Coastal Langmuir circulations induce phase-locked modulation of bathymetric stress

Environmental Fluid Mechanics - The ocean boundary layer (OBL) is forced by atmosphere-ocean and sea ice-ocean momentum fluxes, wave dynamics, and buoyancy; in coastal zones, OBL dynamics are...     

Photolysis of oxyfluorfen in aqueous methanol

Photolysis of oxyfluorfen, an herbicide of the nitrodiphenyl ether class, was studied in aqueous methanol under UV and sunlight. UV irradiation was carried out in a borosilicate glass photoreactor (containing 250 ppm oxyfluorfen in 50% aqueous methanol) equipped with a quartz filter and 125 watt mercury lamp (maximum output 254 nm) at 25 ± 1°C. Sunlight irradiation was conducted at 28 ± 1°C in borosilicate Erlenmeyer flasks containing 250 ppm oxyfluorfen in 50% aqueous methanol. The samples from both the irradiated conditions were withdrawn at a definite time interval and extracted to measure oxyfluorfen content by gas chromatography-flame ionization detector for rate study. The half-life values were 20 hours and 2.7 days under UV and sunlight exposure, respectively. Photolysis of oxyfluorfen yielded 13 photoproducts of which three were characterized by infrared spectrophotometer and ¹H NMR and ¹³C NMR spectroscopy. The rest of the photoproducts were identified by gas chromatography-mass spectrometry (GC-MS) and thin layer chromatography (TLC). An ionization potential 70 eV was used for electron impact-mass spectrometry (EI-MS) and methane was used as reagent gas for chemical ionization-mass spectrometry (CI-MS). Two of the photoproducts were also synthesized for comparison. The main phototransformation pathways of oxyfluorfen involved nitro reduction, dechlorination, and hydrolysis as well as nucleophiles displacement reaction.     

Physiological and chemical response of the lichen, Flavoparmelia caperata (L.) Hale, to the urban environment of Kolkata, India

The present study was focused on the effect of increasing urbanization including industrial and traffic activity on the accumulation of heavy metals and possible damage of selected physiological parameters (composition of assimilation pigments, membrane lipid peroxidation, and membrane integrity) of an epiphytic foliose lichen, Flavoparmelia caperata (L.) Hale. The lichen samples were collected from three different localities in and around Kolkata, India, two sites being from the urban area and one from the relatively non-polluted sub-urban area. The results showed that thalli from the urban sites have significantly higher concentrations of Fe, Cr, Cu, Zn, and Pb compared to those collected from the sub-urban site. Physiological parameters of damage also exhibited stress symptoms in thalli from the urban sites—decreased chlorophyll a indicating less photosynthetic efficiency, and increase in lipid peroxidation and electrolyte conductivity indicating cell membrane injuries. Correlation studies among metals pinpointed vehicular traffic as the main source of pollution in this area.     

Assessment of the impact of pesticide residues on microbiological and biochemical parameters of tea garden soils in India

The main aim of this study was to assess the impact of pesticidal residues on soil microbial and biochemical parameters of the tea garden soils. The microbial biomass carbon (MBC), basal (BSR) and substrate induced respirations (SIR), β -glucosidase activity and fluorescein diacetate hydrolyzing activity (FDHA) of six tea garden soils, along with two adjacent forest soils (control) in West Bengal, India were measured. The biomass and its activities and biochemical parameters were generally lower in the tea garden soils than the control soils. The MBC of the soils ranged from 295.5 to 767.5 μ g g^{? 1}. The BSR and SIR ranged from 1.65 to 3.08 μ g CO₂-C g^{? 1} soil h^{? 1} and 3.08 to 10.76 μ g CO₂-C g^{? 1}h^{? 1} respectively. The β -glucosidase and FDHA of the soils varied from 33.3 and 76.3 μ g para-nitrophenol g^{? 1} soil h^{? 1} and 60.5 to 173.5 μ g fluorescein g^{? 1}h^{? 1}respectively. The tea garden soils contained variable residues of organophosphorus and organochlorine pesticides, which negatively affected the MBC, BSR, SIR, FDHA and β -glucosidase activity. Ethion and chlorpyriphos pesticide residues in all the tea garden soils varied from 5.00 to 527.8 ppb and 17.6 to 478.1 ppb respectively. The α endosulfan, β endosulfan and endosulfan sulfate pesticide residues in the tea garden soils ranged from 7.40 to 81.40 ppb, 8.50 to 256.1 ppb and 55 to 95.9 ppb respectively. Canonical correlation analysis shows that 93% of the total variation was associated with the negative impact of chlorpyriphos, β and α endosulfan and endosulfan sulfate on MBC, BSR and FDHA. At the same time ethion had negative impact on SIR and β -glucosidase. Data demonstrated that the pesticide residues had a strong impact on the microbial and biochemical components of soil quality.     

Effects of unregulated anthropogenic activities on mixing ratios of volatile organic air pollutants—A case study

During the months of October to November, many important festivals are celebrated in India. Celebration of these festivals are marked by extensive use of fireworks or pyrotechnics, bonfire, incense burning, open air community cooking, and temporary eateries using crude fuel such as coal, wood, kerosene, cow dung, burning of raw/semiwood, and coconut shells. The present study deals with the influence of these unregulated anthropogenic activities on ambient mixing level of volatile organic compounds (VOCs), especially some carbonyl compounds. The study was undertaken in the metropolitan city of Kolkata, India, with very high population density, which is even higher during festival period. The average total carbonyl level at different sites in Kolkata varied from 134.8 to 516.5 μg m^?3 in pre-festival season, whereas in post-festival season the same varied from 252.2 to 589.3 μg m^?3. Formaldehyde to acetaldehyde ratio altered from 0.62 in pre-festival season to 1.78 in post-festival season. Diurnal variation also altered, indicating variation in source composition of carbonyls. The total ozone forming potential calculated for all 14 carbonyls in pre-festival season increased by 35% in post-festival season. The effect of anthropogenic activities typical to the event of Diwali night characterized by intense execution of pyrotechnics resulted in significantly high level of carbonyl VOCs. Principal component analysis study for the event of Diwali shows clear contribution of the event on certain carbonyl VOCs. The results indicate elevated primary emissions of these pollutants and also their effect on formation of secondary pollutants. The study emphasizes the need of generating awareness among the communities in society as well as need for regulations to minimize the emissions and related hazards to the extent possible.

Implications: Altered anthropogenic activities typical of festival season including extensive use of pyrotechnics affect ambient level of volatile organic compounds, especially some carbonyls. Such activities have considerable effect on interspecies ratio and diurnal variation. They also affect formation of secondary pollutants such as tropospheric ozone. Principal component analysis (PCA) study shows clear contribution of the pyrotechnics execution on certain carbonyl VOCs. The findings emphasize the need of generating awareness in society and need for regulations to minimize the emissions.     

L-asparaginase and L-glutaminase activities in submerged rice soil amended with municipal solid waste compost and decomposed cow manure

The field study was conducted to evaluate the effect of municipal solid waste compost (MSWC) as a soil amendment on L-asparaginase (LA) and L-glutaminase (LG) activities. Experiments were conducted during the wet seasons of 1997, 1998 and 1999 on rice grown under a submerged condition, at the Agriculture Experimental Farm, Calcutta University at Baruipur, West Bengal, India. The treatments consisted of control, no input; MSWC, at 60 Kg N ha(- 1); well-decomposed cow manure (DCM), at 60 Kg N ha(- 1); MSWC (30 Kg N ha(- 1)) + Urea (U) (30 Kg N ha(- 1)); DCM (30 Kg N ha(- 1)) + U (30 Kg N ha(- 1)) and Fertilizer, (at 60:30:30 NPK kg ha(- 1)) through urea, single superphosphate and muriate of potash respectively). LA and LG activities alone and their ratio with organic-C (ratio index value, RIV), straw and grain yield were higher in DCM than MSWC-treated soils, due to higher amount of biogenic organic materials like water-soluble organic carbon, carbohydrate and mineralizable nitrogen in the former. The studied parameters were higher when urea was integrated with DCM or MSWC, compared to their single applications. The heavy metals in MSWC did not detrimentally influence the above-measured activities of soil. In the event of long term MSWC application, changes in soil quality parameters should be monitored regularly, since heavy metals once entering into soil persist over a long period.     

Effect of co-culturing of methanogens with sulphur-reducing bacteria on biomethanation

Biomethanation as a result of co-culturing methanogenic bacteria with sulphate-reducing bacteria was studied under anoxic conditions. Toxic sulphur compounds are known not to inhibit methanogenesis. Hence varying experimental conditions can lead to the optimum conditions for biomethanation. Under controlled experimental conditions, the interacting behaviour of both isolated methanogens and sulphate reducers show interesting features, viz. allelopathy.     

Profenofos induced modulation in physiological indices,genomic template stability and protein banding patterns of Anabaena sp. PCC 7120

To understand the mechanism underlying organophosphate pesticide toxicity, cyanobacterium Anabaena PCC 7120 was subjected to varied concentrations (0, 5, 10, 20 and 30 mg L^?1) of profenofos and the effects were investigated in terms of changes in cellular physiology, genomic template stability and protein expression pattern. The supplementation of profenofos reduced the growth, total pigment content and photosynthetic efficiency of the test organism in a dose dependent manner with maximum toxic effect at 30 mg L^?1. The high fluorescence intensity of 2′, 7′ –dichlorofluorescin diacetate and increased production of malondialdehyde confirmed the prevalence of acute oxidative stress condition inside the cells of the cyanobacterium. Rapid amplified polymorphic DNA (RAPD) fingerprinting and SDS-PAGE analyses showed a significant alteration in the banding patterns of DNA and proteins respectively. A marked increase in superoxide dismutase, catalase, peroxidase activity and a concomitant reduction in glutathione content indicated their possible role in supporting the growth of Anabaena 7120 up to 20 mg L^?1. These findings suggest that the uncontrolled use of profenofos in the agricultural fields may not only lead to the destruction of the cyanobacterial population, but it would also disturb the nutrient dynamics and energy flow.     

A review on the production of fermentable sugars from lignocellulosic biomass through conventional and enzymatic route—a comparison

The scarcity of fossil fuels has urged the economically developed countries to find the resources for an alternative energy sources. In apprehension to this, biofuels, like bioethanol and biobutanol, produced from lignocellulosic biomass were considered as potential alternative. There are several methods for the pretreatment of biomass before it is being used as a feedstock for the production of fermentable sugars. However, one of the crucial concerns here is to enumerate an economic pretreatment scheme that can be implemented in large scale for the production of mostly exposed cellulosic part from biomass. This will ensure an effective hydrolysis of cellulose for the production of fermentable sugars and the production of biobutanol from these derived sugars. Moreover, the keynote understanding of an effective fermentation is the production of less inhibitory compounds like furfural, hydroxymethyl furfural during the hydrolysis of cellulose. Enzymatic hydrolysis of cellulose was reported as the most efficient method is this aspect. Trichoderma sp. was found the mostly used resources for the enzyme called cellulase and Aspergillus sp. for hemicellulase enzymes. The most crucial part here is the isolation of proper enzyme that will increase the rate of hydrolysis. Moreover, selection of proper pretreatment process will be a key benefit to the production of fermentable sugars through enzymatic hydrolysis. Based on the biomass nature, the evaluated hot water pretreatment followed by enzymatic hydrolysis with a provision of enzyme reusability (like encapsulated or enzyme separation with membrane) seems to be promising for enhanced biofuel-production.     

A comparative study of removal of fluoride from contaminated water using shale collected from different coal mines in India

Low-cost water defluoridation technique is one of the most important issues throughout the world. In the present study, shale, a coal mine waste, is employed as novel and low-cost adsorbent to abate fluoride from simulated solution. Shale samples were collected from Mahabir colliery (MBS) and Sonepur Bazari colliery (SBS) of Raniganj coalfield in West Bengal, India, and used to remove fluoride. To increase the adsorption efficiency, shale samples were heat activated at a higher temperature and samples obtained at 550 °C are denoted as heat-activated Mahabir colliery shale (HAMBS₅₅₀) and heat-activated Sonepur Bazari colliery shale (HASBS₅₅₀), respectively. To prove the fluoride adsorption onto different shale samples and ascertain its mechanism, natural shale samples, heat-activated shale samples, and their fluoride-loaded forms were characterized using scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction study, and Fourier transform infrared spectroscopy. The effect of different parameters such as pH, adsorbent dose, size of particles, and initial concentration of fluoride was investigated during fluoride removal in a batch contactor. Lower pH shows better adsorption in batch study, but it is acidic in nature and not suitable for direct consumption. However, increase of pH of the solution from 3.2 to 6.8 and 7.2 during fluoride removal process with HAMBS₅₅₀ and HASBS₅₅₀, respectively, confirms the applicability of the treated water for domestic purposes. HAMBS₅₅₀ and HASBS₅₅₀ show maximum removal of 88.3 and 88.5 %, respectively, at initial fluoride concentration of 10 mg/L, pH 3, and adsorbent dose of 70 g/L.