Nitrogen fertilizer form and associated nitrate leaching from cool-season lawn turf

Various N fertilizer sources are available for lawn turf. Few field studies, however, have determined the losses of nitrate (NO(3)-N) from lawns receiving different formulations of N fertilizers. The objectives of this study were to determine the differences in NO(3)-N leaching losses among various N fertilizer sources and to ascertain when losses were most likely to occur. The field experiment was set out in a completely random design on a turf typical of the lawns in southern New England. Treatments consisted of four fertilizer sources with fast- and slow-release N formulations: (i) ammonium nitrate (AN), (ii) polymer-coated sulfur-coated urea (PCSCU), (iii) organic product, and (iv) a nonfertilized control. The experiment was conducted across three years and fertilized to supply a total of 147 kg N ha(-1) yr(-1). Percolate was collected with zero-tension lysimeters. Flow-weighted NO(3)-N concentrations were 4.6, 0.57, 0.31, and 0.18 mg L(-1) for AN, PCSCU, organic, and the control, respectively. After correcting for control losses, average annual NO(3)-N leaching losses as a percentage of N applied were 16.8% for AN, 1.7% for PCSCU, and 0.6% for organic. Results indicate that NO(3)-N leaching losses from lawn turf in southern New England occur primarily during the late fall through the early spring. To reduce the threat of NO(3)-N leaching losses, lawn turf fertilizers should be formulated with a larger percentage of slow-release N than soluble N.     

Evaluating microbial purification during soil treatment of wastewater with multicomponent tracer and surrogate tests

Soil treatment of wastewater has the potential to achieve high purification efficiency, yet the understanding and predictability of purification with respect to removal of viruses and other pathogens is limited. Research has been completed to quantify the removal of virus and bacteria through the use of microbial surrogates and conservative tracers during controlled experiments with three-dimensional pilot-scale soil treatment systems in the laboratory and during the testing of full-scale systems under field conditions. The surrogates and tracers employed included two viruses (MS-2 and PRD-1 bacteriophages), one bacterium (ice-nucleating active Pseudomonas), and one conservative tracer (bromide ion). Efforts have also been made to determine the relationship between viruses and fecal coliform bacteria in soil samples below the wastewater infiltrative surface, and the correlation between Escherichia coli concentrations measured in percolating soil solution as compared with those estimated from analyses of soil solids. The results suggest episodic breakthrough of virus and bacteria during soil treatment of wastewater and a 2 to 3 log (99-99.9%) removal of virus and near complete removal of fecal coliform bacteria during unsaturated flow through 60 to 90 cm of sandy medium. Results also suggest that the fate of fecal coliform bacteria may be indicative of that of viruses in soil media near the infiltrative surface receiving wastewater effluent. Concentrations of fecal coliform in percolating soil solution may be conservatively estimated from analysis of extracted soil solids.     

Scope insensitivity in contingent valuation of complex environmental amenities

It has been argued that respondents in contingent valuation (CV) surveys, asked to value complex environmental amenities, will state willingness to pay (WTP) independently of the scope of the project. Such insensitivity to scope would be at odds with rational choice, and could therefore imply that CV is not a theoretically valid method for biodiversity valuation. The scope test in the present CV study was applied to endangered species preservation. Respondents were split in four sub-samples facing different scopes of endangered species preservation. The design allowed for both external and internal scope tests. Furthermore, the tests were split according to elicitation format. Of four external tests of insensitivity to scope, one was rejected, two gave mixed results, depending on either the type of test or elicitation format, and for the last one the null hypothesis could not be rejected. Of five internal tests, insensitivity to scope was rejected in three cases, one test gave mixed results, and one could not be rejected. Survey design features of the CV study, especially an unfamiliar sub-group of endangered species, could explain the apparent insensitivity to scope observed.     

Multicriteria evaluation of simulated logging scenarios in a tropical rain forest

Forest growth models are useful tools for investigating the long-term impacts of logging. In this paper, the results of the rain forest growth model FORMIND were assessed by a multicriteria decision analysis. The main processes covered by FORMIND include tree growth, mortality, regeneration and competition. Tree growth is calculated based on a carbon balance approach. Trees compete for light and space; dying large trees fall down and create gaps in the forest. Sixty-four different logging scenarios for an initially undisturbed forest stand at Deramakot (Malaysia) were simulated. The scenarios differ regarding the logging cycle, logging method, cutting limit and logging intensity. We characterise the impacts with four criteria describing the yield, canopy opening and changes in species composition. Multicriteria decision analysis was used for the first time to evaluate the scenarios and identify the efficient ones. Our results plainly show that reduced-impact logging scenarios are more 'efficient' than the others, since in these scenarios forest damage is minimised without significantly reducing yield. Nevertheless, there is a trade-off between yield and achieving a desired ecological state of logged forest; the ecological state of the logged forests can only be improved by reducing yields and enlarging the logging cycles. Our study also demonstrates that high cutting limits or low logging intensities cannot compensate for the high level of damage caused by conventional logging techniques.     

A composite medium approximation for unsaturated flow in layered sediments

Saturated-unsaturated flow in strictly layered sediments proceeds via conductors in parallel in the direction parallel to bedding, and via resistors in series in the direction perpendicular to bedding. On sufficiently small scales of space and time, flow in such media will be subject to approximate capillary equilibrium locally, which provides a basis for approximating the effective hydraulic conductivity of a composite multi-layer medium in terms of the conductivities of the individual layers. Equations for the hydraulic conductivity tensor in "composite medium approximation" (COMA) are given in a coordinate system aligned with bedding. Hydraulic conductivity parallel to bedding is generally larger than in the perpendicular direction. The anisotropy depends on the spread of the conductivity distribution, and tends to increase for dryer conditions. The COMA model was implemented in a multi-phase flow simulator and tested by comparison with high-resolution simulations in which all layering heterogeneity is resolved explicitly. Under favorable conditions, COMA is found to accurately represent sub-grid scale flow and transport processes, providing a practical method for simulating field-scale flow and transport in layered media. The approximation improves when layers are thinner, and when flow rates are smaller.     

Evaluation of catalyzed and electrically heated filters for removal of particulate emissions from diesel-A- and JP-8-fueled engines

In-service diesel engines are a significant source of particulate matter (PM) emissions, and they have been subjected to increasingly strict emissions standards. Consequently, the wide-scale use of some type of particulate filter is expected. This study evaluated the effect of an Engelhard catalyzed soot filter (CSF) and a Rypos electrically heated soot filter on the emissions from in-service diesel engines in terms of PM mass, black carbon concentration, particle-bound polycyclic aromatic hydrocarbon concentration, and size distribution. Both filters capture PM. The CSF relies on the engine's exhaust to reach the catalyst regeneration temperature and oxidize soot, whereas the electrically heated filter contains a heating element to oxidize soot. The filters were installed on several military diesel engines. Particle concentrations and compositions were measured before and after installation of the filter and again after several months of operation. Generally, the CSF removed at least 90% of total PM, and the removal efficiency improved or remained constant after several months of operation. In contrast, the electrical filters removed 44-69% of PM mass. In addition to evaluating the soot filters, the sampling team also compared the results of several real-time particle measurement instruments to traditional filter measurements of total mass.     

Enumeration of hydro-biological parameters and assessment of eco-aquafarming potential in the Velachery Lake (Chennai)

In recent years, aquaculture has acquired vast potential in providing livelihood, security as well as fulfilling the nutritional requirements of the growing population. The hydro-biological parameters studied in Velachery Lake revealed that a large number of essential parameters are conforming to the levels suggested for a shrimp farm. The abundance and availability of zooplankton population reveal their importance in prawn culture.     

The effect of ozone on pollen development in Lolium perenne L

Perennial ryegrass plants (Lolium perenne L.) were exposed in "Closed-Top Chambers" to different ozone concentrations and to charcoal filtered ambient air to study the effect of ozone on the development of pollen. Ozone at ambient (65 nl l(-1), 8h) and elevated (110 nl l(-1), 4h) concentrations affected the maturing of pollen by inhibiting starch accumulation in pollen throughout the anther. Affected pollen persisted in the vacuolated state while normal pollen in the same anther were filled with amyloplasts. The percentage of underdeveloped pollen-determined in transversal sections-was significantly higher in exposed plants than in plants grown in filtered air. Results indicate that ozone stress was responsible for the disrupted development of pollen in L. perenne.     

Characterization of aerosols from biomass burning--a case study from Mizoram (Northeast), India

Physical and optical properties of biomass burning aerosols in Northeastern region, India analyzed based on measurements made during February 2002. Large spatial extent of Northeastern Region moist tropical to moist sub-tropical forests in India have high frequency of burning in annual dry seasons. Characterization of resultant trace gases and aerosols from biomass burning is important for the atmospheric radiative process. Aerosol optical depth (AOD) observed to be high during burning period compared to pre- and post-burning days. Peak period of biomass burning is highly correlated with measured AOD and total columnar water vapor. Size distribution of aerosols showed bimodal size distribution during burning day and unimodal size distribution during pre- and post-burning days. Size distribution retrievals from biomass burning aerosols show dominance of accumulation mode particles. Weighted mean radius is high (0.22 microm) during burning period. Columnar content of aerosols observed to be high during burning period in addition to the drastic reduction of visibility. During the burning day Anderson sampler measurements showed dominance of accumulation mode particles. The diurnal averaged values of surface shortwave aerosol radiative forcing af biomass burning aerosols varies from -59 to -87 Wm(-2) on different days. Measured and modeled solar irradiances are also discussed in the paper.     

Development and validation of a method for analysis of "dioxin-like" PCBs in environmental samples from the steel industry

A method, previously used for determination of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), has been modified for quantitative analysis of "dioxin-like" polychlorobiphenyls (PCBs) in environmental samples from the steel industry. The existing sample clean-up procedure, involving liquid chromatography on multi-layered silica and Florisil columns, has been extended to include a third chromatography stage on a basic alumina stationary phase. The additional clean-up stage is required for PCB analysis in order to eliminate interferences from relatively large concentrations of saturated cyclic and aliphatic hydrocarbons. Samples were analysed for WHO-12 congeners using high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) and standard solutions of the method US EPA 1668A. Replicate analysis of method blanks revealed background contamination for PCBs 118, 105 and 77, which are generally abundant in ambient air. These contaminants were taken into account using a subtraction method. The entire procedure was validated by replicate analysis (N = 3) of a certified reference sediment. The RSD for each WHO-12 congener was below 15%, 13C12-labelled PCB internal standard recoveries were in the range 70-95%. A waste dust sample collected in the electrostatic precipitator of a UK sinter plant was analysed for determination of PCDD/Fs and WHO-12 PCBs and exhibited a PCDD/F I-TEQ of 148.5 +/- 21.2 ngkg(-1) and a WHO-TEQ of 7.2 +/- 1.5 ngkg(-1). WHO-12 congeners contributed only 4.6% to the overall TEQ and PCB 126 was the major congener contributing to the WHO-TEQ (96%). The contribution to the overall TEQ of the waste dust sample was mainly attributed to PCDF followed by PCDD, which accounted for 86.6% and 8.7% to the overall TEQ, respectively.