Proposal for an Integral Quality Index for Urban and Urbanized Beaches

A composite index, based on function analysis and including thirteen sub-indices, was developed to assess the overall quality of urban and urbanized beaches in the Mediterranean area. The aggregation of components and sub-indices was based on two questionnaires completed by beach users and experts. Applying the new Beach Quality Index (BQI) demonstrated that the quality of beaches could be improved. In general, the strongest aspects of the beaches assessed were those related to short-term user demand, and the weakest were those related to the consequences of human pressure on the area, in particular, erosion problems. The composite index is intended to be used together with Environmental Management Beach Systems (EMBs) as a hierarchical management scorecard and in monitoring programs. This new tool could also make planning more proactive by synthesizing the state of the most important beach processes.     

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation,model description and initial simulation

Motivated by the question of whether and how a state-of-the-art regional chemical transport model (CTM) can facilitate characterization of CO₂ spatiotemporal variability and verify CO₂ fossil-fuel emissions, we for the first time applied the Community Multiscale Air Quality (CMAQ) model to simulate CO₂. This paper presents methods, input data, and initial results for CO₂ simulation using CMAQ over the contiguous United States in October 2007. Modeling experiments have been performed to understand the roles of fossil-fuel emissions, biosphere–atmosphere exchange, and meteorology in regulating the spatial distribution of CO₂ near the surface over the contiguous United States. Three sets of net ecosystem exchange (NEE) fluxes were used as input to assess the impact of uncertainty of NEE on CO₂ concentrations simulated by CMAQ. Observational data from six tall tower sites across the country were used to evaluate model performance. In particular, at the Boulder Atmospheric Observatory (BAO), a tall tower site that receives urban emissions from Denver, CO, the CMAQ model using hourly varying, high-resolution CO₂ fossil-fuel emissions from the Vulcan inventory and CarbonTracker optimized NEE reproduced the observed diurnal profile of CO₂ reasonably well but with a low bias in the early morning. The spatial distribution of CO₂ was found to correlate with NOx, SO₂, and CO, because of their similar fossil-fuel emission sources and common transport processes. These initial results from CMAQ demonstrate the potential of using a regional CTM to help interpret CO₂ observations and understand CO₂ variability in space and time. The ability to simulate a full suite of air pollutants in CMAQ will also facilitate investigations of their use as tracers for CO₂ source attribution. This work serves as a proof of concept and the foundation for more comprehensive examinations of CO₂ spatiotemporal variability and various uncertainties in the future.

Implications: Atmospheric CO₂ has long been modeled and studied on continental to global scales to understand the global carbon cycle. This work demonstrates the potential of modeling and studying CO₂ variability at fine spatiotemporal scales with CMAQ, which has been applied extensively, to study traditionally regulated air pollutants. The abundant observational records of these air pollutants and successful experience in studying and reducing their emissions may be useful for verifying CO₂ emissions. Although there remains much more to further investigate, this work opens up a discussion on whether and how to study CO₂ as an air pollutant.     

Pyrrolidinium Imides: Promising Ionic Liquids for Direct Capture of Elemental Mercury from Flue Gas

A new approach to vapor phase elemental mercury capture has been explored; this approach exploits an ionic liquid coating layer to oxidize elemental mercury for subsequent immobilization by chelating ligands. The room temperature ionic liquid 1-butyl-1-methyl pyrrolidinium bis(trifluoromethane sulfonyl)imide (P₁₄) was selected for study based on its oxidation potential window, thermal stability, and low vapor pressure. Tests were also completed in which KMnO₄ was added to P₁₄ to form a new ionic liquid, P₁₄–KMnO₄, with a higher oxidation potential. In room-temperature bulk liquid phase capture experiments, 59% of the elemental mercury in the inlet gas was captured using P₁₄ alone; mercury capture using P₁₄–KMnO₄ was quantitative. P₁₄ and P₁₄–KMnO₄ coatings were successfully applied to mesoporous silica substrates and to silica substrates functionalized with mercury chelating ligands. The coating layers were found to be thermally stable up to 300°C. Fixed-bed tests of nonfunctionalized silica coated with P₁₄ showed an elemental mercury uptake of 2.7 mg/g adsorbent at 160°C; at the same temperature, functionalized silica coated with P₁₄–KMnO₄ showed an elemental mercury capacity of at least 7.2 mg/g adsorbent, several times higher than that of activated carbon. The empty bed gas residence time in these tests was 0.04 s. A chelating adsorbent incorporating P₁₄ in the coating layer, may be capable of simultaneous removal of elemental and oxidized mercury from coal combustion flue gases.     

Study of the chemistry of an acid soil column and of the corresponding leachates after the addition of an anaerobic municipal sludge

A column leaching study was carried out over a period of 77 days to determine the changes in the chemistry of an acid soil and of the corresponding leachates after the addition of an anaerobic sludge (equivalent to 69 Mg DW ha⁻¹). By the end of the experiment, the addition of the sludge to the soil had induced an increase in soil pH (from pH 3.6–4.0 to pH 4.1–4.8), in spite of the pronounced decrease in pH detected in the leachates by day 18 of the experiment. The decrease in pH (down to pH 3.3) occurred at the same time as leachate SO₄ and Fe peaked. Once the acidification attributed to sulphide oxidation ceased, the “liming effect” of the sludge became evident and counteracted further proton production – such as that associated with oxidation of NH₄ – at least for the duration of the study. Concentrations of Zn, Cd, Ni, and to a lesser extent, Pb in leachates displayed pulses at the beginning of the experiment (first 12 days), whereas the concentration of Cu followed a more irregular pattern; the concentrations of these metals never surpassed the European threshold values for drinking water. In contrast, concentrations of NO₃, Mn, and Cr in leachates had increased by the end of the experiment – in parallel with an increase in dissolved organic C (DOC) – and surpassed the European threshold for drinking water. Mineralisation of native soil organic C (SOC) was enhanced by the addition of this N-rich residue, and the organic C mass balance at the end of the experiment was negative. Nitrogen mass balance, although positive, exhibited a loss of 77% of the N added to the system. The results obtained indicate that application of this sewage sludge to a soil with a pH < 5, at the loading rate used here, and without liming (i.e., non fulfilment of the requirements of the present European Directive) may pose a risk in terms of groundwater contamination.     

Fenton's pre-treatment of mature landfill leachate

The aim of this study was to check the effectiveness of the Fenton's reagent (Fe2+ + H2O2 + H+) for the pre-treatment of a municipal landfill leachate with the objective of improving its overall biodegradability, evaluated in terms of BOD5/COD ratio, up to a value compatible with biological treatment. The leachate came from a municipal sanitary landfill located in southern Italy and the average values of its main parameters were: pH=8.2; COD=10,540 mgl(-1); BOD5=2,300 mgl(-1); TOC=3,900 mgl(-1); NH4-N=5210 mgl(-1); conductivity=45,350 microScm(-1); alkalinity=21,470 mgl(-1) CaCO3. The effect of initial pH value on the pre-treatment effectiveness was evaluated by titrating the amount of acidic by-products formed. The extent of leachate oxidation was monitored and controlled by both pH and redox potential measurements. The best operational conditions for achieving the desired goal (i.e., BOD5/COD> or =0.5) resulted: Fe2+=275 mgl(-1); H2O2=3,300 mgl(-1); initial pH=3; reaction time=2 h. At the end of the Fenton's pre-treatment, in order to permit a subsequent biological treatment, residual ferric ions were removed increasing the pH up to 8.5 by adding 3 gl(-1) of Ca(OH)2 and 3 mgl(-1) of a cationic polyelectrolyte, the latter as an aid to coagulation. This final step also resulted in a further modest removal of residual COD due to co-precipitation phenomena.     

Occupational risk assessment in construction industry – Overview and reflection

The construction industry is plagued by occupational risky situations and poor working conditions. Occupational risk assessment (ORA) on workplace sites is the first and key step to achieve adequate safety levels, particularly to support decision-making in safety programs. Most construction safety efforts are applied informally under the premise that simply allocating more resources to safety management will improve safety on site. Moreover, there are many traditional methods to address ORA, but few have been adapted and validated for use in the construction industry, particularly in the design stage, for which traditional approaches do not give adequate answers. This paper presents a state-of-the-art on ORA traditional methods, for the construction industry, discussing their limitations and pointing advantages of using fuzzy sets approaches to deal with ill-defined situations.     

A Satellite Model of Forest Flammability

We describe a model of forest flammability, based on daily satellite observations, for national to regional applications. The model defines forest flammability as the percent moisture content of fuel, in the form of litter of varying sizes on the forest floor. The model uses formulas from the US Forest Service that describe moisture exchange between fuel and the surrounding air and precipitation. The model is driven by estimates of temperature, humidity, and precipitation from the moderate resolution imaging spectrometer and tropical rainfall measuring mission multi-satellite precipitation analysis. We provide model results for the southern Amazon and northern Chaco regions. We evaluate the model in a tropical forest-to-woodland gradient in lowland Bolivia. Results from the model are significantly correlated with those from the same model driven by field climate measurements. This model can be run in a near real-time mode, can be applied to other regions, and can be a cost-effective input to national fire management programs.     

Setting population targets for mammals using body mass as a predictor of population persistence

Conservation planning and biodiversity assessments need quantitative targets to optimize planning options and assess the adequacy of current species protection. However, targets aiming at persistence require population‐specific data, which limit their use in favor of fixed and nonspecific targets, likely leading to unequal distribution of conservation efforts among species. We devised a method to derive equitable population targets; that is, quantitative targets of population size that ensure equal probabilities of persistence across a set of species and that can be easily inferred from species‐specific traits. In our method, we used models of population dynamics across a range of life‐history traits related to species’ body mass to estimate minimum viable population targets. We applied our method to a range of body masses of mammals, from 2 g to 3825 kg. The minimum viable population targets decreased asymptotically with increasing body mass and were on the same order of magnitude as minimum viable population estimates from species‐ and context‐specific studies. Our approach provides a compromise between pragmatic, nonspecific population targets and detailed context‐specific estimates of population viability for which only limited data are available. It enables a first estimation of species‐specific population targets based on a readily available trait and thus allows setting equitable targets for population persistence in large‐scale and multispecies conservation assessments and planning.     

Community perspectives on managing health of peri-urban river system: evidence from the Hawkesbury-Nepean river catchment,Australia

In this study, we examine aspects of community values and perspectives on goods and services received from the river along with issues related to sustainable management of the river. The study reveals that the contemporary values placed on rivers by communities are mostly associated with recreational and leisure activities. The distance from the river and age of the participants appeared as the most influential social demographic factors affecting participants' perspectives on river health. The study indicates that people tend to develop a strong bond with the natural resources around them and the amount of time spent at a location is directly related to the strength of this relationship. To assess the general river condition and health, a number of visual indicators (e.g., floating debris) were suggested. If properly standardised and calibrated, such indicators have the potential to develop cost-effective monitoring tools for detecting seasonal and spatial changes in river health.