Risk evaluation with waste scenario: lead emissions in solder waste treatment

In this work, an estimate of the elevation of airborne lead concentrations via the lead solder contained in domestic electricity installations and an investigation into the effects of human exposure were conducted using a simulation method. The elevation of airborne lead concentrations due to incineration was calculated to be 0.001 µg/m³ maximum. The simulation results of the calculations indicated that blood lead concentrations could reach as high as 10⁻⁵ µg/dl. These concentrations could primarily be attributed to the inhalation of airborne lead particles. In addition, we discuss the influences of lead solder disposal on the ecosystem via soil and water.     

抚顺城区大气悬浮颗粒物污染与呼吸系统疾病死亡率相关性的定量分析

为了定量分析大气总悬浮颗粒物(TSP)对居民呼吸系统疾病死亡率的影响,采用单因素泊松(Poisson)回归分析法,研究了辽宁省抚顺市城区TSP浓度变化与市区1999～2003年呼吸系统疾病死亡率的相关关系.结果发现,在消除了时间、气象等因素影响后,滞后4日TSP浓度每增加50μg·m-3,呼吸系统疾病总人群组死亡率相对危险度(OR)增加1.02195(95%CI=1.00195～1.04245),即滞后4日TSP浓度变化造成总人群组呼吸系统疾病死亡率明显增加的超额死亡率为2.195%.抚顺城区大气TSP污染可能是市区居民呼吸系统疾病死亡率增加的原因之一.     

Biodegradation of synthetic surfactants by river microorganisms

Ｂｉｏｄｅｇｒａｄａｔｉｏｎｏｆｓｙｎｔｈｅｔｉｃｓｕｒｆａｃｔａｎｔｓｂｙｒｉｖｅｒｍｉｃｒｏｏｒｇａｎｉｓｍｓ￥ＨｉｄｅａｋｉＭａｋｉ；ＫｅｎｒｏｕＴｏｋｕｈｉｒｏ；ＹａｓｕｈｉｒｏＦｕｊｉｗａｒａ；ＭｉｃｈｉｈｉｋｏＩｋｅ；ＫｅｎｊｉＦｕｒｕｋ...     

Selection of product categories for a national eco-labelling scheme in developing countries: a case study of Vietnamese manufacturing sub-sectors

Although the selection of product categories is a deciding factor for the success of eco-labelling schemes, there are no consistent methods for determining selection factors and how to prioritise product categories for developing countries (DgCs). This paper attempts to identify appropriate factors for product category selection and formulate a prioritisation method applicable to DgCs. We first examined the selection factors currently utilised in schemes worldwide by conducting a questionnaire survey of representatives of foreign schemes. Selection factors were illustrated on a plot graph, which indicated the percentage of factors implemented in the schemes of DgCs and developed countries (DGs), and their plausibility assessed when utilised in the schemes of DgCs. In this way, we proposed three groups of factors: an exclusion factor, five core factors and seven operational factors. Then, under the conditions of DgCs, such as socioeconomic issues and availability of data, we used and modified some judging guidelines of the European Ecolabel (the EU Flower), e.g. determining the environmental impacts and potential of environmental improvements, in the scoring method to prioritise product categories by weighting factors. In light of our findings, we utilised the proposed factors and modified the scoring method to prioritise the screened primary list of product categories of Vietnamese manufacturing sub-sectors. By scoring factor-based questions and prioritising in three ways, i.e. following the scoring method of the EU Flower programme, totalling all values with equal weighting, and totalling all values but by doubling the weighting of core factors compared with operational factors, we observed that the weighted prioritisation differentiates priority product categories more clearly than the other methods. We propose the two highest potential candidates for eco-labelling in Vietnam, namely textile/garment and fishery products.     

Biodegradation of aliphatic-aromatic copolyesters: evaluation of the final biodegradability and ecotoxicological impact of degradation intermediates.

The biological degradation behaviour of the aliphatic-aromatic copolyester Ecoflex was investigated with regard to the degree of degradation and the intermediates formed during the degradation process. The individual thermophilic strain Thermomonospora fusca, isolated from compost material, was used for the degradation experiments in a defined synthetic medium at 55 degrees C. After 22 days of degradation more than 99.9% of the polymer had depolymerized and with regard to the degradation of the diacid and diol components of Ecoflex only the monomers of the copolyesters (1,4-butanediol, terephthalate and adipate) could be detected by gas chromatography/mass spectroscopy (GC-MS) measurements in the medium. In interrupted degradation experiments predominantly the monoesters of adipic acid and terephthalic acid with 1,4-butanediol were observed in addition to the monomers. In toxicological tests with Daphnia magna and Photobacterium phosphoreum no significant toxicological effect was observed, neither for the monomeric intermediates nor for the oligomeric intermediates. From a risk assessment it can be concluded that there is no indication for an environmental risk when aliphatic-aromatic copolyesters of the Ecoflex-type are introduced into composting processes.     

Development of highly active coated monolith SCR catalyst with strong abrasion resistance for low-temperature application

Monolith SCR catalysts coated with V₂O₅-WO₃/TiO₂ were prepared by varying binder and coating thickness. Comparing with a monolith extruded with 100% V₂O₅-WO₃/TiO₂ powder, a coated monolith with a catalyst-coating layer of 260 μm in thickness exhibited the similar initial NO_x reduction activity at 250°C. After 4 h abrasion (attrition) in an air stream containing 300 g·m⁻³ fine sands (50–100 μm) at a superficial gas velocity of 10 m·s⁻¹, the catalyst still has the activity as a 100% molded monolith does in a 24-h activity test and it retains about 92% of its initial activity at 250°C. Estimation of the equivalent durable hours at a fly ash concentration of 1.0 g·m⁻³ in flue gas and a gas velocity of 5 m·s⁻¹ demonstrated that this coated monolith catalyst is capable of resisting abrasion for 13 months without losing more than 8% of its initial activity. The result suggests the great potential of the coated monolith for application to de-NO_x of flue gases with low fly ash concentrations from, such as glass and ceramics manufacturing processes.     

Genetic influence on caste determination underlying the asexual queen succession system in a termite

The question of how reproductives and sterile workers differentiate within eusocial groups has long been a core issue in the study of social insects. Recent studies have shown that not only environmental factors but also genetic factors affect caste differentiation. In the termite Reticulitermes speratus, queens produce their replacements (neotenics) asexually but use normal sexual reproduction to produce other colony members. Here, we demonstrate a genetic influence on caste determination underlying the asexual queen succession system in this termite species. Thelytoky in termites is accomplished by automixis with terminal fusion, yielding almost completely homozygous offspring; thus, parthenogenetically and sexually produced offspring profoundly differ in heterozygosity. An analysis of the relationship between the reproductive dominance of female neotenics obtained from experimentally orphaned colonies and their genotypes at five microsatellite loci showed that homozygosity at two loci influenced the developmental priority and/or reproductive quality of neotenics. These results suggest the existence of a multi-locus system affecting the queen fecundity and explain why parthenogens have genetic priority to become neotenics in this termite species.     

Ultraweak photon emission from herbivory-injured maize plants

Following perception of herbivory or infection, plants exhibit a wide range of inducible responses. In this study, we found ultraweak photon emissions from maize leaves damaged by Helicoverpa armigera (Noctuidae). Interestingly, mechanically damaged maize leaves treated with caterpillar regurgitants emitted the same intensity and pattern of photon emissions as those from maize leaves damaged by caterpillars. Furthermore, two-dimensional imaging of the leaf section treated with the oral secretions clearly shows that photon emissions were observed specifically at the lip of the wound exposed to the secretions. These results suggest that the direct interaction between maize leaf cells and chemicals contained in caterpillar regurgitants triggers these photon emissions.     

The socially optimal recycling rate: Evidence from Japan

This paper estimates the average social cost of municipal waste management as a function of the recycling rate. Social costs include all municipal costs and revenues, costs to recycling households to prepare materials estimated with an original method, external disposal costs, and external recycling benefits. Results suggest average social costs are minimized with recycling rates well below observed and mandated levels in Japan. Cost-minimizing municipalities are estimated to recycle less than the optimal rate. These results are robust to changes in the components of social costs, indicating that Japan and perhaps other developed countries may be setting inefficiently high recycling goals.     

Removal of pentachlorophenol from contaminated soil by catalytic oxidation with iron(III)-porphyrin complexes and potassium monopersulfate

Pentachlorophenol (PCP) in contaminated soil was removed by treatment with aqueous solutions of iron(III)-porphyrin complexes as catalysts and potassium monopersulfate (KHSO₅) as the oxygen donor. The contaminated soils were artificially prepared by spiking PCP to the kaolin and ando soils. Three types of iron(III)-porphyrin complexes, tetra(?p-sulfophenyl) porphineiron(III) (Fe(III)-TPPS), tetra(N-methyl-4-pyridil)porphineiron(III) (Fe(III)-TMPyP) and heme, were examined, and Fe(III)-TPPS was found to be the most effective for removing PCP. Although the sequential addition of KHSO₅ was examined, in an attempt to improve the efficiency of PCP removal, it was not effective. In a preliminary test of various aqueous solutions, the addition of humic acid (HA), with a lower degree of humification, led to a significant enhancement in PCP removal. When HA was added to the soil system, the percentages of PCP removal were increased by up to 10% compared to the absence of HA. Therefore, the addition of HA to the catalytic system was useful in enhancing PCP removal from contaminated soil.