Congenital myotonic dystrophy: An often unsuspected cause of severe polyhydramnios

Two cases of severe polyhydramnios are presented in which the unsuspected diagnosis of myotonic dystrophy was made in the patient and the fetus.     

Hydrochemical and isotopic effects associated with petroleum fuel biodegradation pathways in a chalk aquifer

Hydrochemical data, compound specific carbon isotope analysis and isotopic enrichment trends in dissolved hydrocarbons and residual electron acceptors have been used to deduce BTEX and MTBE degradation pathways in a fractured chalk aquifer. BTEX compounds are mineralised sequentially within specific redox environments, with changes in electron acceptor utilisation being defined by the exhaustion of specific BTEX components. A zone of oxygen and nitrate exhaustion extends approximately 100 m downstream from the plume source, with residual sulphate, toluene, ethylbenzene and xylene. Within this zone complete removal of the TEX components occurs by bacterial sulphate reduction, with sulphur and oxygen isotopic enrichment of residual sulphate (epsilon(s) = -14.4 per thousand to -16.0 per thousand). Towards the plume margins and at greater distance along the plume flow path nitrate concentrations increase with delta15N values of up to +40 per thousand indicating extensive denitrification. Benzene and MTBE persist into the denitrification zone, with carbon isotope enrichment of benzene indicating biodegradation along the flow path. A Rayleigh kinetic isotope enrichment model for 13C-enrichment of residual benzene gives an apparent epsilon value of -0.66 per thousand. MTBE shows no significant isotopic enrichment (delta13C = -29.3 per thousand to -30.7 per thousand) and is isotopically similar to a refinery sample (delta13C = -30.1 per thousand). No significant isotopic variation in dissolved MTBE implies that either the magnitude of any biodegradation-induced isotopic fractionation is small, or that relatively little degradation has taken place in the presence of BTEX hydrocarbons. It is possible, however, that MTBE degradation occurs under aerobic conditions in the absence of BTEX since no groundwater samples were taken with co-existing MTBE and oxygen. Low benzene delta13C values are correlated with high sulphate delta34S, indicating that little benzene degradation has occurred in the sulphate reduction zone. Benzene degradation may be associated with denitrification since increased benzene delta13C is associated with increased delta15N in residual nitrate. Re-supply of electron acceptors by diffusion from the matrix into fractures and dispersive mixing is an important constraint on degradation rates and natural attenuation capacity in this dual-porosity aquifer.     

Evolution of particulate regulation in China--prospects and challenges of exposure-based control

China's urban and rural populations face very serious health risks from combustion particles. Major sources of exposure to inhalable particulates include the burning solid fuels (biomass and coal) for household cooking and heating, coal-fired industrial and residential boilers, tobacco smoking, and diesel motor vehicles. China began to address particulate pollution problems over 25 years ago and has implemented a series of progressively more aggressive policies. This paper reviews the successes and limitations of past and existing policies for particulate controls, as well as the effects of China's economic reforms and energy policies on particulate exposure and pollution management. We examine the challenge of emissions reporting, required as part of both China's pollution levy system and emerging system for "total emissions control." Finally, we discuss practical steps toward exposure-based regulation of particulates, which would take advantage of the high cost-effectiveness for lifesaving of controlling particulate exposure from household and neighborhood sources relative to that of controlling exposure from industrial sources.     

Haloacetic acids in the aquatic environment. Part II: ecological risk assessment

Haloacetic acids (HAAs) are environmental contaminants found in aquatic ecosystems throughout the world as a result of both anthropogenic and natural production. The ecological risk posed by these compounds to organisms in freshwater environments, with a specific focus on aquatic macrophytes, was characterized. The plants evaluated were Lemna gibba, Myriophyllum spicatum and M. sibiricum and the HAAs screened were monochloroacetic acid (MCA), dichloroacetic acid (DCA), trichloroacetic acid (TCA), trifluoroacetic acid (TFA) and chlorodifluoroacetic acid (CDFA). Laboratory toxicity data formed the basis of the risk assessment, but field studies were also utilized. The estimated risk was calculated using hazard quotients (HQ), as well as effect measure distributions (EMD) in a modified probabilistic ecological risk assessment. EMDs were used to estimate HAA thresholds of toxicity for use in HQ assessments. This threshold was found to be a more sensitive measure of low toxicity than the no observed effect concentrations (NOEC) or the effective concentration (EC10). Using both deterministic and probabilistic methods, it was found that HAAs do not pose a significant risk to freshwater macrophytes at current environmental concentrations in Canada, Europe or Africa for both single compound and mixture exposures. Still, HAAs are generally found as mixtures and their potential interactions are not fully understood, rendering this phase of the assessment uncertain and justifying further effects characterization. TCA in some environments poses a slight risk to phytoplankton and future concentrations of TFA and CDFA are likely to increase due to their recalcitrant nature, warranting continued environmental surveillance of HAAs.     

Effects of a mixture of tetracyclines to Lemna gibba and Myriophyllum sibiricum evaluated in aquatic microcosms

The impact of a mixture of oxytetracycline, chlortetracycline, tetracycline and doxycycline on Myriophyllum sibiricum and Lemna gibba was investigated using fifteen 12,000-L microcosms (k=5, n=3). Significant concentration-response relationships were only found for M. sibiricum, where dry mass was 69, 47, 30, and 7% of controls at respective treatment concentrations of 0.080, 0.218, 0.668, and 2.289 micromol/L. Somatic endpoints were strongly and negatively correlated with percent light transmission, except plant length, which was positively correlated. Treated microcosms experienced a reduction in the percent of surface irradiance penetrating the water column as high as 99.8% at a depth of 70 cm, relative to controls. Position relative to the water column was likely responsible for the differential effects observed between floating (L. gibba) and submerged (M. sibiricum) species of macrophytes. A hazard quotient assessment of the lowest EC10 value indicated significant risk, exceeding the critical HQ value, but not the lowest EC25 value.     

Mineralogical variables that control the antibacterial effectiveness of a natural clay deposit

As antibiotic-resistant bacterial strains emerge and pose increased global health risks, new antibacterial agents are needed as alternatives to conventional antimicrobials. Naturally occurring antibacterial clays have been identified which are effective in killing antibiotic-resistant bacteria. This study examines a hydrothermally formed antibacterial clay deposit near Crater Lake, OR (USA). Our hypothesis is that antibacterial clays buffer pH and Eh conditions to dissolve unstable mineral phases containing transition metals (primarily Fe²⁺), while smectite interlayers serve as reservoirs for time release of bactericidal components. Model pathogens (Escherichia coli ATCC 25922 and Staphylococcus epidermidis ATCC 14990) were incubated with clays from different alteration zones of the hydrothermal deposit. In vitro antibacterial susceptibility testing showed that reduced mineral zones were bactericidal, while more oxidized zones had variable antibacterial effect. TEM images showed no indication of cell lysis. Cytoplasmic condensation and cell wall accumulations of <100 nm particles were seen within both bacterial populations. Electron energy loss analysis indicates precipitation of intracellular Fe³⁺-oxide nanoparticles (<10 nm) in E. coli after 24 h. Clay minerals and pyrite buffer aqueous solutions to pH 2.5–3.1, Eh > 630 mV and contain elevated level (mM) of soluble Fe (Fe²⁺ and Fe³⁺) and Al³⁺. Our interpretation is that rapid uptake of Fe²⁺ impairs bacterial metabolism by flooding the cell with excess Fe²⁺ and overwhelming iron storage proteins. As the intracellular Fe²⁺ oxidizes, it produces reactive oxygen species that damage biomolecules and precipitates Fe-oxides. The ability of antibacterial clays to buffer pH and Eh in chronic non-healing wounds to conditions of healthy skin appears key to their healing potential and viability as an alternative to conventional antibiotics.     

New Technology for Conducting Radiation Hazard Assessments: The Application of the Underwater Radiation Spectral Identification System (URSIS) at the Massachusetts Bay Industrial Waste (U.S.A.)

The Underwater Radiation Spectral Identification System (URSIS) is a portable spectrometer used for the in situ detection of radioactivity in the marine environment. This paper reports on the first time application of this technology to assess, in a preliminary manner, the potential radiation threat to the public and environment at an aquatic disposal site – the Massachusetts Bay Industrial Waste Site (IWS). Utilizing the meneuvering capabilities of ROV and manned submersible vehicles, the URSIS was successfully positioned close (5–10 cm) to waste containers for a period sufficient to detect, in real time, the presence of radioactive materials. Spectral data from 45 individual targets indicated that the radionuclides present in sediments which draped or partially buried waste containers were consistent with natural background concentrations. No man-made radionuclides were detected at any of the target or background measurement locations. These data support the conclusion that low-level radiation does not pose an imminent and widespread human health or ecological threat in Massachusetts Bay.     

Parameters Influencing Sediments Resuspension and the Link to Sorption of Inorganic Compounds

In the aquatic environment, the accumulation of chemicalcontaminants by sediments poses a potential threat to endemiclife forms and drinking water resources. Trace metals such asCd, Cu, Cr, Ni, Pb, and toxic organic compounds, are among awide variety of contaminants having an affinity for sediments.In this study, experiments were performed simulating sedimentresuspension in the lower Housatonic River, Connecticut, using aParticle Entrainment Simulator. Analyses of grain sizedistributions, porosities and total organic contents of thesediments suggested that these parameters influence theredistribution and entrainment of settleable solids in the watercolumn. These findings were established by evaluating the impactof one parameter on sediment resuspension as a function ofstream flow with the other two characteristics being heldconstant. Total suspended solids and volatile suspended solidsresuspension concentration ranged from 3.2 to 20648.3 mg L^-1,and 1.5 to 1823.8 mg L^-1, respectively, with subsequentincreases in flow rates from 9 to 6 dynes cm^-2. The resuspension concentrations were augmentedby sediment porosity (22.0 to 57.5%), percent finer grain-size distributions at 0.1 mm, and total organic content (2.7 g kg^-1 to 29.0 g kg^-1). Using K _p values, and the dissolvedcontaminant levels of various trace metals, the particulatecontaminant levels of the metals were determined under variousoscillation rates. As sediment resuspension increased withincreased stream flow, there was an overall general increasefrom 0.02 to 33.6 g L^-1 in the particulatecontaminant levels of Cd, Cu, Cr, Ni and Pb.     

Examples of the role of analytical chemistry in environmental risk management research

Analytical chemistry is an important tier of environmental protection and has been traditionally linked to compliance and/or exposure monitoring activities for environmental contaminants. The adoption of the risk management paradigm has led to special challenges for analytical chemistry applied to environmental risk analysis. Namely, methods developed for regulated contaminants may not be appropriate and/or applicable to risk management scenarios. This paper contains examples of analytical chemistry applied to risk management challenges broken down by the analytical approach and analyte for some selected work in our laboratory. Specific techniques discussed include stable association complex electrospray mass spectrometry (cESI-MS), gas chromatography-mass spectrometry (GC-MS), split-flow thin cell (SPLITT) fractionation and matrix-assisted laser desorption time of flight mass spectrometry (MALDI-ToF-MS). Specific analytes include haloacetic acids (HAA9), perchlorate, bromate, triazine degradation products, metal-contaminated colloids and Cryptosporidium parvum oocysts.     

Invasive Microstegium populations consistently outperform native range populations across diverse environments

Plant species introduced into novel ranges may become invasive due to evolutionary change, phenotypic plasticity, or other biotic or abiotic mechanisms. Evolution of introduced populations could be the result of founder effects, drift, hybridization, or adaptation to local conditions, which could enhance the invasiveness of introduced species. However, understanding whether the success of invading populations is due to genetic differences between native and introduced populations may be obscured by origin x environment interactions. That is, studies conducted under a limited set of environmental conditions may show inconsistent results if native or introduced populations are differentially adapted to specific conditions. We tested for genetic differences between native and introduced populations, and for origin x environment interactions, between native (China) and introduced (U.S.) populations of the invasive annual grass Microstegium vimineum (stiltgrass) across 22 common gardens spanning a wide range of habitats and environmental conditions. On average, introduced populations produced 46% greater biomass and had 7.4% greater survival, and outperformed native range populations in every common garden. However, we found no evidence that introduced Microstegium exhibited greater phenotypic plasticity than native populations. Biomass of Microstegium was positively correlated with light and resident community richness and biomass across the common gardens. However, these relationships were equivalent for native and introduced populations, suggesting that the greater mean performance of introduced populations is not due to unequal responses to specific environmental parameters. Our data on performance of invasive and native populations suggest that post-introduction evolutionary changes may have enhanced the invasive potential of this species. Further, the ability of Microstegium to survive and grow across the wide variety of environmental conditions demonstrates that few habitats are immune to invasion.