Young drivers' perceptions of culpability of sleep-deprived versus drinking drivers

Introduction: Sleep-deprived driving can be as dangerous as alcohol-impaired driving, however, little is known about attitudes toward sleep-deprived drivers. This study examined the extent to which young drivers regard sleep-deprived compared to drinking drivers as culpable for a crash, and how their perceptions of driving while in these conditions differ. Method: University student participants (N = 295; M = 20.4 years, SD = 1.3; 81% women) were randomly assigned to read one of five fatal motor-vehicle crash scenarios, which differed by aspects of the driver's condition. Culpability ratings for the drinking driver were higher than those for the sleep-deprived driver. Results: Qualitative findings revealed that driving while sleep-deprived was viewed as understandable, and driving after drinking was viewed as definitely wrong. The dangers of sleep-deprived driving remain under-recognized.     

Acquisition of spatial knowledge for routes

An important issue in the study of spatial knowledge has been the distinction between configurational and route knowledge. Route knowledge is characterized by the knowledge of sequential locations without the knowledge of general interrelationships. In contrast, configurational knowledge is characterized by the ability to generalize beyond learned routes and locate objects within a general frame of reference. These two types of knowledge are contrasted in a learning experiment, in which subjects acquire spatial information either from a map or a slide presentation. Furthermore, the structure of their spatial knowledge is derived from free-recall data using the ordered tree clustering algorithm. The results show, first, that subjects in the map condition acquired more accurate configurational knowledge. Second, we found that route knowledge can be acquired either through route presentation or map presentation. Third, there are individual differences within the slide group, such that some subjects were able to acquire configurational knowledge. And fourth, ordered trees are able to account for some of these differences, and thus identify the degree of configurational knowledge acquired by the slide subjects.     

Spatial differences in outdoor PM10 mass and aerosol composition in Mexico City

Twenty-five MiniVol samplers were operated throughout the Mexico City metropolitan region from February 22 through March 22, 1997, to evaluate the variability of PM10 concentrations and composition. The highest PM10 concentrations were found in neighborhoods with unpaved or dirty roads, and elements related to crustal material were the main cause of differences from nearby (<200 m) monitors that were not adjacent to the roadbed. SO4(2-) concentrations were homogeneous across the city. SO4(2-) measured at the city boundaries was about two-thirds of the concentrations measured within the urbanized area, indicating that most SO4(2-) is of regional origin. Elemental carbon (EC) and organic carbon (OC) concentrations were highly variable, with higher concentrations in areas that had high diesel traffic and older vehicles. Spatial correlations among PM10 concentrations were high, even though absolute concentrations were variable, indicating a common effect of meteorology on the concentration or dispersion of local emissions.     

The impact of ozone on a salt marsh cordgrass (Spartina alterniflora)

Spartina alterniflora plants were collected from salt marshes within New Jersey, South Carolina, and Georgia USA and shipped to The Pennsylvania State University. New plants were grown from rhizomes in six open-top field chambers. Three chambers received charcoal-filtered air, and three received charcoal-filtered air plus 80 ppb ozone, 8 h/day for 65 days. Flower, leaf, and shoot number per plant were recorded weekly. Photosynthetic rates were measured in week 5, and foliar injury was assessed during week 9. Final dry weight of roots, shoots, and rhizomes were determined. While ozone-treated plants from all states expressed symptoms of ozone injury, plants from South Carolina exhibited no effect of ozone on any other measured variable. Plants from the Georgia site showed ozone-induced reductions in all measured variables except leaf dry weight. Ozone-treated plants from New Jersey showed reductions in photosynthetic rate, leaf and shoot number, and root dry weights. Only plants from New Jersey produced flowers, with ozone treatment causing delay in flowering and reduction in the number of flower spikes produced.     

Measurement of ultrafine particle size distributions from coal-, oil-, and gas-fired stationary combustion sources

Currently, we have limited knowledge of the physical and chemical properties of emitted primary combustion aerosols and the changes in those properties caused by nucleation, condensation growth of volatile species, and particle coagulations under dilution and cooling in the ambient air. A dilution chamber was deployed to sample exhaust from a pilot-scale furnace burning various fuels at a nominal heat input rate of 160 kW/h(-1) and 3% excess oxygen. The formation mechanisms of particles smaller than 420 nm in electrical mobility diameter were experimentally investigated by measurement with a Scanning Mobility Particle Sizer (SMPS) as a function of aging times, dilution air ratios, combustion exhaust temperatures, and fuel types. Particle formation in the dilution process is a complex mixture of nucleation, coagulation, and condensational growth, depending on the concentrations of available condensable species and solid or liquid particles (such as soot, ash) in combustion exhausts. The measured particle size distributions in number concentrations measured show peaks of particle number concentrations for medium sulfur bituminous coal, No. 6 fuel oil, and natural gas at 40-50 nm, 70-100 nm, and 15-25 nm, respectively. For No. 6 fuel oil and coal, the particle number concentration is constant in the range of a dilution air ratio of 50, but the number decreases as the dilution air ratio decreases to 10. However, for natural gas, the particle number concentration is higher at a dilution air ratio of 10 and decreases at dilution air ratios of 20-50. At a dilution air ratio of 10, severe particle coagulation occurs in a relatively short time. Samples taken at different combustion exhaust temperatures for these fuel types show higher particle number concentrations at 645 K than at 450 K. As the aging time of particles increases, the particles increase in size and the number concentrations decrease. The largest gradient of particle number distribution occurs within the first 10 sec after dilution but shows only minor differences between 10 and 80 sec. The lifetimes of the ultrafine particles are relatively short, with a scale on the order of a few seconds. Results from this study suggest that an aging time of 10 sec and a dilution air ratio of 20 are sufficient to obtain representative primary particle emission samples from stationary combustion sources.     

Scent of a queen—cuticular hydrocarbons specific for female reproductives in lower termites

In social insects, it is assumed that signals of the queen inform nestmates about her reproductive status. Thus, workers forego their own reproduction if the queen signals high fertility. In hemimetabolous termites, little is known about reproductive inhibition, but evidence exists for a royal-pair control. Workers of lower termites exhibit a high developmental flexibility and are potentially able to become reproductives, but the presence of a fertile reproductive restrains them from reaching sexual maturity. The nature of this control, however, remains unknown. Here, we report on qualitative differences in cuticular hydrocarbon profiles between queens and workers of the basal drywood termite Cryptotermes secundus. Queens were characterized by a shift to long-chained and branched hydrocarbons. Most remarkably, similar chemical patterns are regarded as fertility cues of reproductives in social Hymenoptera. This might suggest that both groups of social insects convergently evolved similar chemical signatures. The present study provides deeper insights into how termites might have socially exploited these signatures from sexual communication in their cockroach-like ancestor. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Seed dispersal of desert annuals

We quantified seed dispersal in a guild of Sonoran Desert winter desert annuals at a protected natural field site in Tucson, Arizona, USA. Seed production was suppressed under shrub canopies, in the open areas between shrubs, or both by applying an herbicide prior to seed set in large, randomly assigned removal plots (10-30 m diameter). Seedlings were censused along transects crossing the reproductive suppression borders shortly after germination. Dispersal kernels were estimated for Pectocarya recurvata and Schismus barbatus from the change in seedling densities with distance from these borders via inverse modeling. Estimated dispersal distances were short, with most seeds traveling less than a meter. The adhesive seeds of P. recurvata went farther than the small S. barbatus seeds, which have no obvious dispersal adaptation. Seeds dispersed farther downslope than upslope and farther when dispersing into open areas than when dispersing into shrubs. Dispersal distances were short relative to the pattern of spatial heterogeneity created by the shrub and open space mosaic. This suggests that dispersal could contribute to local population buildup, possibly facilitating species coexistence. Overall, these results support the hypothesis that escape in time via delayed germination is likely to be more important for desert annuals than escape in space.     

Separation of brown carbon from black carbon for IMPROVE and Chemical Speciation Network PM2.5 samples

The replacement of the Desert Research Institute (DRI) model 2001 with model 2015 thermal/optical analyzers (TOAs) results in continuity of the long-term organic carbon (OC) and elemental carbon (EC) database, and it adds optical information with no additional carbon analysis effort. The value of multiwavelength light attenuation is that light absorption due to black carbon (BC) can be separated from that of brown carbon (BrC), with subsequent attribution to known sources such as biomass burning and secondary organic aerosols. There is evidence of filter loading effects for the 25% of all samples with the highest EC concentrations based on the ratio of light attenuation to EC. Loading corrections similar to those used for the seven-wavelength aethalometer need to be investigated. On average, nonurban Interagency Monitoring of PROtected Visual Environments (IMPROVE) samples show higher BrC fractions of short-wavelength absorption than urban Chemical Speciation Network (CSN) samples, owing to greater influence from biomass burning and aged aerosols, as well as to higher primary BC contributions from engine exhaust at urban sites. Sequential samples taken during an Everglades National Park wildfire demonstrate the evolution from flaming to smoldering combustion, with the BrC fraction increasing as smoldering begins to dominate the fire event.

Implications: The inclusion of seven wavelengths in thermal/optical carbon analysis of speciated PM_2.5 (particulate matter with an aerodynamic diameter ≤2.5 μm) samples allows contributions from biomass burning and secondary organic aerosols to be estimated. This separation is useful for evaluating control strategy effectiveness, identifying exceptional events, and determining natural visibility conditions.     

Air quality measurements—From rubber bands to tapping the rainbow

It is axiomatic that good measurements are integral to good public policy for environmental protection. The generalized term for “measurements” includes sampling and quantitation, data integrity, documentation, network design, sponsorship, operations, archiving, and accessing for applications. Each of these components has evolved and advanced over the last 200 years as knowledge of atmospheric chemistry and physics has matured. Air quality was first detected by what people could see and smell in contaminated air. Gaseous pollutants were found to react with certain materials or chemicals, changing the color of dissolved reagents such that their light absorption at selected wavelengths could be related to both the pollutant chemistry and its concentration. Airborne particles have challenged the development of a variety of sensory devices and laboratory assays for characterization of their enormous range of physical and chemical properties. Advanced electronics made possible the sampling, concentration, and detection of gases and particles, both in situ and in laboratory analysis of collected samples. Accurate and precise measurements by these methods have made possible advanced air quality management practices that led to decreasing concentrations over time. New technologies are leading to smaller and cheaper measurement systems that can further expand and enhance current air pollution monitoring networks.

Implications: Ambient air quality measurement systems have a large influence on air quality management by determining compliance, tracking trends, elucidating pollutant transport and transformation, and relating concentrations to adverse effects. These systems consist of more than just instrumentation, and involve extensive support efforts for siting, maintenance, calibration, auditing, data validation, data management and access, and data interpretation. These requirements have largely been attained for criteria pollutants regulated by National Ambient Air Quality Standards, but they are rarely attained for nonroutine measurements and research studies.