CCA-treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal

Chromated copper arsenate (CCA)-treated wood is a preservative treated wood construction product that grew in use in the 1970s for both residential and industrial applications. Although some countries have banned the use of the product for some applications, others have not, and the product continues to enter the waste stream from construction, demolition and remodeling projects. CCA-treated wood as a solid waste is managed in various ways throughout the world. In the US, CCA-treated wood is disposed primarily within landfills; however some of the wood is combusted in waste-to-energy (WTE) facilities. In other countries, the predominant disposal option for wood, sometimes including CCA-treated wood, is combustion for the production of energy. This paper presents an estimate of the quantity of CCA-treated wood entering the disposal stream in the US, as well as an examination of the trade-offs between landfilling and WTE combustion of CCA-treated wood through a life-cycle assessment and decision support tool (MSW DST). Based upon production statistics, the estimated life span and the phaseout of CCA-treated wood, recent disposal projections estimate the peak US disposal rate to occur in 2008, at 9.7 million m(3). CCA-treated wood, when disposed with construction and demolition (C&D) debris and municipal solid waste (MSW), has been found to increase arsenic and chromium concentrations in leachate. For this reason, and because MSW landfills are lined, MSW landfills have been recommended as a preferred disposal option over unlined C&D debris landfills. Between landfilling and WTE for the same mass of CCA-treated wood, WTE is more expensive (nearly twice the cost), but when operated in accordance with US Environmental Protection Agency (US EPA) regulations, it produces energy and does not emit fossil carbon emissions. If the wood is managed via WTE, less landfill area is required, which could be an influential trade-off in some countries. Although metals are concentrated in the ash in the WTE scenario, the MSW landfill scenario releases a greater amount of arsenic from leachate in a more dilute form. The WTE scenario releases more chromium from the ash on an annual basis. The WTE facility and subsequent ash disposal greatly concentrates the chromium, often oxidizing it to the more toxic and mobile Cr(VI) form. Elevated arsenic and chromium concentrations in the ash leachate may increase leachate management costs.     

Comparison of the industrial source complex and AERMOD dispersion models: case study for human health risk assessment

Air quality models are typically used to predict the fate and transport of air emissions from industrial sources to comply with federal and state regulatory requirements and environmental standards, as well as to determine pollution control requirements. For many years, the U.S. Environmental Protection Agency (EPA) widely used the Industrial Source Complex (ISC) model because of its broad applicability to multiple source types. Recently, EPA adopted a new rule that replaces ISC with AERMOD, a state-of-the-practice air dispersion model, in many air quality impact assessments. This study compared the two models as well as their enhanced versions that incorporate the Plume Rise Model Enhancements (PRIME) algorithm. PRIME takes into account the effects of building downwash on plume dispersion. The comparison used actual point, area, and volume sources located on two separate facilities in conjunction with site-specific terrain and meteorological data. The modeled maximum total period average ground-level air concentrations were used to calculate potential health effects for human receptors. The results show that the switch from ISC to AERMOD and the incorporation of the PRIME algorithm tend to generate lower concentration estimates at the point of maximum ground-level concentration. However, the magnitude of difference varies from insignificant to significant depending on the types of the sources and the site-specific conditions. The differences in human health effects, predicted using results from the two models, mirror the concentrations predicted by the models.     

Integrating Groundwater Conservation and Reuse into Remediation Projects

Groundwater remediation projects generally involve extraction and treatment of contaminated groundwater. The current state of the practice does not include an emphasis on conservation and reuse of groundwater. Consequently treated groundwater is typically disposed in sanitary or storm sewers. Longstanding water conservation and reuse practices in the municipal wastewater industry provide a body of experience available to the remediation industry. Case studies of conservation and reuse options for groundwater at remediation sites have been found across a broad range of geographic settings and regulatory jurisdictions. The intent of this article is to stimulate a more holistic view of the groundwater associated with remediation projects and to promote conservation and beneficial reuse of a vital natural resource. © 2014 US Sustainable Remediation Forum     

An evaluation of the social dimensions in public participation in rural domestic waste source-separated collection in Guilin,China

A comprehensive evaluation of public participation in rural domestic waste (RDW) source-separated collection in China was carried out within a social-dimension framework, specifically in terms of public perception, awareness, attitude, and willingness to pay for RDW management. The evaluation was based on a case study conducted in Guilin, Guangxi Zhuang Autonomous Region, China, which is a representative of most inland areas of the country with a GDP around the national average. It was found that unlike urban residents, rural residents maintained a high rate of recycling, but in a spontaneous manner; they paid more attention to issues closely related to their daily lives, but less attention to those at the general level; their awareness of RDW source-separated collection was low and different age groups showed significantly different preferences regarding the sources of knowledge acquirement. Among potential information sources, village committees played a very important role in knowledge dissemination; for the respondents’ pro-environmental attitudes, the influencing factor of “lack of legislation/policy” was considered to be significant; mandatory charges for waste collection and disposal had a high rate of acceptance among rural residents; and high monthly incomes had a positive correlation with both public pro-environmental attitudes and public willingness to pay for extra charges levied by RDW management. These observations imply that, for decision-makers in the short term, implementing mandatory RDW source-separated collection programs with enforced guidelines and economic compensation is more effective, while in the long run, promoting pro-environmental education to rural residents is more important.     

Re-examining log law velocity profile in smooth open channel flows

Environmental Fluid Mechanics - A comprehensive investigation of velocity distribution is presented, and the log law is re-examined using experimental data from a smooth uniform open channel flow....     

Devils lake emergency outlet diversion conflict

The Devils Lake Emergency Outlet Diversion conflict is systematically studied from a strategic viewpoint using the Graph Model for Conflict Resolution in order to obtain insights about the resolution of this nagging international dispute. By modelling the conflict for the situation existing as of July 2005, just before the project began operation, the dispute is put into proper perspective and, subsequently, a stability analysis is carried out to obtain potential resolutions or equilibria. The results of a sensitivity analysis accurately predict the deal which actually took place when Canada and the American state of North Dakota reached a negotiated settlement. Finally, suggestions are put forward for improving the Boundary Waters Treaty of 1909 between Canada and the United States.     

Adsorption of isoxaflutole degradates to aluminum and iron hydrous oxides

Isoxaflutole is a preemergence herbicide that has been marketed as a substitute for atrazine. It is rapidly transformed to a more stable and soluble diketonitrile degradate (DKN) after field application and can further degrade to a benzoic acid degradate (BA) within soil. However, no previous research has been conducted to investigate DKN and BA sorption to metal oxide minerals. The primary objective of this research was to elucidate the interactions of DKN and BA with synthetic hydrous aluminum and iron oxides (HAO and HFO, respectively) to understand how variably charged minerals may influence adsorption of these compounds in soil. The herbicide degradates did adsorb to HAO and HFO, and the data were well described by the Freundlich model (R2 > 0.91), with Nvalues ranging from 0.89 to 1.2. Adsorption isotherms and Kd values demonstrate that BA is adsorbed to HFO to a greater extent than other degradate-mineral combinations that were studied. The degree of hysteresis between adsorption/desorption isotherms was characterized as slight (hysteresis index values < 1.7), suggesting weak DKN and BA retention to HFO and HAO oxide surfaces. Degradate adsorption was observed to greatly diminish as suspension pH increased. Attenuated total reflectance-Fourier transform infrared spectra show no evidence that DKN or BA adsorb to mineral surfaces as inner-sphere complexes under hydrated conditions. Instead DKN and BA adsorb to positively charged metal oxide surfaces as outer-sphere or diffuse ion swarm complexes via electrostatic attraction. This research indicates that metal oxides may serve as important retardants for DKN and BA migration through acidic soils enriched with aluminum and iron oxides.     

Sustainable fishing gear: the case of modified circle hooks in a Costa Rican longline fishery

Our research aims to identify longline fishing gear modifications that can improve fishing selectivity and reduce incidental capture of non-target species. Catch rates and anatomical hook locations (AHL) were compared when using a 14/0 standard ??control?? circle hook with a 0° offset and an experimental ??appendage?? hook in a Costa Rican longline fishery. With the appendage, the maximum dimension of the appendage hook was increased by 10% and the minimum dimension of the hook by 19%. A total of 1,811 marine animals were captured during five fishing trips. By taxonomic groups, sea turtles represented the largest total catch (27%), followed by sharks (26%), rays (25%), mahimahi (Coryphaena hippurus) (12%), and tunas and billfish (10%). Non-target and discard species, such as rays and sea turtles, accounted for over half of the total catch. Catch per unit effort (CPUE; number of individuals per 1,000 hooks) was higher with control hooks compared to appendage hooks for all species?? categories except rays; appendage hooks caught 52% fewer sea turtles and 23% fewer tunas and billfish than standard hooks, which represents a significant reduction in bycatch of endangered and other species. No differences were found in the AHL for sea turtles, suggesting use of the appendage may not incur additional advantages regarding turtles?? post-release survivorship. Despite lower catch rates for marketable species, such as sharks and mahimahi, use of the appendage resulted in dramatic reductions in catch rates of sea turtles. The results suggest that large scale adoption of hooks with a significantly wider hook dimension could be an effective conservation measure to maintain marine biodiversity while allowing for continued fishing.