Dioxins and polychlorinated biphenyls (PCDD/Fs and PCBs) in food from farms close to foot and mouth disease animal pyres

To control the outbreak of foot and mouth disease, which occurred in the UK in early 2001, a large number of farm animals were slaughtered. Where it was not possible to render or landfill the carcasses, they were destroyed by burning on open pyres, with wood, coal and other materials. Uncontrolled combustion such as this is known to produce small quantities of dioxins and an investigation was made into whether, as a result of the burning, there was an elevation in the concentrations of these compounds in food produced in the areas close to the pyres. With few exceptions, concentrations of PCDD/Fs and PCBs were within the expected ranges as predicted by reference data. No accumulation over time was evident from a repeat milk sampling exercise. Where elevated concentrations of PCDD/Fs and PCBs were found in chickens and eggs, they were in samples not destined for the food chain. Elevated levels in some samples of milk from Dumfries and Galloway were not found in earlier or later samples and may have been found as a result of a temporary feeding regime. Elevated concentrations in lamb from Carmarthenshire were from very young animals which would not have entered the food chain. There was no evidence of any significant increase in dietary exposure to PCDD/Fs and PCBs as a result of the FMD pyres.     

Robust detection protocols for uncertain introductions of invasive species

Two important features of real-world port inspections of shipping containers for invasive species are the general absence of underlying economic considerations and the climate of severe uncertainty that surrounds the likelihood of invasive species introductions. In this article we propose and illustrate a method for determining inspection protocols that address both of these issues. We seek inspection protocols that are robust in the sense that they maximize the range of uncertainty over which the expected loss from the introduction of an invasive species plus the costs of inspections do not exceed some critical value. These inspection strategies are practical and provide ready alternatives to existing protocols.     

Development of Emission Factors for Polyamide Processing

ABSTRACT

Emission factors for selected volatile organic compounds (VOCs) and particulate material were developed during processing of commercial grades of polyamide 6, polyamide 66, and polyamide 66/6 resins. A small commercial-type extruder was used, and melt temperatures ranged from 475 to 550 °F. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere per million pounds of polymer resin processed. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar polyamide extrusion operations.     

Use of Membrane Collectors in Electrostatic Precipitators

ABSTRACT

Membrane collection surfaces, developed and patented by researchers at Ohio University, were used to replace steel plates in a dry electrostatic precipitator (ESP). Such replacement facilitates tension-based rapping, which shears the adhered particle layer from the collector surface more effectively than hammer-based rapping. Tests were performed to measure the collection efficiency of the membranes and to quantify the potential improvements of this novel cleaning technique with respect to re-entrainment. Results indicate that even semiconductor materials (e.g., carbon fibers) collect ash nearly as efficiently as steel plates, potentially indicating that collection surface resistivity is primarily dictated by the accumulated ash layer and not by the underlying plate conductivity. In addition, virtually all sheared particles separated from the collecting membranes fell within the boundary layer of the membrane, indicating extremely low potential for re-entrainment.     

A Method for Rapid Calculation of Merchant Vessel Combustion Emission

A simple method for calculating long term (1 year average) combustion emissions from cargo vessels is presented. The method uses emission factors for the five EPA criteria pollutants based on the amount and type of cargo carried by these vessels. Separate emission factors are derived for the underway and docking operations based on current fuel consumption to transport or load/unload cargo. Fuel consumption is then converted to emission factors in the form of tons of pollutant per million ton miles of cargo transported or tons of pollutant per million tons of cargo loaded/unloaded. The emission calculations can be performed on a desk calculator using data published in a federal document. The annual emissions of the Port of Houston are estimated as a sample calculation. The report also Includes a method of determining the spatial distributions of the emissions and a listing of stack parameters.     

Development of termites severity probability map of futa campus area using geographical information system (GIS) technology

Environment, Development and Sustainability - Siting of buildings in rural urban development requires that the prevalence of termite activities is considered. The severity of termite activities...     

Rotary drum soil blending for source zone remediation: Various application scenarios

Mechanical blending of contaminated soil with amendments has recently reemerged as an important treatment technology. From its original application using large‐diameter augers in the early 1990s to the current use of rotary drum blenders, soil blending is being used as an alternative to other remediation technologies like amendment injection and soil vapor and groundwater extraction. Shallow (approximately 10 m below ground surface [bgs] or less) soil blending also offers an alternative to excavation and disposal. Soil blending has been used to remediate a site with various contaminants including, but not limited to, chlorinated solvents, petroleum, and metals. The types of soils susceptible to soil blending vary from sands and gravels to silts and clays to fractured rock and combinations of all of these. The types of amendments blended include oxidants, reducing agents, biological enhancements, and stabilizing amendments. Soil blending systems deliver the power to the mixing head to adequately mix the soil and amendment to enhance remediation effectiveness. Since long‐term contamination is often a result of heterogeneously distributed residual contaminant in localized source zones that are difficult to access, the typical aim of soil blending is to homogenize the soil while effectively distributing amendment to these zones made accessible by blending. By effectively homogenizing the soil, however, soil blending will increase the void ratio and disrupt the shear strength and bearing capacity of the soil so an important component of a soil blending technology is proper recovery of these geotechnical parameters. This can be achieved by using well‐known soil improvement techniques such as amending all or a portion of the blended area with Portland cement or lime. Several case studies of soil blending treatments of different contaminants and amendments in various soil types are provided.     

Greenhouse gas emissions and poverty alleviation nexus in the Economic Commission of West African States

This paper investigates the nexus between greenhouse gas emissions and poverty alleviation in the Economic Commission of West African States between 1985 and 2020 applying autoregressive distributed lag and Granger causality techniques. The results reveal that carbon dioxide non-significantly relates to gross domestic product per capita positively while nitrous oxide and foreign direct investment impacts gross domestic product per capita positively. Methane negatively impacts gross domestic product per capita. The governments should use conventions to regulate greenhouse gas emissions’ effects on environmental degradation regionally and globally. The study underscores that countries should diversify to cleaner energy sources. This would reduce greenhouse gas emissions in the atmosphere. Massive technological investment is required to mitigate the greenhouse gas emissions’ negative impacts on the environment which create poverty. This policy implication ensures environmental sustainability and reverses the ugly trend of greenhouse gas emissions on poverty.     

Wind speed affects prey-catching behaviour in an orb web spider

Wind has previously been shown to influence the location and orientation of spider web sites and also the geometry and material composition of constructed orb webs. We now show that wind also influences components of prey-catching behaviour within the web. A small wind tunnel was used to generate different wind speeds. Araneus diadematus ran more slowly towards entangled Drosophila melanogaster in windy conditions, which took less time to escape the web. This indicates a lower capture probability and a diminished overall predation efficiency for spiders at higher wind speeds. We conclude that spiders’ behaviour of taking down their webs as wind speed increases may therefore not be a response only to possible web damage.