Herbicide residues in grapes and wine

Abstract

The persistence of several common herbicides from grapes to wine has been studied. Shiraz, Tarrango and Doradillo grapes were separately sprayed with either norflurazon, oxyfluorfen, oxadiazon or trifluralin ‐ persistent herbicides commonly used for weed control in vineyards. The dissipation of the herbicides from the grapes was followed for 28 days following treatment. Results showed that norflurazon was the most persist herbicide although there were detectable residues of all the herbicides on both red and white grapes at the end of the study period. The penetration of herbicides into the flesh of the grapes was found to be significantly greater for white grapes than for red grapes. Small‐lot winemaking experiments showed that norflurazon persisted at levels close to the initial concentration through vinification and into the finished wine. The other herbicides degraded, essentially via first‐order kinetics, within the period of “ first fermentation”; and had largely disappeared after 28 days. The use of charcoal together with filter pads, or with diatomaceous earth was shown to be very effective in removing herbicide residues from the wine. A 5% charcoal filter removed more than 96% of the norflurazon persisting in the treated wine.     

EXPOSURE ASSESSMENT OF POPULATIONS USING ENVIRONMENTAL MODELING,DEMOGRAPHIC ANALYSIS,AND GIS1

ABSTRACT: Simulation of ground-water flow and fate of contaminants in the subsurface environment constitutes a major phase of most environmental assessment and site remediation studies. These simulation studies yield information on spatial and temporal distributions of contaminants in the subsurface media. An important use of this information is to conduct exposure assessment studies. Spatial and temporal distributions of both chemical concentrations and exposed populations render this integrated exposure analysis task rather difficult. Geographic Information Systems (GIS), on the other hand, provide a platform in which layered, spatially distributed databases can be manipulated with ease, thereby simplifying exposure analysis tasks significantly. In this paper, we describe procedures that combine the simulation models and demographic databases under a GIS platform to automate the exposure assessment phase of a typical health assessment study. Procedures developed herein significantly simplify the post-processing phase of the analysis, and render the overall task more ‘user friendly.’ A site-specific application is included as a demonstration of the proposed process.     

The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

Settled dust has been collected inside the main foyers ofthree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a streetcanyon used almost exclusively by heavy duty dieselvehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis byscanning electron microscope and energy dispersive X-rayanalysis. Using these analytical techniques, individualparticle analysis was undertaken for morphology andchemistry. Seasonal variations and variations due tolocation were observed in both the morphologicalmeasurements and chemical analysis. Many of the differencesappear attributable to the influence of road traffic, inparticular, the heavy duty diesel vehicles, travellingalong the street canyon.     

Why—and how to—benchmark for environmental excellence

Benchmarking your company'S environmental program against that of another company or organization is one of the more effective means of assuring it is on track toward environmental excellence. If used properly and objectively, it provides a means of gauging the progress of your environmental program while allowing both companies to benefit from new and innovative ideas for improvement. Benchmarking is capable of measuring program efficiency, program design, and program outputs. Benchmarking also provides environmental managers the unique opportunity of sharing successes and failures with respect to program integration into operations. This article describes the steps involved in designing and implementing benchmarking to assess the design of an overall environmental management program.     

Acid rain: chemistry and transport

This review describes the more important features of the emission, chemistry, transport and deposition of pollutants involved in acid deposition. Global emissions, both natural and man-made, of sulphur and nitrogen oxides are discussed and examples of spatial distributions and trends over the last century presented. The more significant chemical and physical processes involved in the transformation of the primary emissions into their acidic end products are described, including a summary of the approximate timescales of the processes involved. Measurements and modelled calculations of spatial and temporal patterns in the deposition of acidic pollutants by both wet and dry pathways are presented.     

Reducing atrazine losses: water quality implications of alternative runoff control practices

Water quality is being affected by herbicides, some allegedly harmful to human health. Under scrutiny is atrazine (1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine), a commonly used herbicide in corn (Zea mays L.) and sorghum [Sorghum bicolor (L.) Moench] production. Concentrations of soluble and adsorbed atrazine losses sometimes exceed the safe drinking water standard of 3 microg L(-1) established by the USEPA. This study assesses the protective implications of runoff control structures and alternative crop farming practices to minimize atrazine losses. Using a computerized simulation model, APEX, the following four practices were the most effective with respect to the average atrazine loss as a percent of the amount applied: (i) constructing sediment ponds, 0.09%; (ii) establishing grass filter strips, 0.14%; (iii) banding a 25% rate of atrazine, 0.40%; and (iv) constructing wetlands, 0.45%. Other atrazine runoff management options, including adoption of alternative tillage practices such as conservation and no-till as well as splitting applications between fall and spring, were marginally effective.     

Pilot‐scale evaluation using bioaugmentation to enhance PCE dissolution at dover AFB national test site

An Interstate Technology and Regulatory Council (ITRC) forum was recently held that focused on six case studies in which bioremediation of dense nonaqueous‐phase liquids (DNAPLs) was performed; the objective was to demonstrate that there is credible evidence for bioremediation as a viable environmental remediation technology. The first two case studies from the forum have been previously published; this third case study involves a pilot‐scale demonstration that investigated the effects of biological activity on enhancing dissolution of an emplaced tetrachloroethene (PCE) DNAPL source. It used a controlled‐release test cell with PCE as the primary DNAPL in a porous media groundwater system. Both laboratory tests and a field‐scale pilot test demonstrated that bioaugmentation can stimulate complete dechlorination to a nontoxic end product and that the mass flux from a source zone increases when biological dehalorespiration activity is enhanced through nutrient (electron donor) addition and bioaugmentation. All project goals were met. Important achievements include demonstrating the ability to degrade a PCE DNAPL source to ethene and obtaining significant information on the impacts to the microbial populations and corresponding isotope enrichments during biodegradation of a source area. © 2007 Wiley Periodicals, Inc.     

A framework for assessing the sustainability of brownfield developments

In England, the development of urban brownfield sites is a significant planning policy aimed at supporting urban regeneration and protecting the countryside. Brownfield sites are required, in policy, to be developed in a sustainable way. However, determining what this means in practice is unclear. This paper presents a framework for assessing the sustainability of brownfield developments, devised to clarify the stakeholders in land reuse and establish how sustainability can be achieved on reused sites. The framework has been used in research investigating the sustainability of five brownfield developments in England. The performance of the framework in this research is assessed and its potential practical use outlined.