Real-time measurement of outdoor tobacco smoke particles

The current lack of empirical data on outdoor tobacco smoke (OTS) levels impedes OTS exposure and risk assessments. We sought to measure peak and time-averaged OTS concentrations in common outdoor settings near smokers and to explore the determinants of time-varying OTS levels, including the effects of source proximity and wind. Using five types of real-time airborne particle monitoring devices, we obtained more than 8000 min worth of continuous monitoring data, during which there were measurable OTS levels. Measurement intervals ranged from 2 sec to 1 min for the different instruments. We monitored OTS levels during 15 on-site visits to 10 outdoor public places where active cigar and cigarette smokers were present, including parks, sidewalk cafés, and restaurant and pub patios. For three of the visits and during 4 additional days of monitoring outdoors and indoors at a private residence, we controlled smoking activity at precise distances from monitored positions. The overall average OTS respirable particle concentration for the surveys of public places during smoking was approximately 30 microg m(-3). OTS exhibited sharp spikes in particle mass concentration during smoking that sometimes exceeded 1000 microg m(-3) at distances within 0.5 m of the source. Some average concentrations over the duration of a cigarette and within 0.5 m exceeded 200 microg m(-3), with some average downwind levels exceeding 500 microg m(-3). OTS levels in a constant upwind direction from an active cigarette source were nearly zero. OTS levels also approached zero at distances greater than approximately 2 m from a single cigarette. During periods of active smoking, peak and average OTS levels near smokers rivaled indoor tobacco smoke concentrations. However, OTS levels dropped almost instantly after smoking activity ceased. Based on our results, it is possible for OTS to present a nuisance or hazard under certain conditions of wind and smoker proximity.     

Damage to offshore oil and gas facilities following hurricanes Katrina and Rita: An overview

Hurricanes Katrina and Rita hit the centre of the American petrochemical industry, shutting down eight refineries, hundreds of oil-drilling and production platforms, and many other industrial facilities. Furthermore, it triggered unprecedented numbers of hazardous-materials releases from industrial facilities and storage terminals onshore, as well as from oil and gas production facilities offshore in the Gulf of Mexico (GoM). In this paper, we analyse the damage caused by the two hurricanes on the offshore oil and gas industry. Hurricanes Katrina and Rita caused the largest number of destroyed and damaged platforms and pipelines, and the highest number of mobile offshore drilling units set adrift in the history of GoM operations. Following the hurricanes, changes have been proposed to operating and emergency procedures, maintenance requirements, and design practices including mooring practices for mobile offshore drilling units.     

Meta‐analytic tests of relationships between organizational justice and citizenship behavior: testing agent‐system and shared‐variance models

Research on the unique effects of different types of perceived fairness on citizenship behavior that benefits individuals (organizational citizenship behavior (OCB‐I) and organizations (OCB‐O) has produced mixed results. We assert that how OCB‐O and OCB‐I are conceptualized affects the patterns of results, and we hypothesize that, when OCB is conceptualized appropriately, an agent‐system model is supported (interactional and procedural justice are the strongest unique predictors of OCB‐I and OCB‐O, respectively). We also hypothesize that shared variance among the justice types explains additional variance in OCB. Analyses of semi‐ partial correlations conducted on meta‐analytic coefficients supported our hypotheses. Theoretical and practical implications are discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Passenger distractions among adolescent drivers

PROBLEM: Adolescents who drive with peers are known to have a higher risk of crashes. While passengers may distract drivers, little is known about the circumstances of these distractions among teen drivers. METHOD: This study used survey data on driving among 2,144 California high school seniors to examine distractions caused by passengers. RESULTS: Overall, 38.4% of youths who drove reported having been distracted by a passenger. Distractions were more commonly reported among girls and students attending moderate- to high-income schools. Talking or yelling was the most commonly reported type of distraction. About 7.5% of distractions reported were deliberate, such as hitting or tickling the driver or attempting to use the vehicle's controls. Driving after alcohol use and having had a crash as a driver were both significant predictors of reporting passenger-related distraction. CONCLUSION: Adolescents often experience distractions related to passengers, and in some cases these distractions are intentional. IMPACT ON INDUSTRY: These results provide information about teenage drivers who are distracted by passenger behaviors. In some cases, passengers attempted to use vehicle controls; however, it seems unlikely that this behavior is common enough to warrant redesign of controls to make them less accessible to passengers.     

On the implementation of an International Curriculum on Hydrogen Safety Engineering into higher education

This paper describes the implementation of an International Curriculum on Hydrogen Safety Engineering into higher education. The curriculum is being developed as part of the educational and training activities of the European Network of Excellence Safety of Hydrogen as an Energy Carrier (HySafe) and has been implemented into a 1-year Postgraduate Certificate Course in Hydrogen Safety Engineering by the University of Ulster. The course is taught in the distance learning mode and comprises of two 30 CATS-point modules, namely, ‘Principles of Hydrogen Safety’ and ‘Applied Hydrogen Safety’. The first delivery of this course began in January 2007 and the second delivery will commence in September 2007.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.     

Matrix based fertilizers reduce nitrogen and phosphorus leaching in three soils

We compared the efficacy of matrix based fertilizers (MBFs) formulated to reduce NO3-, NH4+, and total phosphorus (TP) leaching, with Osmocoate 14-14-14, a conventional commercial slow release fertilizer (SRF) and an unamended control in three different soil textures in a greenhouse column study. The MBFs covered a range of inorganic N and P in compounds that are relatively loosely bound (MBF 1) to more moderately bound (MBF 2) and more tightly bound compounds (MBF 3) mixed with Al(SO4)3H2O and/or Fe2(SO4)3 and with high ionic exchange compounds starch, chitosan and lignin. When N and P are released, the chemicals containing these nutrients in the MBF bind N and P to a Al(SO4)3H2O and/or Fe2(SO4)3 starch-chitosan-lignin matrix. One milligram (8000 spores) of Glomus intradices was added to all formulations to enhance nutrient uptake. In all three soil textures the SRF leachate contained a higher amount of NH4+, NO3- and TP than leachate from all other fertilizers. In all three soils there were no consistent differences in the amount of NH4+, NO3- and TP in the MBF leachates compared to the control leachate. Plants growing in soils receiving SRF had greater shoot, root and total biomass than all MBFs regardless of Al(SO4)3H2O or Fe2(SO4)3 additions. Arbuscular mycorrhizal infection in plant roots did not consistently differ among plants growing in soil receiving SRF, MBFs and control treatments. Although the MBFs resulted in less plant growth in this experiment they may be applied to soils growing plants in areas that are at high risk for nutrient leaching to surface waters.     

Assessment of chemical, biochemical and ecotoxicological aspects in a mine soil amended with sludge of either urban or industrial origin

A greenhouse pot experiment was conducted to evaluate the effect of sewage sludge (SS), of sugar beet sludge (SBS), or of a combination of both, in the remediation of a highly acidic (pH 3.6) metal-contaminated soil, affected by mining activities. The SS was applied at 100 and 200 Mg ha(-1) (dry weight basis), and the SBS at 7 Mg ha(-1). All pots were sown with Italian ryegrass (Lolium multiflorum Lam.). After 60 d of growth, shoot biomass was quantified and analysed for Cu, Pb and Zn. The pseudo-total and bioavailable contents of Cu, Pb and Zn and the enzymatic activities of beta-glucosidase, acid phosphatase, cellulase, protease and urease were determined in the soil mixtures. Two indirect acute bioassays with leachates from the soil (luminescent inhibition of Vibrio fischeri and Daphnia magna immobilization) were also used. The SS, in particular when in combination with SBS, corrected soil acidity, while increasing the total organic matter content and the cation exchange capacity. The application of SS led to a decrease in the level of effective bioavailable metals (extracted by 0.01 M CaCl(2), pH 5.7, without buffer), but caused an increase in their potential bioavailability (extracted by a solution of 0.5M NH(4)CH(3)COO, 0.5 M CH(3)COOH and 0.01 M EDTA, pH 4.7). Plant biomass increased more than 10 times in the presence of 100 Mg SS ha(-1), and more than five times with the combined use of 100 Mg SS ha(-1) and SBS, but a considerable phytotoxic effect was observed for the application rate of 200 Mg SS ha(-1). Copper, Pb and Zn concentrations in the shoots of L. multiflorum decreased significantly when using 100 Mg SS ha(-1) or SBS. The activities of beta-glucosidase, urease and protease increased with increasing SS applications rates, but cellulase had a reduced activity when using 200 Mg ha(-1)SS. Both amendments were able to suppress soil toxicity to levels that did not affect D. magna, but increased the soil leachate toxicity towards V. fischeri, especially with the application of 200 Mg SS ha(-1). This study showed that for this type of mine soils, and when using SS of similar composition, the maximum SS application rate should be 100 Mg ha(-1), and that liming the SS amended soil with SBS did not contribute to a further improvement in soil quality.