Experimental investigation of hydrogen–air deflagrations and detonations in semi-confined flat layers

This paper presents results of an experimental investigation on the deflagration and deflagration-to-detonation transition (DDT) in an obstructed (blockage ratio BR = 50%), semi-confined flat layer filled with uniform hydrogen–air mixtures. The effect of mixture reactivity depending on flat layer thickness and its width is studied to evaluate the critical conditions for sonic flame propagation and the possibility for detonation onset. The experiments were performed in a transparent, rectangular channel with a length of 2.5 m. The flat layer thickness was varied from 0.06 to 0.24 m and the experiments were performed for different channel widths of 0.3, 0.6 and 0.9 m. The experimental results show flame velocity vs. hydrogen concentration for different thicknesses and widths of the semi-confined flat layer. Three different flame propagation regimes were observed: slow subsonic flame (M << 1), sonic deflagration (M ～ 1) and detonation (M >> 1). It is shown that flame acceleration (FA) to sonic speed is independent of the width of the flat layer. The critical expansion ratio for effective flame acceleration to sonic speed was found to be linearly dependent on the reciprocal layer thickness.     

Worst-case identification of gas dispersion for gas detector mapping using dispersion modeling

To quickly and accurately quantify the material release in process units, gas detectors may be placed according to the results of gas dispersion modeling. DNV's PHAST software is one of the most useful and reliable tools for material dispersion modeling. In this software, fluid dispersion is modeled based on the process conditions, the weather conditions and the specifications of the material release point. However, varying weather conditions throughout the year and the exact determination of the release point on the plot plan and the release elevation are problematic; these issues cause the results to be non-exact and non-integrated. Choosing the most appropriate conditions is challenging. In this paper, a scheme was provided to select the most appropriate conditions for gas dispersion modeling. This scheme approaches modeling based on the worst-case scenario (the situation in which the dispersed gas reaches the detector later in comparison to the other cases). Therefore, different weather conditions, release elevations and release points on the plot plan were modeled for an absorber tower of the Gonbadli Dehydration Unit of the Khangiran Refinery. The worst case of each release condition was then chosen. Finally, gas detectors were placed using the gas dispersion modeling results based on the worst-case scenario.     

Media surface properties and the development of nitrifying biofilms in mixed cultures for wastewater treatment

Plastic was tested to select biofilm support media that would enhance nitrification in the presence of heterotrophs. Eight different types (acrylonitrile butadiene styrene, nylon, polycarbonate, polyethylene, polypropylene, polytetrafluoroethylene (PTFE), polyvinyl chloride and tufnol) were immersed in an aerobic fed-batch reactor receiving domestic settled wastewater. Nitrification rates did not correlate with biomass concentrations, nor surface roughness of the plastics as measured by atomic force microscopy (AFM). The maximum nitrification rate of 1.5 g/m² d^?1 was obtained from biofilms growing on PTFE which had the lowest surface adhesion force (8 nN). Nitrification rates for the biofilms were inversely correlated with the attraction forces as measured by AFM.     

Ag3PO4/g-C3N4复合光催化剂的制备及其可见光催化性能

采用简单的原位沉淀法合成了可见光驱动型光催化剂Ag₃PO₄/g-C₃N₄.利用X-射线衍射（XRD）、傅里叶红外光谱（FT-IR）、扫描电子显微镜（SEM）、X-射线能谱（XPS）以及紫外可见漫反射光谱（UV-Vis DRS）等表征手段对合成的样品进行了表征.与单一的Ag₃PO₄和g-C₃N₄相比,Ag₃PO₄/g-C₃N₄复合材料对左氧氟沙星表现出了更高的催化效率.根据能带分析和自由基捕获试验,提出了Ag₃PO₄/g-C₃N₄复合材料Z型异质结构的作用机制.     

Biological methane production coupled with sulfur oxidation in a microbial electrosynthesis system without organic substrates

Methane is produced in a microbial electrosynthesis system (MES) without organic substrates. However, a relatively high applied voltage is required for the bioelectrical reactions. In this study, we demonstrated that electrotrophic methane production at the biocathode was achieved even at a very low voltage of 0.1 V in an MES, in which abiotic HS⁻ oxidized to SO₄²⁻ at the anodic carbon-cloth surface coated with platinum powder. In addition, microbial community analysis revealed the most probable pathway for methane production from electrons. First, electrotrophic H₂ was produced by syntrophic bacteria, such as Syntrophorhabdus, Syntrophobacter, Syntrophus, Leptolinea, and Aminicenantales, with the direct acceptance of electrons at the biocathode. Subsequently, most of the produced H₂ was converted to acetate by homoacetogens, such as Clostridium and Spirochaeta 2. In conclusion, the majority of the methane was indirectly produced by a large population of acetoclastic methanogens, namely Methanosaeta, via acetate. Further, hydrogenotrophic methanogens, including Methanobacterium and Methanolinea, produced methane via H₂.     

Status of air pollution in Beijing

A study has been made on elements organic constituents, TSP, SO2,NO2 of atmospheric pollutants in Beijing. 17 elements, and some PAHs, e. g. B(a)P, B(b, j, k)P, and B(g, h, i)P, in airborne particles by X-ray fluorescence spectroscopy and HPLC, GC/MS, have been determined respectively. It has been shown that the elements Pb, Zn, S and Cu were more enriched in fine particles and different valence states of sulfur at various sites. It was found that the concentrations of S6+ and S2-were more than 85% and less than 15% of the total sulfur respectively. Concentrations of major PAHs and sulfur-containing compounds increased in winter and in urban area. High values for Pb and Zn in city, Fe and Mn at industrial area and Cu, Al rural sites were obtained respectively. This implies the functions of different elemental sources of various sites. Thus, elements can be from distingushed anthropogenic and natural sources.The main contribution of SO2 was found of to have same seasonal variation as the anthropogenic el     

Development of vermicast from sludge and powdered oyster shell

Soil acidification is one of the rising land degradation issues facing world agriculture. The risk of acidification is currently being assessed as part of agriculture productivity and sustainable theme. This study was conducted to produce a new vermicomposting cast as a recycling resource derived from municipal sewage sludge and waste oyster shell. The earthworm, Eisenia Andrei, was fed under different conditions. The most suitable mixture was 77:23 w/w% of sewage sludge and waste oyster shell. Powdered oyster shell (POS) sludge blend provided a stable pH, due to its buffering capacity during vermiculture because of the Ca²⁺ and OH^? release effect. The vermicast products fulfilled the cast standards of Korea Ministry of Environment for all the parameters such as moisture content, pH, salinity, organic carbon, TKN, Phosphate, and heavy metals. Slowly released organic matter when added to soil improves the capacity of the soil to hold nutrients for plants, improve soil aeration for roots, and improves soil drainage. This product will be an addition to already-commercialized sludge vermicast as a higher value product.     

Adopting and applying eco-design techniques: a practitioners perspective

This paper discusses the findings of a small scale research project which explored the possibility of adopting eco-design techniques. The paper focuses on identifying how eco-design techniques can be determined as being compatible with new product development processes. Via the development of a five stage ‘applicability framework’, this study demonstrates how a compatible suite of tools can be identified for application to product development processes. Testing and validation of this ‘applicability framework’, which was used to identify three key eco-design techniques; namely checklists, guidelines, and a material, energy and toxicity (MET) matrix, is shown to have taken place in relation to the development of a lightweight chemical detector product. It is established that checklists, guidelines and the MET matrix can be used both on a specific product, and also more generally in the design process. In particular, the MET matrix is shown as being used to successfully identify key environmental aspects of the product during its lifetime. The paper concludes by arguing that eco-design techniques may not have been more widely adopted by businesses because such methods are not necessarily generic and immediately applicable, but instead require some form of process-specific customisation prior to use, which can in turn act as a barrier to adoption. It is also highlighted that the shear diversity of pressures that come to bear during the product development process can also act as a barrier to adoption, and that the full integration of eco-design techniques will have to encompass approaches which overcome such pressures.     

Changes of movement patterns from early dispersal to settlement

Moving and spatial learning are two intertwined processes: (a) changes in movement behavior determine the learning of the spatial environment, and (b) information plays a crucial role in several animal decision-making processes like movement decisions. A useful way to explore the interactions between movement decisions and learning of the spatial environment is by comparing individual behaviors during the different phases of natal dispersal (when individuals move across more or less unknown habitats) with movements and choices of breeders (who repeatedly move within fixed home ranges), that is, by comparing behaviors between individuals who are still acquiring information vs. individuals with a more complete knowledge of their surroundings. When analyzing movement patterns of eagle owls, Bubo bubo, belonging to three status classes (floaters wandering across unknown environments, floaters already settled in temporary settlement areas, and territory owners with a well-established home range), we found that: (1) wandering individuals move faster than when established in a more stable or fixed settlement area, traveling larger and straighter paths with longer move steps; and (2) when floaters settle in a permanent area, then they show movement behavior similar to territory owners. Thus, movement patterns show a transition from exploratory strategies, when animals have incomplete environmental information, to a more familiar way to exploit their activity areas as they get to know the environment better.