UV–visible light-activated Ag-decorated,monodisperse TiO2 aggregates for treatment of the pharmaceutical oxytetracycline

Noble metal Ag-decorated, monodisperse TiO₂ aggregates were successfully synthesized by an ionic strength-assisted, simple sol–gel method and were used for the photocatalytic degradation of the antibiotic oxytetracycline (OTC) under both UV and visible light (UV–visible light) irradiation. The synthesized samples were characterized by X-ray diffraction analysis (XRD); UV–vis diffuse reflectance spectroscopy; environmental scanning electron microscopy (ESEM); transmission electron microscopy (TEM); high-resolution TEM (HR-TEM); micro-Raman, energy-dispersive X-ray spectroscopy (EDS); and inductively coupled plasma optical emission spectrometry (ICP-OES). The results showed that the uniformity of TiO₂ aggregates was finely tuned by the sol–gel method, and Ag was well decorated on the monodisperse TiO₂ aggregates. The absorption of the samples in the visible light region increased with increasing Ag loading that was proportional to the amount of Ag precursor added in the solution over the tested concentration range. The Brunauer, Emmett, and Teller (The BET) surface area slightly decreased with increasing Ag loading on the TiO₂ aggregates. Ag-decorated TiO₂ samples demonstrated enhanced photocatalytic activity for the degradation of OTC under UV–visible light illumination compared to that of pure TiO₂. The sample containing 1.9 wt% Ag showed the highest photocatalytic activity for the degradation of OTC under both UV–visible light and visible light illumination. During the experiments, the detected Ag leaching for the best TiO₂-Ag photocatalyst was much lower than the National Secondary Drinking Water Regulation for Ag limit (0.1 mg L^?1) issued by the US Environmental Protection Agency.     

Human health risk from Heavy metal via food crops consumption with wastewater irrigation practices in Pakistan

The current study was designed to investigate the potential human health risks associated with consumption of food crops contaminated with toxic heavy metals. Cadmium (Cd) concentration in surface soils; Cd, lead (Pb) and chromium (Cr) in the irrigation water and food crops were above permissible limits. The accumulation factor (AF) was >1 for manganese (Mn) and Pb in different food crops. The Health Risk Index (HRI) was >1 for Pb in all food crops irrigated with wastewater and tube well water. HRI >1 was also recorded for Cd in all selected vegetables; and for Mn in Spinacia oleracea irrigated with wastewater. All wastewater irrigated samples (soil and food crops) exhibited high relative contamination level as compared to samples irrigated with tube well water. Our results emphasized the need for pretreatment of wastewater and routine monitoring in order to avoid contamination of food crops from the wastewater irrigation system.     

Deterioration of water quality of Surma river

Surma River is polluted day by day by human activities, poor structured sewerage and drainage system, discharging industrial and household wastes. The charas (natural channels) are responsible for surface runoff conveyance from its urban catchments to the receiving Surma River. Water samples have been collected from a part of Surma River along different points and analyzed for various water quality parameters during dry and monsoon periods. Effects of industrial wastes, municipal sewage, and agricultural runoff on river water quality have been investigated. The study was conducted within the Chattak to Sunamganj portion of Surma River, which is significant due to the presence of two major industries – a paper mill and a cement factory. The other significant feature is the conveyors that travel from India to Chattak. The river was found to be highly turbid in the monsoon season. But BOD and fecal coliform concentration was found higher in the dry season. The water was found slightly acidic. The mean values of parameters were Conductivity 84–805 μs; DO: dry-5.52 mg/l, monsoon-5.72 mg/l; BOD: dry-1mg/l, monsoon-0.878 mg/l; Total Solid: dry-149.4 mg/l, monsoon-145.7 mg/l. In this study, an effort has been taken to investigate the status of concentration of phosphate (PO⁻⁴) and ammonia–nitrogen (NH₄–N) at four entrance points of Malnichara to the city, Guali chara, Gaviar khal and Bolramer khal. Data has been collected from March–April and September–October of 2004. Concentrations have been measured using UV Spectrophotometer. Although the phosphate concentration has been found within the limit set by DOE for fishing, irrigation and recreational purposes, however ammonia–nitrogen has been found to exceed the limit.     

Indoor exposure to respirable particulate matter and particulate-phase PAHs in rural homes in North India

In order to evaluate the exposure of the northern India rural population to polyaromatic hydrocarbon (PAH) inhalation, indoor pollution was assessed by collecting and analyzing the respirable particulate matter PM_2.5 and PM₁₀ in several homes of the village Bhithauli near Lucknow, UP. The home selection was determined by a survey. Given the nature of biomass used for cooking, homes were divided into two groups, one using all kinds of biomass and the second type using plant materials only. Indoor mean concentrations of PM_2.5 and associated PAHs during cooking ranged from 1.19 ± 0.29 to 2.38 ± 0.35 and 6.21 ± 1.54 to 12.43 ± 1.15 μg/m³, respectively. Similarly, PM₁₀ and total PAHs were in the range of 3.95 ± 1.21 to 8.81 ± 0.78 and 7.75 ± 1.42 to 15.77 ± 1.05 μg/m³, respectively. The pollutant levels during cooking were significantly higher compared to the noncooking period. The study confirmed that indoor pollution depends on the kind of biomass fuel used for cooking.     

Assessment of the sources of suspended particulate matter aerosol using US EPA PMF 3.0

The main purpose of this paper was to carry out a source apportionment of suspended particulate matter (SPM) samples using positive matrix factorization procedure. The central and local Government of Japan introduced strict emission regulations in 2002/10 and 2003/10, respectively, in curbing SPM pollution from major metropolitans. This paper also highlighted the impact of the measures taken by the central and local Government of Japan on the reduction of SPM and the contributions of sources. SPM samples were collected for 6 years starting from 1999 to 2005 at two sites, i.e., site A (urban) and site B (suburban) of Yokohama, Japan. Microwave digestion and inductively coupled plasma-mass spectroscopy (ICP-MS) were employed to measure Mg, Al, Ca, V, Cr, Mn, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Ag, Cd, Cs, Ba, Pb and Bi, while water soluble ions (Na⁺, NH₄  ⁺_{4}^{\ \,+}, K⁺, Ca^2 +, Mg^2 +, Cl⁻, NO₃  ^-_{3}^{\ \,-} and SO₄  ^2-)_{4}^{\ \,2-}) as well as carbonaceous mass (EC and OC) were analyzed using ion chromatograph and CHN analyzer, respectively. The sources identified at two sites were automobile, soil dust, marine aerosol, mixed sources, and secondarily formed aerosol. Also, source quantification was performed. Automobile and soil dust were striking contributors at site A. Automobile and soil dust of SPM aerosol might be produced from local origin at current study areas. Besides, Asian dust had an impact on high concentrations of SPM aerosol in some certain period of the year due to the outflows of East Asian emission. In contrast, secondary aerosol in the form of sulfate and ammonium as well as mixed sources (coal, long-transported Cs, and other unknown sources) were remarkable at site B. Stationary/industrial combustion has apparently more impact on the release of SPM components at site B than A. Automobile regulations in 2002 and 2003, respectively, resulted in reduction of SPM by 28% for site A and 16% for site B. There was also net reduction of automobile contribution at both sites due to the above measures being implemented.     

Induction of sperm impairments in mice as a sensitive biomarker of arsenic toxicity

The ubiquitous presence of arsenic (a toxic metalloid) in our environment, particularly in our drinking water, is a serious health hazard of global concern. The present work deals with the assessment of arsenic toxicity through the analysis of induced sperm impairments in sperm head morphology and sperm count in mice at low exposures compared to the magnitude of response at high exposure levels. The animals were exposed to four doses of arsenic, ranging from lowest dose of 0.3 μg kg^?1 day^?1 (the human reference dose) to higher dose of 30 μg kg^?1 day^?1 for 15 consecutive days. The epididymal sperms were harvested after one spermatogenic cycle on the 36th day and were scored for the presence of any abnormality in their head morphology as well as changes in their count. Exposure to arsenic significantly induced, in a dose-dependent manner, increases in the frequency of sperms with abnormal head morphology from 5.12 % in control to 9.23 % in lowest dose group and 23.02 % in highest dose group. In contrast, the mean sperm counts in the epididymal wash were decreased from 6.05 million per milliliter in the control to 4.95 million per milliliter in the lowest dose group and 3.07 million in the highest dose group. The analysis of sperm impairments in mice was, therefore, found to be a highly sensitive assay to assess arsenic toxicity, exhibiting a marked male reprotoxic effect of arsenic even at its low exposure levels including the human reference dose.     

Urban Water Supply Strategies for Hyderabad, India – Future Scenarios

To keep pace with population and economic growth, the city of Hyderabad, India, will need to identify and develop new supply sources almost continually. Increasing population growth rate, declining surface water resources, overexploitation of groundwater, deterioration of ground water quality and poor sewage treatment are the major water-related issues in Hyderabad. This paper reviews the current situation facing policy makers who need to come to terms with the problem of restricted water supply and increasing demand in an urban centre such as Hyderabad, India. The City Water Balance model developed in this study can be used to analyse different scenarios that include water conservation, urban wastewater reuse and improvement of distribution and conveyance efficiency. Water conservation programs, which include a 5% conveyance efficiency improvement, reusing 90 million cubic metres (MCM) of urban runoff and adoption of water harvesting by 0.5 million households together with recycling 120 MCM of wastewater recycling wastewater would be sufficient to meet the water demand by 2031, if the population grows at a rate of 2.5%.     

Driving Forces for the Marsh Wetland Degradation in the Honghe National Nature Reserve in Sanjiang Plain, Northeast China

In the study, we analyze and assess quantitatively the spatial pattern of vegetation and its ecological degradation information in the Honghe National Nature Reserve (HNNR), a Ramsar-designated site in Northeast China. Statistics from historical survey data are used to measure the degradation of marshes over time and changes in the hydrological regime. Long-term statistical data are also employed to analyze both natural and human impacts on these changes. Both the wetland degradation model and its mechanisms are discussed in this paper. The research finds that the loss of water and other types of degradation in the vegetation habitat caused by the rapid deterioration of the hydrological regime has threatened the status of HNNR as a “storage area of natural genes.” Scientifically constructed strategies are urgently required to ensure sustainable economic benefits that do not adversely affect this nature reserve.     

Nitrate and ammonium ions removal from groundwater by a hybrid system of zero-valent iron combined with adsorbents

Nitrate (NO(3)(-)) is a commonly found contaminant in groundwater and surface water. It has created a major water quality problem worldwide. The laboratory batch experiments were conducted to investigate the feasibility of HCl-treated zero-valent iron (Fe(0)) combined with different adsorbents as hybrid systems for simultaneous removal of nitrate (NO(3)(-)) and ammonium (NH(4)(+)) ions from aqueous solution. The maximum NO(3)(-) removal in combined Fe(0)-granular activated carbon (GAC), Fe(0)-filtralite and Fe(0)-sepiolite systems was 86, 96 and 99%, respectively, at 45 °C for 24 h reaction time. The NO(3)(-) removal rate increased with the increase in initial NO(3)(-) concentration. The NO(3)(-) removal efficiency by hybrid systems was in the order of sepiolite > filtralite > GAC. The NH(4)(+) produced during the denitrification process by Fe(0) was successfully removed by the adsorbents, with the removal efficiency in the order of GAC > sepiolite > filtralite. Results of the present study suggest that the use of a hybrid system could be a promising technology for achieving simultaneous removal of NO(3)(-) and NH(4)(+) ions from aqueous solution.     

Effect of mercury and arsenic from industrial effluents on the drinking water and comparison of the water quality of polluted and non-polluted areas: a case study of Peshawar and Lower Dir

The purpose of the present study was to find out the sources of mercury and arsenic pollution of water in the industrial area of Peshawar, the capital of Khyber Pakhtunkhwa, Pakistan. Samples of effluents, mud, and water were collected from the target area (industrial area of Peshawar), the area of water supply source, and from the less polluted area, the Lower Dir district, as the control. Hg was determined by the cold vapor generation technique, while arsenic was determined using the electrothermal atomic absorption technique. Data of the water from the industrial area were compared with that of the source area, control area, as well as with the WHO and some international drinking water quality standards. The results show that some parameters, i.e., TDS, DO, pH, and hardness, were more than the permissible limits. Textile and glass industries were found to be the major sources of Hg and As pollution. Downstream dilution of these contaminants was also observed.