Patterns of selectiveness in the Amazonian freshwater fisheries: implications for management

Tropical fisheries, which are considered multi-species, may show selectiveness. We analyzed the degree of selectivity of fish catches in 46 sites along the Amazon basin through the percentage of biomass corresponding to the most caught fish species. Amazonian fisheries were considered moderately selective, as 54% of the sites directed more than a quarter of fishing effort to one fish species and in 87% of the sites more than half the fishing effort was directed to five fish species. Commercial fisheries were more selective than subsistence fisheries. Eleven fish species (nine of them migratory) have received more fishing pressure in the studied Amazonian regions and the catch composition differed among regions. We thus recommend that fisheries management in the Amazon basin should distribute fishing effort among more fish species; incorporate the particularities of commercial and subsistence fisheries; evaluate fishing effects on ecosystem services; and consider the biological characteristics of preferred fish.     

Fully Bio-Sourced Nylon 11/Raw Lignin Composites: Thermal and Mechanical Performances

Ecofriendly fully bio-composites based on polyamide 11 (PA11) and lignin have been prepared on the entire concentration range using a twin-screw extruder. In this work, PA11 was blended with lignin by direct extrusion technology without any chemical pre- or in-situ- modifications or physical pretreatments. The presence of various organic and inorganic impurities in the selected technical lignin have been maintained. The incorporation of this cheap renewable material from biomass in bio-based PA11 was inspected by an array of characterization tools. Also, the effect of the presence of lignin on the morphology and on the mechanical properties of the resulting materials was examined. Finally, in-situ investigation of structural evolution in PA11 induced by the presence of lignin was analyzed by Fast Scanning Chip Calorimetry.     

The Effect of Silane Treated Fibre Loading on Mechanical Properties of Pineapple Leaf/Kenaf Fibre Filler Phenolic Composites

The aim of the present study is to investigate mechanical and morphological properties of pineapple leaf fibres (PALF) reinforced phenolic composites and its comparison with kenaf fibre (KF)/phenolic composites. Mechanical properties (tensile, flexural and impact) of untreated and treated PALF phenolic composites at different fibre loading were investigated. Tensile, flexural and impact properties of PALF and kenaf/phenolic composites were analyzed as per ASTM standard. Morphological analysis of tensile fracture samples of composites was carried out by scanning electron microscopy. Obtained results indicated that treated PALF/phenolic composites at 50% PALF loading exhibited better tensile, flexural and impact properties as compared to other untreated PALF/phenolic composites. Treated kenaf/phenolic composites at 50% fibre loading showed better tensile, flexural and impact properties than untreated kenaf/phenolic composite. It is concluded that treated 50% fibre loading kenaf and PALF/phenolic composites showed better mechanical properties than untreated kenaf and PALF/phenolic composites due to good fibre/matrix interfacial bonding. Results obtained in this study will be used for the further study on hybridization of PALF and KF based phenolic composites.     

Fly ash from biomass combustion as replacement raw material and its influence on the mortars durability

Journal of Material Cycles and Waste Management - Several types of industrial solid waste have been used as byproducts in the construction and materials industries. Some of the applications seem to...     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

Vermicomposting as an advanced biological treatment for industrial waste from the leather industry

The leather industry (tanneries) generates high amounts of toxic wastes, including solid and liquid effluents that are rich in organic matter and mineral content. Vermicomposting was studied as an alternative method of treating the wastes from tanneries. Vermicompost was produced from the following tannery residues: tanned chips of wet-blue leather, sludge from a liquid residue treatment station, and a mixture of both. Five hundred earthworms (Eisenia fetida) were added to each barrel. During the following 135 days the following parameters were evaluated: pH, total organic carbon (TOC), organic matter (OM), cation exchange capacity (CEC), C:N ratio, and chromium content as Cr (III) and Cr (VI). The results for pH, TOC and OM contents showed decreases in their values during the composting process, whereas values for CEC and total nitrogen rose, indicating that the vermicompost reached maturity. For chromium, at 135 days, all values of Cr (VI) were below the detectable level. Therefore, the Cr (VI) content had probably been biologically transformed into Cr (III), confirming the use of this technique as an advanced biological treatment. The study reinforces the idea that vermicomposting could be introduced as an effective technology for the treatment of industrial tannery waste and the production of agricultural inputs.     

Reviving wood-pastures for biodiversity and people: A case study from western Estonia

Wood-pastures are associated with high cultural and biodiversity values in Europe. However, due to their relatively low productivity, large areas of wood-pastures have been lost over the last century. In some areas, incentive schemes have been developed to revive wood-pastures. We investigated the effects of one such scheme in western Estonia. We compared the structure of grazed wood-pastures (old and restored) to those of abandoned wood-pastures and ungrazed forest stands to explore the effects of management, and conducted interviews with 24 farmers to investigate their motivations to carry out the management. We found a positive influence of active management on the semi-open structure of wood-pastures. Financial support was vital for management, but personal values related to tradition also played an important role. The interviewees differed widely in their range of motivations, suggesting that other strategies in addition to financial incentives would further improve the management of wood-pastures in the region.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-015-0719-8) contains supplementary material, which is available to authorized users.