EVAPOTRANSPIRATION FROM FLORIDA PONDCYPRESS SWAMPS1

ABSTRACT: We measured diurnal changes in water levels in three swamps dominated by pondcypress trees (Taxodium distichum var. nuans) in central Florida for four years in order to obtain additional documentation of relatively low evapotranspiration (ET) rates. Two of these swamps were monitored for another three years after one of them was clearcut. Estimated annual ET from undisturbed cypress swamps varied from 38 cm/yr to 86 cm/yr, averaging 60 cm (not including interception). Faster ET rates may have been related to faster pondcypress growth rates, a greater proportion of hardwoods in the canopy, and clearcutting in the surrounding pine plantation. The average ET rate was considerably lower than ET rates that have been estimated for north Florida pine plantations. However, incorporating estimates of interception indicates that overall ET rates in pondcypress swamps may be only slightly lower than ET from pine plantations. ET decreased only 5 percent in one swamp after it was clearcut, indicating that this management practice is not likely to affect regional water balances.     

Sorption of polycyclic aromatic compounds to humic and fulvic acid HPLC column materials

Two different humic acids (HA) and a fulvic acid (FA) were chemically immobilized to a high performance liquid chromatography (HPLC) silica column material. The immobilization was performed by binding amino groups in HA/FA to the free aldehyde group in glutardialdehyde attached to the silica gel. The HPLC column materials were compared with a blank column material made by applying the same procedure but without immobilizing HA or FA. Also, a column was made by binding carbonyl groups in HA to amino groups attached to the silica gel. The humic substances were selected to secure appropriate variation of their structural features. The retention factors of 45 polycyclic aromatic compounds (PAC) to the four columns were determined by HPLC. The advantage of the technique is a large number of compounds can easily be studied. The binding procedure does not appear to cause a drastic selection between the HA molecules. The k' values obtained for the two Aldrich HA columns agree in general reasonably. The retention or sorption of the compounds increased with the size of the PAC and the number of lipophilic substituents, but decreased when polar substituents were present. The PAC retention was much stronger to the two HA columns than to the FA and blank column, both for hydrophobic polycyclic aromatic hydrocarbons (PAH) and the polar PAC. Other factors impacting the PAC binding may be specific interactions with HA and the ionic strength of the aqueous phase. The technique has been applied to do direct determinations of Koc.     

Cultivating hybrid collectives: research methods for enacting community food economies in Australia and the Philippines

Across the globe, groups are experimenting with initiatives to create alternatives to the dominant food system. What role might research play in helping to strengthen and multiply these initiatives? In this paper we discuss two research projects in Australia and the Philippines in which we have cultivated hybrid collectives of academic researchers, lay researchers and various non-human others with the intention of enacting community food economies. We feature three critical interactions in the “hybrid collective research method”: gathering, which brings together those who share concerns about community food economies; reassembling, in which material gathered is deliberatively rebundled to amplify particular insights; and translating, by which reassembled ideas are taken up by other collectives so they may continue to “do work”. We argue that in a climate-changing world, the hybrid collective research method fosters opportunities for a range of human and non-human participants to act in concert to build community food economies.     

Using computational fluid dynamics (CFD) for blast wave predictions

Explosions will, in most cases, generate blast waves. While simple models (e.g., Multi Energy Method) are useful for simple explosion geometries, most practical explosions are far from trivial and require detailed analyses. For a reliable estimate of the blast from a gas explosion it is necessary to know the explosion strength. The source explosion may not be symmetric; the pressure waves will be reflected or deflected when hitting objects, or even worse, the blast waves may propagate inside buildings or tunnels with a very low rate of decay. The use of computational fluid dynamics (CFD) explosion models for near and far field blast wave predictions has many advantages. These include more precise estimates of the energy and resulting pressure of the blast wave, as well as the ability to evaluate non-symmetrical effects caused by realistic geometries, gas cloud variations and ignition locations. This is essential when evaluating the likelihood of a given leak source as cause of an explosion or equally when evaluating the potential risk associated with a given leak source for a consequence analysis.In addition, unlike simple methods, CFD explosion models can also evaluate detailed dynamic effects in the near and far field, which include time dependent pressure loads as well as reflection and focusing of the blast waves. This is particularly valuable when assessing actual near-field blast damage during an explosion investigation or potential near-field damage during a risk analysis for a facility. One main challenge in applying CFD, however, is that these models require more information about the actual facility, including geometry details and process information. Collecting the necessary geometry and process data may be quite time consuming. This paper will show some blast prediction validation examples for the CFD model FLACS. It will also provide examples of how directional effects or interaction with objects can significantly influence the dynamics of the blast wave. Finally, the challenge of obtaining useful predictions with insufficient details regarding the geometry will also be addressed.     

Bryophyte responses to microclimatic edge effects across riparian buffers.

Although riparian buffers are an important aspect of forest management in the boreal forest of Canada, little is known about the habitat conditions within buffers, due in part to complex edge effects in response to both the upland clearcut and the stream. We investigated microclimatic conditions and bryophyte growth and vitality in seven locations between the stream edge and 60 m into the upland undisturbed conifer forests and at the clearcut sites with riparian buffer 30 km northwest of Thunder Bay, Ontario, Canada. We hypothesized that the growth and vitality of a pleurocarpous moss, Hylocomium splendens, and an acrocarpous moss, Polytrichum commune, would be directly related to the microclimatic gradients detected. We further hypothesized that sensitivity of the bryophytes to environmental factors will vary depending on their life form type, i.e., pleurocarpous moss will respond differently than the acrocarpous moss. Both bryophyte species were transplanted in pots and placed at 10-m intervals along 60-m transects perpendicular to the stream across the buffer and undisturbed sites. Bryophyte growth, cover, and vitality, as well as microclimatic parameters and plant cover, were measured over the summer in 2003. The riparian buffers were simultaneously affected by microclimatic gradients extending from both the clearcut edge and the riparian-upland ecotonal edge. Both bryophyte species responded to changes in the microclimatic conditions. However, vapor pressure deficit (VPD) was the most important factor influencing the growth of H. splendens, whereas for P. commune growth soil moisture was most important. Our study confirms earlier findings that interior forest bryophytes such as H. splendens can be used as indicators to monitor edge effects and biodiversity recovery following forest harvesting. We demonstrate that growth and vitality of these bryophytes reflect the prevailing near-ground microclimatic conditions at the forest edges. Abundance estimates of such bryophytes can be used to determine the depth of edge effects across both ecotonal edges (e.g., riparian-upland forest edge) and anthropogenically created edges (e.g., clearcut edge). Forest management practices must consider depth of edge in determining the appropriate width of riparian buffers that would be necessary to sustain biodiversity and associated values at the land/water interface.     

Chemical evaluation of odor reduction by soil injection of animal manure

Field application of animal manure is a major cause of odor nuisance in the local environment. Therefore, there is a need for methods for measuring the effect of technologies for reducing odor after manure application. In this work, chemical methods were used to identify key odorants from field application of pig manure based on experiments with surface application by trailing hoses and soil injection. Results from three consecutive years of field trials with full-scale equipment are reported. Methods applied were: membrane inlet mass spectrometry (MIMS), proton-transfer-reaction mass spectrometry (PTR-MS), gold-film hydrogen sulfide (H?S) detection, all performed on site, and thermal desorption gas chromatography with mass spectrometry (TD-GC/MS) based on laboratory analyses of field samples. Samples were collected from a static flux chamber often used for obtaining samples for dynamic olfactometry. While all methods were capable of detecting relevant odorants, PTR-MS gave the most comprehensive results. Based on odor threshold values, 4-methylphenol, H?S, and methanethiol are suggested as key odorants. Significant odorant reductions by soil injection were consistently observed in all trials. The flux chamber technique was demonstrated to be associated with critical errors due to compound instabilities in the chamber. This was most apparent for H?S, on a time scale of a few minutes, and on a longer time scale for methanethiol.     

Detection of potential harmful algal bloom-causing microalgae from freshwater prawn farms in Central Luzon,Philippines, for bloom monitoring and prediction

Prawn aquaculture industry is one of the developing economic activities in the Philippines. Generally, a wide range of microalgae typically grow and proliferate in many aquaculture ponds. However, certain species of microalgae have the ability to form harmful algal blooms (HABs) which often bring damaging consequences to the aquaculture industry, food safety, and the environment. The study aims to identify and characterize the composition of microalgae (particularly Cyanophyta) that are capable of forming HABs in selected freshwater prawn culture ponds in Central Luzon, Philippines, using morphological, ultrastructural, and molecular characterizations. From water samples collected in ten selected ponds across Central Luzon (Bulacan, Nueva Ecija, Pampanga, Tarlac, and Zambales), potential HAB formers such as Oscillatoria agardhii, O. princeps, Microcystis aeruginosa, and M. wesenbergii were observed to have occurred mostly, while Anabaena circinalis was only observed in one site. Both morphological and ultrastructural methods brought upon some challenges and limitations while molecular methods using 16S rRNA gene and phylogenetic analysis which were optimized in this study offered better and more efficient ways of identification and were helpful in resolving genus-level and species-level relationships. The influence of physicochemical properties of pond water, especially nutrient levels (nitrate, nitrite, and orthophosphate) on the occurrence of these cyanobacteria was also analyzed. As a pioneering study on freshwater HABs in aquaculture ponds in the country, results of the study can provide information to improve the knowledge in bloom occurrence and prediction, and to develop freshwater HAB prevention and control methods.