Impact of a proposed revision of the IESTI equation on the acute risk assessment conducted when setting maximum residue levels (MRLs) in the European Union (EU): A case study

ABSTRACT

Proposals to update the methodology for the international estimated short-term intake (IESTI) equations were made during an international workshop held in Geneva in 2015. Changes to several parameters of the current four IESTI equations (cases 1, 2a, 2b, and 3) were proposed. In this study, the overall impact of these proposed changes on estimates of short-term exposure was studied using the large portion data available in the European Food Safety Authority PRIMo model and the residue data submitted in the framework of the European Maximum Residue Levels (MRL) review under Article 12 of Regulation (EC) No 396/2005. Evaluation of consumer exposure using the current and proposed equations resulted in substantial differences in the exposure estimates; however, there were no significant changes regarding the number of accepted MRLs. For the different IESTI cases, the median ratio of the new versus the current equation is 1.1 for case 1, 1.4 for case 2a, 0.75 for case 2b, and 1 for case 3. The impact, expressed as a shift in the IESTI distribution profile, indicated that the 95th percentile IESTI shifted from 50% of the acute reference dose (ARfD) with the current equations to 65% of the ARfD with the proposed equations. This IESTI increase resulted in the loss of 1.2% of the MRLs (37 out of 3110) tested within this study. At the same time, the proposed equations would have allowed 0.4% of the MRLs (14 out of 3110) that were rejected with the current equations to be accepted. The commodity groups that were most impacted by these modifications are solanacea (e.g., potato, eggplant), lettuces, pulses (dry), leafy brassica (e.g., kale, Chinese cabbage), and pome fruits. The active substances that were most affected were fluazifop-p-butyl, deltamethrin, and lambda-cyhalothrin.     

The relative importance of subjective and structural factors for individual adaptation to climate change by forest owners in Sweden

A growing body of literature argues that subjective factors can more accurately explain individual adaptation to climate change than objective measurers of adaptive capacity. Recent studies have shown that personal belief in climate change and affect are much better in explaining climate awareness and action than income, education or gender. This study focuses on the process of individual adaptation to climate change. It assesses and compares the influence of cognitive, experiential and structural factors on individuals’ views and intentions regarding climate change adaptation. Data from this study comes from a survey with 836 forest owners in Sweden. Ordinal and binary logistic regression was used to test hypotheses about the different factors. Results show that cognitive factors—namely personal level of trust in climate science, belief in the salience of climate change and risk assessment—are the only statistically significant factors that can directly explain individuals’ intention to adapt to climate change and their sense of urgency. Findings also suggest that structural or socio-demographic factors do not have a statistically significant influence on adaptation decision-making among Swedish forest owners. The study also offers valuable insights for communication interventions to promote adaptation. Findings strongly suggest that communication interventions should focus more strongly on building trust and addressing stakeholders’ individual needs and experiences.

     

Remediation techniques for mitigating vapor intrusion from sewer systems to indoor air

Investigations at former dry cleaning sites in Denmark show that sewer systems often are a major vapor intrusion pathway for chlorinated solvents to indoor air. In more than 20 percent of the contaminated drycleaner sites in Central Denmark Region, sewer systems were determined to be a major vapor intrusion pathway. Sewer systems can be a major intrusion pathway if contaminated groundwater intrudes into the sewer and contamination is transported within the sewer pipe by water flow in either free phase or dissolved states. Additionally, the contamination can volatilize from the water phase or soil gas can intrude the sewer system directly. In the sewer, the gas phase can migrate in any direction by convective transport or diffusion. Indications of the sewer as a major intrusion pathway are:

• higher concentrations in the upper floors in buildings,
• higher concentrations in indoor air than expected from soil gas measurements,
• higher concentrations in bathrooms/kitchen than in living rooms,
• chlorinated solvents in the sewer system, and
• a pressure gradient from the sewer system to indoor air.

Measurements to detect whether or not the sewer system is an intrusion pathway are simple. In Central Denmark Region, the concentrations of contaminants are routinely measured in the indoor air at all floors, the outdoor air, behind the water traps in the building, and in the manholes close to the building. The indoor and outdoor air concentration, as well as concentrations in manholes, are measured by passive sampling on sorbent samplers over a 14‐day period, and the measurements inside the sewer system are carried out by active sampling using carbon tubes (sorbent samplers). Furthermore, the pressure gradient over the building slab and between the indoor air and the sewer system are also measured. A simple test is depressurization of the sewer system. Using this technique, the pressure gradient between the sewer system and the indoor air is altered toward the sewer system—the contamination cannot enter the indoor air through the sewer system. If the sewer system is a major intrusion pathway, the effect of the test can be observed immediately in the indoor air. Remediation of a sewer transported contamination can be:

• prevention of the contaminants from intruding into the sewer system or
• prevention of the contaminated gas in the sewer system from intruding into the indoor air.

Remediation techniques include the following:

• lining of the sewer piping to prevent the contamination from intruding into the sewer;
• sealing the sewer system in the building to prevent the contamination from the sewer system to intrude the indoor air;
• venting of manholes; and
• depressurizing the sewer system.

     

Building pressure control test to examine if VOC contamination in indoor air is caused by an interior source or by a subslab source

When determining whether or not remediation of subslab contamination is warranted, it is often important to know if the presence of volatile organic compounds (VOCs) in indoor air is caused primarily by interior sources, or primarily by subslab contamination. With a Building Pressure Control test, the pressure differential across the building envelope and, thereby, also the pressure differential across the slab, can be controlled by a blower. By measuring the indoor air concentrations of VOCs under depressurization (upward pressure gradient over the slab) and under pressurization (downward pressure gradient over the slab), it can be determined if the subslab contamination contributes significantly to the VOC concentrations in indoor air. This technique has been applied at several sites in the Central Denmark Region, and the results show that a Building Pressure Control test is a quick and effective method to examine if VOC contamination in indoor air is caused primarily by interior sources or primarily by subslab sources. With numerous measurement points in the indoor air, at some sites this test method has identified the area where the subslab contamination is located. A pressure differential at ?5/+5 Pa across the building envelope was sufficient at all the test sites to control the pressure gradient across the slab to be uniquely upward/downward.     

Exposure to inhalable dust and endotoxin among Danish livestock farmers: results from the SUS cohort study

Studies on personal dust and endotoxin concentrations among animal farmers have been either small or limited to a few sectors in their investigations. The present study aimed to provide comparable information on the levels and variability of exposure to personal dust and endotoxin in different types of animal farmers. 507 personal inhalable dust samples were collected from 327 farmers employed in 54 pig, 26 dairy, 3 poultry, and 3 mink farms in Denmark. Measurements in pig and dairy farmers were full-shift and performed during summer and winter, while poultry and mink farmers were monitored during 4 well-defined production stages. The collected samples were measured for dust gravimetrically and analyzed for endotoxin by the Limulus amebocyte lysate assay. Simple statistics and random-effect analysis were used to describe the levels and the variability in measured dust and endotoxin exposure concentrations. Measured inhalable dust levels had an overall geometric mean of 2.5 mg m(-3) (range 相似文献   

Uptake of 17β-estradiol and biomarker responses in brown trout (Salmo trutta) exposed to pulses

In streams, chemicals such as 17β-estradiol (E2) are likely to occur in pulses. We investigated uptake and biomarker responses in juvenile brown trout (Salmo trutta) of 3- or 6-h pulses of concentrations up to 370 ng E2 L⁻¹. Uptake by the fish was estimated from disappearance of E2 from tank water. A single 6-h pulse of 370 ng E2 L⁻¹ increased the plasma vitellogenin concentration, liver Erα- and vitellogenin-mRNA. Exposure to 150-160 ng E2 L⁻¹ for 6 h increased vitellogenin in one experiment but not in another. Two 6-h pulses had a larger effect one pulse. Brown trout in the size range 24-74 g took up E2 linearly with time and exposure concentration with a concentration ratio rate of 20.2 h⁻¹. In conclusion, the threshold for induction of estrogenic effects in juvenile brown trout at short term pulse exposure appears to be in the range 150-200 ng E2 L⁻¹.     

Analysis of currently available data for characterising the risk of engineered nanomaterials to the environment and human health--lessons learned from four case studies

Production volumes and the use of engineered nanomaterials in many innovative products are continuously increasing, however little is known about their potential risk for the environment and human health. We have reviewed publicly available hazard and exposure data for both, the environment and human health and attempted to carry out a basic risk assessment appraisal for four types of nanomaterials: fullerenes, carbon nanotubes, metals, and metal oxides (ENRHES project 2009(1)). This paper presents a summary of the results of the basic environmental and human health risk assessments of these case studies, highlighting the cross cutting issues and conclusions about fate and behaviour, exposure, hazard and methodological considerations. The risk assessment methodology being the basis for our case studies was that of a regulatory risk assessment under REACH (ECHA, 2008(2)), with modifications to adapt to the limited available data. If possible, environmental no-effect concentrations and human no-effect levels were established from relevant studies by applying assessment factors in line with the REACH guidance and compared to available exposure data to discuss possible risks. When the data did not allow a quantitative assessment, the risk was assessed qualitatively, e.g. for the environment by evaluating the information in the literature to describe the potential to enter the environment and to reach the potential ecological targets. Results indicate that the main risk for the environment is expected from metals and metal oxides, especially for algae and Daphnia, due to exposure to both, particles and ions. The main risks for human health may arise from chronic occupational inhalation exposure, especially during the activities of high particle release and uncontrolled exposure. The information on consumer and environmental exposure of humans is too scarce to attempt a quantitative risk characterisation. It is recognised that the currently available database for both, hazard and exposure is limited and there are high uncertainties in any conclusion on a possible risk. The results should therefore not be used for any regulatory decision making. Likewise, it is recognised that the REACH guidance was developed without considering the specific behaviour and the mode of action of nanomaterials and further work in the generation of data but also in the development of methodologies is required.     

Detecting Density Dependence in Recovering Seal Populations

Time series of abundance estimates are commonly used for analyses of population trends and possible shifts in growth rate. We investigate if trends in age composition can be used as an alternative to abundance estimates for detection of decelerated population growth. Both methods were tested under two forms of density dependence and different levels of environmental variation in simulated time series of growth in Baltic gray seals. Under logistic growth, decelerating growth could be statistically confirmed after 16 years based on population counts and 14 years based on age composition. When density dependence sets in first at larger population sizes, the age composition method performed dramatically better than population counts, and a decline could be detected after 4 years (versus 10 years). Consequently, age composition analysis provides a complementary method to detect density dependence, particularly in populations where density dependence sets in late.     

Avoidance behaviour of Eisenia fetida to carbofuran, chlorpyrifos, mancozeb and metamidophos in natural soils from the highlands of Colombia

Earthworm avoidance behaviour test is an important screening tool in soil eco-toxicology. This test has been developed and validated under North American and European conditions. However, little research has been performed on the avoidance test in the tropics. This work demonstrates the potential suitability of the avoidance behaviour test as screening method in the highlands of Colombia using Eisenia fetida as the bio-indicator species on contaminated soils with carbofuran and chlorpyrifos. Though for the two active ingredients 100% avoidance was not reached, a curve with six meaningful concentrations is provided. No significant avoidance behaviour trend was found for mancozeb and methamidophos. Tests were conducted in the field yielded similar results to the tests carried out in the laboratory for chlorpyrifos and mancozeb. However, for the case of carbofuran and methamidophos, differences of more than double in avoidance were obtained. Divergence might be explained by soil and temperature conditions.     

Atmospheric deposition, retention, and stream export of dioxins and PCBs in a pristine boreal catchment

The mass-balance between diffuse atmospheric deposition of organic pollutants, amount of pollutants retained by the terrestrial environment, and levels of pollutants released to surface stream waters was studied in a pristine northern boreal catchment. This was done by comparing the input of atmospheric deposition of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) and PCBs with the amounts exported to surface waters. Two types of deposition samplers were used, equipped with a glass fibre thimble and an Amberlite sampler respectively. The measured fluxes showed clear seasonality, with most of the input and export occurring during winter and spring flood, respectively. The mass balance calculations indicates that the boreal landscape is an effective sink for PCDD/Fs and PCBs, as 96.0-99.9 % of received bulk deposition was retained, suggesting that organic pollutants will continue to impact stream water in the region for an extended period of time.