majority of the oil from the sandy beaches although some oil remained on the rocky shores. It was necessary for the responsible party to clean the spilled oil even though at this location there were already crude oil hydrocarbons from previous industrial activity. A biosolvent based on vegetable oil derivatives was used to solubilise the remaining oil and a statistical approach to source apportionment was used to determine the efficacy of the cleaning. Sediment and contaminated rock samples were taken prior to cleaning and again at the same locations two days after application of the biosolvent. The oil was extracted using a modified USEPA Method 3550B. The alkanes were quantified together with oil biomarkers on a GC-MS. The contribution that Ca?o Limon made to the total oil hydrocarbons was calculated from a Partial Least Squares (PLS) analysis using Ca?o Limon crude oil as the source. By the time the biosolvent was applied, there had already been some attenuation of the oil with all alkanes 相似文献   

Heavy metals concentrations in zooplankton and suspended particulate matter in a southwestern Atlantic temperate estuary (Argentina)

The present work includes part of the first studies of metals concentrations in the zooplankton from a heavily industrialized estuary of Argentina, the Bahía Blanca estuary. Cd, Cu, and Pb concentrations in the zooplankton (macro- and mesozooplankton) and the suspended particulate matter were measured at stations with different degree of pollution. Physicochemical variables and zooplankton composition and abundance were also analyzed. Thus, the aim of the present work was to analyze the spatial and temporal distribution of heavy metals in these two different fractions, and the possible relation among them due to their importance in the biogeochemical cycles of marine environments. Samplings were carried out during a year, from March 2005 to April 2006, every 2 months, at stations located near chemical and petrochemical industries, stations far from these points and one station in an intermediate location. In the mesozooplankton, the mean concentrations of Cd, Cu, and Pb were 3.63?±?1.46, 34.46?±?5.40, and 11.54?±?3.04 μg?g^?1 dry weight (d.w.) respectively, while in the macrozooplankton, 3.20?±?2.28, 21.86?±?4.79, and 8.36?±?1.85 μg?g^?1 d.w. On the other hand, particulate Cd, Cu, and Pb presented a mean concentration of 3.33?±?1.22, 12.75?±?2.67, and 12.53?±?3.20 μg?g^?1 d.w., respectively. Metals’ levels in both the SPM and zooplankton fluctuated throughout the study time and were relatively high in the particulate phase especially for Cu and Pb. Moreover, zooplankton accumulated important concentrations of the three metals. The sources of them are probably the discharges of the industries and domestic sewages located near the estuary.     

Lead isotope ratios in lichen samples evaluated by ICP-ToF-MS to assess possible atmospheric pollution sources in Havana,Cuba

Epiphytic lichens, collected from 119 sampling sites grown over “Roistonea Royal Palm” trees, were used to assess the spatial distribution pattern of lead (Pb) and identify possible pollution sources in Havana (Cuba). Lead concentrations in lichens and topsoils were determined by flame atomic absorption spectrophotometry and inductively coupled plasma (ICP) atomic emission spectrometry, respectively, while Pb in crude oils and gasoline samples were measured by ICP-time of flight mass spectrometry (ICP-ToF-MS). Lead isotopic ratios measurements for lichens, soils, and crude oils were obtained by ICP-ToF-MS. We found that enrichment factors (EF) reflected a moderate contamination for 71% of the samples (EF > 10). The ²⁰⁶Pb/²⁰⁷Pb ratio values for lichens ranged from 1.17 to 1.20 and were a mixture of natural radiogenic and industrial activities (e.g., crude oils and fire plants). The low concentration of Pb found in gasoline (<7.0 μg L^?1) confirms the official statement that leaded gasoline is no longer used in Cuba.     

Host-guest complexes of phenoxy alkyl acid herbicides and cyclodextrins. MCPA and β-cyclodextrin

The chlorophenoxy herbicide MCPA (4-chloro-2-methylphenoxyacetic acid), widely used for the control of broad-leaf weeds primarily in cereal and grass seed crops, still remains one of the most often used herbicides in Portugal. As the formation of inclusion complexes with cyclodextrins can improve its solubility properties, the interaction between the herbicide MCPA and β-cyclodextrin was investigated. The stability constants describing the extent of formation of the complexes have been determined by phase-solubility studies. Different analytical techniques [ultraviolet-visible spectroscopy (UV-Vis), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR)] were employed for a thorough investigation of the structural characteristics of the obtained complexes, which exhibited distinct features and properties from both “guest” and “host” molecules. FTIR and ¹H NMR data obtained for the MCPA/β-CD complexes gave information about the interaction between MCPA and the nonpolar cyclodextrin cavity. The dramatic change observed in band frequency and proton displacements of OCH₂ group and H6 aromatic proton confirmed the inclusion of MCPA in β-CD.

The formation of an inclusion complex between MCPA and β-CD increased the aqueous solubility of this herbicide which could be a particularly advantageous property for some specific applications, namely to improve commercial formulation and for environmental protection.