Determination of total content and isotopic compositions of plutonium and uranium in environmental samples for safeguards purposes by ICP-QMS

The aim of this work was to determine the concentrations and isotopic compositions of plutonium and uranium in environmental samples for safeguards purposes. An analytical method was developed with a plutonium and uranium separation procedure based on extraction chromatography (using 2 mL TEVA and UTEVA columns) and detection with a quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with a membrane desolvation system. Starting from blank swipes, the background equivalent concentration (BEC) was 8 fg for ²³⁹Pu and 1 ng ²³⁸U. The method was successfully applied to certified reference materials as well as to round robin samples obtained in the framework of the inter-laboratory exercise program, promoted by the Brazilian–Argentine Agency for Accounting and Control of Nuclear Materials (ABACC), together with the US Department of Energy (USDOE). After the introduction of an additional ion-exchange separation step, the methodology was applied to the IAEA-384 sediment reference sample with precise and accurate total plutonium and uranium, ²⁴⁰Pu/²³⁹Pu, ²⁴¹Pu/²³⁹Pu, ²³⁴U/²³⁸U and ²³⁵U/²³⁸U atomic ratio results.     

Increasing interannual and altitudinal ozone mixing ratios in the Catalan Pyrenees

Interannual, seasonal, daily and altitudinal patterns of tropospheric ozone mixing ratios, as well as ozone phytotoxicity and the relationship with NO_x precursors and meteorological variables were monitored in the Central Catalan Pyrenees (Meranges valley and Forest of Guils) over a period of 5 years (2004–2008). Biweekly measurements using Radiello passive samplers were taken along two altitudinal transects comprised of thirteen stations ranging from 1040 to 2300 m a.s.l. Visual symptoms of ozone damage in Bel-W3 tobacco cultivars were evaluated biweekly for the first three years (2004–2006). High ozone mixing ratios, always above forest and vegetation protection AOT40 thresholds, were monitored every year. In the last 14 years, the AOT40 (Apr–Sept.) has increased significantly by 1047 μg m^?3 h per year. Annual means of ozone mixing ratios ranged between 38 and 67 ppb_v (38 and 74 ppb_v during the warm period) at the highest site (2300 m) and increased at a rate of 5.1 ppb_v year^?1. The ozone mixing ratios were also on average 35–38% greater during the warm period and had a characteristic daily pattern with minimum values in the early morning, a rise during the morning and a decline overnight, that was less marked the higher the altitude. Whereas ozone mixing ratios increased significantly with altitude from 35 ppb_v at 1040 m–56 ppb_v at 2300 m (on average for 2004–2007 period), NO₂ mixing ratios decreased with altitude from 5.5 ppb_v at 1040 m–1 ppb_v at 2300 m. The analysis of meteorological variables and NO_x values suggests that the ozone mainly originated from urban areas and was transported to high-mountain sites, remaining aloft in absence of NO. Ozone damage rates increased with altitude in response to increasing O₃ mixing ratios and a possible increase in O₃ uptake due to more favorable microclimatic conditions found at higher altitude, which confirms Bel-W3 as a suitable biomonitor for ozone concentrations during summer time. Compared to the valley-bottom site the annual means of ozone mixing ratios are 37% larger in the higher sites. Thus the AOT40 for the forest and vegetation protection threshold is greatly exceeded at higher sites. This could have substantial effects on plant life at high altitudes in the Pyrenees.     

Analysis of dioxins and furans in environmental samples by GC-ion-trap MS/MS

The work aims to characterise PCDDs/Fs in environmental matrices by high resolution gas chromatography coupled to low resolution quadrupole ion-trap mass spectrometry (GC-QITMS/MS). In particular, the study was mainly focused in different environmental samples such as sewage sludge, soils, and sediments and in combustion residues as fly ashes. Previous experiences have already detected and quantified PCDDs/PCDFs in all matrices studied. Moreover, isomer-specific analysis of 2,3,7,8-PCDDs/Fs compounds corroborated good correlation between GC-QITMS/MS and a well-established technique such as high resolution mass spectrometry (HRMS). Finally, QC measures included the participation in intercalibration exercises. Successful results were achieved using GC-QITMS/MS in the analysis of fly ashes, soils and sediment materials. In general, GC-QITMS/MS constitutes an interesting alternative for routine analysis of dioxins in such as matrices.     

Site-Specific Characterization of Castromil Brownfield Area Related to Gold Mining Activities

Castromil is one of the gold mining areas in Portugal that has been abandoned since 1940. This area, which was first mined in Roman times, is located within a Hercynian granite body near the contact with Silurian metasediments. Gold is essentially disseminated along veins in the silicified granite, running NW-SE, related with a shear zone and frequently associated with sulphides (arsenopyrite and basically pyrite). In paragenetic terms, three stages of mineralization are considered: ferro-arseniferous (quartz + arsenopyrite I + pyrite I + pyrrhotite + bismuth), zinciferous (sphalerite + chalcopyrite), and remobilization (arsenopyrite II + galena + gold). Due to the lack of laws and environmental education, Castromil is today a gold mining heritage site where we can detect the consequences of an incautious exploration (tailings, wells and adits located in the old explored zone) and where a residential area is located. In order to characterize the actual state of the old mining area the trace metal contamination of soils and waters by mining activities was investigated. In the studied area 106 soil samples, 15 waters and 20 plants were sampled and analysed. The soil samples were analysed for 32 elements by ICP-AES. Waters were analysed by ionic chromatography and ICP-MS for major and trace elements. Plants were analysed for As, Fe and Pb by AAS. The results are discussed taking into account the risk-based standards for soils and groundwater's (target and intervention values) proposed by Swartjes (1999). The results show elevated concentration of As and Pb which were found in soils collected from agricultural areas. Foodstuff plants species collected in the Castromil agricultural area show high concentrations of As in the leaves (cabbage and lettuce) and in the tubers (potatoes). Groundwaters in the mining area contain high concentrations of As that exceeds the intervention values. The area must to be subject to a remediation process, considering the actual risks to humans and ecosystems and the risks due to contaminant migration.     

Hair mercury levels in an urban population from southern Italy: fish consumption as a determinant of exposure

Mercury levels in hair of a general population, 237 adults aged between 35-45, in Naples, Italy, were assessed. The subjects were asked to fill in a questionnaire about age, gender, body weight, height, body mass index (BMI), fish consumption, number, surface and area of dental amalgam fillings. Total mercury (THg) concentrations in human hair ranged from 0.221 to 3.402 microg/g and the mean value for the subjects under study was 0.638 microg/g. Study participants were divided into three groups in accordance with fish consumption and dental amalgam: ANF (amalgam and no fish); NAF (no amalgam but with fish) and AAF (amalgam and fish). Significant differences in THg were found in the three groups (p<0.05). A multiple linear regression analysis showed a weak but significant correlation of THg content in hair with respect to gender and age, but almost no association was found between THg and dental fillings. Conversely, a strong correlation was obtained between THg and fish consumption regardless of the group evaluated. Finally, mercury levels in hair exceeded the levels corresponding to the EPA reference dose (RfD) of 0.1 microg Hg/kg body weight per day (1 microg Hg/g hair) in 6% of the population (4% men and 2% women). However, the THg limits in our subjects were not exceeded according to the WHO guidelines, which use a benchmark dose of 0.23 microg Hg/kg bw/day (14 microg Hg/g maternal hair).     

Persistence of Hepatitis A Virus in Fresh Produce and Production Environments,and the Effect of Disinfection Procedures: A Review

Although information is limited, it is evident that prolonged persistence of infectious Hepatitis A virus (HAV) is a factor in the transmission of the virus via fresh produce. Consequently, data on persistence of the virus on produce, and in environments relevant to production, such as soils, water and surfaces, are required to fully understand the dynamics of transmission of HAV via foods. Furthermore, information on effective disinfection procedures is necessary to implement effective post-harvest control measures. This review summarises current information on HAV persistence in fresh produce and on relevant disinfection procedures. On vegetables, HAV can remain infectious for several days; on frozen berries, it can persist for several months. HAV can remain infectious on surfaces for months, depending on temperature and relative humidity, and can survive desiccation. It can survive for several hours on hands. Washing hands can remove the virus, but further data are required on the appropriate procedure. Chlorination is effective in water, but not when HAV is associated with foodstuffs. Bleach and other sodium hypochlorite disinfectants at high concentrations can reduce HAV on surfaces, but are not suitable for use on fresh produce. There is only limited information on the effects of heating regimes used in the food industry on HAV. HAV is resistant to mild pasteurisation. Some food components, e.g. fats and sugars, can increase the virus’ resistance to higher temperatures. HAV is completely eliminated by boiling. Quantitative prevalence data are needed to allow the setting of appropriate disinfection log reduction targets for fresh produce.     

EROD induction and PCDD/F levels in fish liver from the Biobio River in Chile

The Biobio River basin, located in central Chile, is one of the most important freshwater resources for a population of 1 million inhabitants. The river receives discharges of pulp mills, sewage treatment plants and there is a diffuse input of materials coming from the drainage basin. Previous studies reported high levels of etoxyresorufin-O-deethylase (EROD) induction in fish from the lower stretch of the river, mainly due to polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) exposure. The present study investigates polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzo-furans (PCDFs) levels as well as EROD induction in fish livers from Central Chile's Biobio River. Dioxin and furan levels in fish livers are reported for the first time in three areas of the Basin. In all samples the highest concentrations were found for the octachlorodibenzo-p-dioxin (OCDD) and PCDD/F TEQ concentrations ranged from 2.83 to 6.33 ppt (wet weight). The results indicate a clear induction of EROD activity in different fish species as the river mouth is approached, although this induction is not clearly related with dioxin and furan levels found in the fish livers. Our results clearly show that other pollutants might be acting as EROD inductors in the Biobio Basin.     

Drivers for OSH interventions in small and medium-sized enterprises

The debate concerning occupational safety and health (OSH) interventions has recently focused on the need of improving the evaluation of interventions, and in particular on the need for providing information about why the intervention worked or not, under what circumstances and in which context. Key concepts in the analysis of the context are the drivers, i.e., those factors enabling, fostering or facilitating OSH interventions. However, the concept of driver for an OSH intervention is both confused and contested. Although the term is widely used, there is little consensus on how drivers should be understood, how important they are in different contexts and how they can facilitate interventions. This exploratory study based on interviews with the owner-managers and the safety officers of small and medium-sized enterprises (SMEs) gives an overview of the most characteristic drivers for OSH interventions. The results will be used to make an initial evaluation of SMEs' needs, and will help orient interventions and future research.     

Community perspectives on managing health of peri-urban river system: evidence from the Hawkesbury-Nepean river catchment,Australia

In this study, we examine aspects of community values and perspectives on goods and services received from the river along with issues related to sustainable management of the river. The study reveals that the contemporary values placed on rivers by communities are mostly associated with recreational and leisure activities. The distance from the river and age of the participants appeared as the most influential social demographic factors affecting participants' perspectives on river health. The study indicates that people tend to develop a strong bond with the natural resources around them and the amount of time spent at a location is directly related to the strength of this relationship. To assess the general river condition and health, a number of visual indicators (e.g., floating debris) were suggested. If properly standardised and calibrated, such indicators have the potential to develop cost-effective monitoring tools for detecting seasonal and spatial changes in river health.     

Allocation of GHG emissions in combined heat and power systems: a new proposal for considering inefficiencies of the system

The paper industry is responsible for a considerable amount of greenhouse gas (GHG) emissions mainly due to its intensive energy requirements. The production of heat and power streams in a cogeneration system, i.e., a combined heat and power (CHP) plant, releases considerable amounts of GHG emissions into the atmosphere. Such emissions are already subjected to legislation globally. The amount of GHG emissions is usually calculated from the product of the total amount of energy activity multiplied by an emission factor. However, each energy output stream should get a share of emissions responsibility. This fact could assist in assigning weights to the emissions generated for power and thermal purposes in a combined heat and power plant. However, developing a suitable method of allocating emissions in a cogeneration system is still a concern and a subject research for scientists, companies and policy makers. This paper exposes and evaluates different published allocation methods and applies them to a real case of a combined heat and power plant integrated in a paper mill and proposes a new allocation method.