Detection of ciliostatic activity in fungal growth on building materials

Varying ciliostatic activity was found in extracts of biomass from building materials inoculated with pure isolates of some molds previously isolated from buildings. Extracts from growth on materials composed of finely divided cellulose (plaster board and construction cardboard) were more active than those from growth on Rockwool. Extracts of biomass from all three materials demonstrated an activity greater than control samples. Based on the activity observed here, it is conceivable that the measurement of ciliostatic activity of biomass scraped from contaminated building materials could be useful for planning removal strategies.     

Simultaneous nitrification-denitrification and clarification in a pseudoliquified activated sludge system.

This paper describes results from a pilot study of a novel wastewater treatment technology, which incorporates nutrient removal and solids separation to a single step. The pseudoliquified activated sludge process pilot system was tested on grit removal effluent at flowrates of 29.4 to 54.7 m3/d, three different solid residence times (SRT) (15, 37, and 57 days), and over a temperature range of 12 to 28 degrees C. Despite wide fluctuations in the influent characteristics, the system performed reliably and consistently with respect to organics and total suspended solids (TSS) removals, achieving biochemical oxygen demand (BOD) and TSS reductions of > 96% and approximately 90%, respectively, with BOD5 and TSS concentrations as low as 3 mg/L. Although the system achieved average effluent ammonia concentrations of 2.7 to 3.2 mg/L, nitrification efficiency appeared to be hampered at low temperatures (< 15 degrees C). The system achieved tertiary effluent quality with denitrification efficiencies of 90 and 91% total nitrogen removal efficiency at a total hydraulic retention time of 4.8 hours and an SRT of 12 to 17 days. With ferric chloride addition, effluent phosphorous concentrations of 0.5 to 0.8 mg/L were achieved. Furthermore, because of operation at high biomass concentrations and relatively long biological SRTs, sludge yields were over 50% below typical values for activated sludge plants. The process was modeled using activated sludge model No. 2, as a two-stage system comprised an aerobic activated sludge system followed by an anoxic system. Model predictions for soluble BOD, ammonia, nitrates, and orthophosphates agreed well with experimental data.     

Detection of indoor PCB contamination by thermal desorption of dust. A rapid screening method?

Although PCB in caulking materials has been forbidden for many years in most of Europe, including Denmark, there has been continued interest to measure PCB levels in the air of contaminated buildings and blood of the occupants (Mengon and Schlatter 1993, Fromme et al. 1996, Ewers et al. 1998, Currado and Harrad 1998, Gabrio et al. 2000). The relatively low priority for investigations of this contamination is probably due to the small quantities inhaled compared to exposure via food, and the rapid metabolism of the most volatile congeners demonstrated by low concentrations of all congeners in the blood of exposed persons (Ewers et al. 1998, Gabrio et al. 2000). There is, however, evidence that PCB containing caulking materials have been used even during the '90s (Fromme et al. 1996). In Denmark, it is estimated that 75 t PCB is still in buildings (Organization of Sealant Branch's Manufacturers and Distributors 2000). During an investigation of dust from buildings with excessive microbial growth (including 35 rooms from 9 buildings), the analysis of semivolatile compounds by thermal desorption-GC/MS of samples from a single building surprisingly revealed large amounts of PCBs containing 3, 4 and 5 chlorine atoms, 10-20 times the amounts found in samples from other buildings. Extraction of the dust by SFE followed by GC/ECD analysis for 12 PCB congeners showed that there was approximately 20 times the total PCB concentrations in dust from the polluted building compared to the levels in the other buildings. Subsequent headspace analysis of caulking material from the polluted building revealed this to be the source. Shelf dust functions as a passive sampling medium and, thus, can be used as a screening method to detect PCB and other semivolatile pollution indoors.     

Production and transmission of honey bee queen (Apis mellifera L.) mandibular gland pheromone

Summary The social cohesiveness of eusocial insect colonies is maintained primarily through the utilization of pheromones. In this study we quantitatively elucidated the production, secretion, and transmission of 9-keto2(E)-decenoic acid (9-ODA), one of the components of the mandibular gland pheromone of the honey bee queen Apis mellifera; this is the only identified primer pheromone complex in the eusocial insects. Mated queens produce 12–400 g of 9-ODA/day, or between 10% and 170% the average amount found in the glands at any one time. Approximately 0.5 g of 9-ODA is maintained on the body surface of queens by an equilibrium between exudation, internalization, tracking on the comb, and removal by workers. Retinue bees, attending the queen, remove the greatest amount, although the role of the wax as both a sink and a medium for pheromone transfer has been previously underestimated. Only about 1 in 10 retinue workers pick up substantial quantities of pheromone while attending the queen and, within seconds, most of the acquired 9-ODA is found externally on the abdomen, or in the gut. These attendants, also called messenger bees, transfer 9-ODA to other workers, mostly through direct contacts, but also via the wax. A model evaluating the pathways and relative quantities of 9-ODA transferred throughout the nest is presented. As well as being important for a basic understanding of the system, the results have implications for the proper design and use of pheromones in bee management.Offprint requests to: K. Naumann     

The influence of science on Canada's foreign policy on persistent organic pollutants (1985–2001)

The role of science in environmental foreign policymaking has received little attention in the international environmental politics literature, and systematic, in-depth case studies of the influence of science on environmental foreign policy with respect to persistent organic pollutants (POPs) are entirely missing. We present a case study of the influence of science on Canada's foreign policy on POPs from the discovery of the transboundary nature of the POPs problem around 1985 to the signing of the United Nations Stockholm Convention on Persistent Organic Pollutants in 2001. Influence was analyzed in terms of a knowledge–action methodology that focused on the types of scientific knowledge and the actions taken by scientists that were influential. Data were collected through interviews and extensive document analysis. We conclude that, while individual knowledge types and actions were influential during various periods (single-factor explanations), it was an increasingly layered and integrated “package” of knowledge types and actions, with human health impacts as its touchstone and partnering between scientists and non-scientists as its watchword, that propelled and sustained Canada's foreign policy on the POPs issue.     

Assessing drought-related ecological risk in the Florida Everglades

In the winter-spring of 2001, South Florida experienced one of the worst droughts in its recorded history. Out of a myriad of ecological concerns identified during this time, the potential for catastrophic peat fire and negative impacts to wading bird reproduction emerged as critical issues. Water managers attempted to strike a balance between the environment and protection of water supplies for agriculture and urban interests. It became evident, however, that a broad-scale, integrated way to portray and prioritise ecological stress was lacking in the Florida Everglades, despite this being considered a necessary tool for addressing issues of environmental protection. In order to provide a framework for evaluating various water management operations using real-time information, we developed GIS-based indices of peat-fire risk and wading bird habitat suitability. These indices, based on real physical, chemical, and biological data, describe two ecological conditions that help define the physical and biological integrity of the Everglades. In addition to providing continuous, updated assessments throughout the drought period, we incorporated predictive models of water levels to evaluate how various water management alternatives might exacerbate or alleviate ecological stress during this time.     

Septic tank and agricultural non‐point source pollution within a rural watershed

This investigation addresses the problem of Non‐Point Source (NPS) pollution in the rural Lake Weatherford watershed in Parker County, Texas. This reservoir is the primary municipal water supply for the City of Weatherford, Texas. The principal method of wastewater disposal is the on‐site system or septic tanks for the small residential areas surrounding the reservoir.

Sources of NPS pollution of interest in this watershed include agricultural operations as well as the residential areas. These sites were identified with the aid of aerial photography and field investigation. Suspected NPS problems were substantiated through a sampling program involving chemical and biological testing of the reservoir. Results indicate that there is significant NPS pollution contamination of Lake Weatherford from agricultural sources and seepage from on‐site wastewater disposal systems. Excessive fecal coliform and fecal streptococcus counts (>500 bacteria/100 ml) were generally associated with rainfall events and several samples showed values > 100000 bacteria/100 ml. The fecal coliform/fecal streptococcus ratios indicated contamination from human sources, animal sources, and a combination of both. Nutrient concentrations fluctuated from quite low to high with ammonia as the most consistent problem. High ammonia values were also associated with rainfall events.     

Effects of dry bulk density and particle size fraction on gas transport parameters in variably saturated landfill cover soil

Landfill sites are emerging in climate change scenarios as a significant source of greenhouse gases. The compacted final soil cover at landfill sites plays a vital role for the emission, fate and transport of landfill gases. This study investigated the effects of dry bulk density, ρ(b), and particle size fraction on the main soil-gas transport parameters - soil-gas diffusivity (D(p)/D(o), ratio of gas diffusion coefficients in soil and free air) and air permeability (k(a)) - under variably-saturated moisture conditions. Soil samples were prepared by three different compaction methods (Standard and Modified Proctor compaction, and hand compaction) with resulting ρ(b) values ranging from 1.40 to 2.10 g cm(-3). Results showed that D(p) and k(a) values for the '+gravel' fraction (<35 mm) became larger than for the '-gravel' fraction (<2mm) under variably-saturated conditions for a given soil-air content (ε), likely due to enhanced gas diffusion and advection through less tortuous, large-pore networks. The effect of dry bulk density on D(p) and k(a) was most pronounced for the '+gravel' fraction. Normalized ratios were introduced for all soil-gas parameters: (i) for gas diffusivity D(p)/D(f), the ratio of measured D(p) to D(p) in total porosity (f), (ii) for air permeability k(a)/k(a)(,pF4.1), the ratio of measured k(a) to k(a) at 1235 kPa matric potential (=pF 4.1), and (iii) for soil-air content, the ratio of soil-air content (ε) to total porosity (f) (air saturation). Based on the normalized parameters, predictive power-law models for D(p)(ε/f) and k(a)(ε/f) models were developed based on a single parameter (water blockage factor M for D(p) and P for k(a)). The water blockage factors, M and P, were found to be linearly correlated to ρ(b) values, and the effects of dry bulk density on D(p) and k(a) for both '+gravel' and '-gravel' fractions were well accounted for by the new models.