Policies and regulations for Brazil’s artisanal gold mining sector: analysis and recommendations

In Brazil, artisanal and small-scale gold mining (ASGM) produces in the range of 6 tonnes of gold (Au) per annum, and employs approximately 200,000 people. Most of this mining activity is in the Amazon region, where miners have been extracting gold for more than 40 years. In the Tapajos River Basin, assessments indicate that around 99% of miners operate without the environmental and mining permits required by law. This is a result of a combination of unrealistic or lack of proper policies and regulations, lack of political will, lack of infra-structure to enforce the existing regulations and lack of incentives to miners to comply with legal requirements.In this article, we analyze a group of 20 laws, decrees and resolutions in Brazil, focusing on how idiosyncrasies in these regulations reveal gaps between policy and reality in ASGM areas. Artisanal miners operate in vast and remote areas and the government lacks the resources (personnel, vehicles, information and materials) to enforce the laws. Our analysis emphasizes the need for creating new government commitments and identifying priority areas where government agents can focus their efforts.There is no single solution for the environmental, health, technical and socio-economic problems associated with ASGM. However, a realistic approach should consider improving the level of education of miners, creating government programs to provide technical assistance in the field, simplifying administrative procedures and ensuring adequate measures for enforcement.     

Effects of workplace thermal conditions on safe work behavior

The effect of workplace thermal conditions on worker safety has not previously been adequately investigated, due in part to the difficulty of defining a suitable safety performance measure. This report describes a study conducted in two industrial plants to determine if a correlation exists between the safety-related behavior of workers and workplace thermal conditions. Both heat exposure measurements and behavioral observations were taken over a 14-month period, for a total of over 17,000 observations. The results indicate that temperatures below and above those typically preferred by most people have a significantly detrimental effect on the safety-related behavior of workers. This is demonstrated by an index based on the ratio of observed unsafe behaviors to the total number of observed behaviors. The relationship between this index of unsafe behavior and the ambient temperature formed a U-shaped curve. The minimum unsafe behavior index occurred within the zone of preferred temperature (approximately 17°C to 23°C, WBGT). Other factors such as metabolic workload and time during the shift also had significant effects on worker safety-related behavior.     

EFFECT OF RAINFALL EXCESS CALCULATIONS ON MODELED HYDROGRAPH ACCURACY AND UNIT-HYDROGRAPH PARAMETERS1

ABSTRACT: Two methods of computing rainfall excess in the U.S. Army Corps of Engineers’flood hydrograph package (HEC-1), the Initial and Uniform method and the Exponential method, are compared to evaluate the effects on modeled hydrograph accuracy. Two computed unit-hydrograph parameters, time of concentration and storage coefficient, were also compared. Rainfall and runoff data from 209 storms in 32 gaged basins in Illinois were used to calibrate the HEC-1 model. Three hydrograph characteristics - sum of incremental flows, peak discharge, and time of peak discharge - were used to evaluate modeled hydrograph accuracy. Mean percent error for each basin and hydrograph characteristic was computed. An evaluation of the mean errors indicates that, although some bias in modeled hydrograph accuracy is evident, rainfall excess computed using either method results in a computed hydrograph accuracy that is within generally accepted limits. Application of a linear-regression model shows no significant differences in computed values of unit-hydrograph parameters.     

Procedure for assessing visual quality for landscape planning and management

Incorporation of aesthetic considerations in the process of landscape planning and development has frequently met with poor results due to its lack of theoretical basis, public involvement, and failure to deal with spatial implications. This problem has been especially evident when dealing with large areas, for example, the Adirondacks, Scenic Highways, and National Forests and Parks. This study made use of public participation to evaluate scenic quality in a portion of the Niagara Escarpment in Southern Ontario, Canada. The results of this study were analyzed using thevisual management model proposed by Brown and Itami (1982) as a means of assessing and evaluating scenic quality. Themap analysis package formulated by Tomlin (1980) was then applied to this assessment for the purpose of spatial mapping of visual impact. The results of this study illustrate that it is possible to assess visual quality for landscape/management, preservation, and protection using a theoretical basis, public participation, and a systematic spatial mapping process.     

Linking Monitoring and Effects Research: EMAP's Intensive Site Network Program

The EMAP program has been organized into three primary elements: Multi-Tier Design, Indicators, and Index Sites. The Index Sites program (DISPro - Demonstration Intensive Site Project) is the primary activity within the Index Sites element of EMAP. This project represents an inter-agency effort between EPA/ORD and DOI/NPS to develop a demonstration of an intensive site network of monitoring and research locations throughout the United States, utilizing the Nation's parklands as "outdoor laboratories." Twelve parks were selected to establish this demonstration. These 12 parks were selected because they are readily accessible, have a history of monitoring environmental information, and represent a broad spectrum of ecological communities. EMAP, through DISPro, is examining whether a "network" of sites existing within the parks can be used to address monitoring issues for global-scale environmental stressors (e.g., air pollution) as well as locale-specific stressors (e.g., air deposition, water-borne) and coordinated with cause-effect, issue-based research related to these environmental stressors. As a first activity, EPA will provide each of the sites with the instrumentation to monitor UV-B. The intent of the program is to initiate a consistent air monitoring program at each site to be followed by consistent monitoring within other media. The project will initiate research projects at all the sites (eventually) to examine the effects of environmental stressors of importance at each of the sites.     

Field measurement of lead in workplace air and paint chip samples by ultrasonic extraction and portable anodic stripping voltammetry

On-site measurement of lead in workplace air filter samples and paint chip samples by ultrasonic extraction and anodic stripping voltammetry (UE-ASV) was evaluated in the field during renovation and remodeling activities in residences having leaded paint. Aerosol and paint samples were collected using standard techniques, and the samples were analyzed on-site for lead content by portable UE-ASV. Lead in sample extracts was subsequently determined by atomic absorption (AA) spectrometry in a fixed-site laboratory. The remaining sample extracts plus undissolved material (air filters or paint particles) were then subjected to hot plate digestion in concentrated nitric acid-30% hydrogen peroxide prior to AA analysis for lead. Field UE-ASV lead data were thereby compared to UE-AA and hot plate digestion-AA results from fixed-site laboratory lead measurement. Determination of lead in air filter samples by UE-ASV (over the range of 5 microg to approximately 800 microg Pb per sample) was extremely well correlated with lead measurement by UE-AA and hot plate digestion-AA procedures. However, a significant negative bias associated with ASV measurement was observed, and this was attributed to a matrix effect. Lead measurement in paint chip samples by UE-ASV (over the range of approximately 10 to approximately 550 microg Pb g(-1)) was well correlated with lead measurement by UE-AA and hot plate digestion-AA procedures. However, correlation and precision were lower for lead measurement in paint samples as compared to aerosol samples, and a negative bias was also observed. Lead measurements by UE-AA were compared to lead determinations by hot plate digestion-AA; these data were highly correlated and demonstrated no significant bias. Thus it was concluded that the ultrasonic extraction procedure performed equivalently to hot plate digestion. It was reasoned that matrix effects due to the preparation and analysis of paint chip particles resulted in greater imprecision as well as negative bias by ASV measurement. Despite significant negative bias in this sample set, UE-ASV offers promise for on-site measurement of lead in samples of interest in occupational and environmental health.     

Using Information on Spatial Variability of Small Estuaries in Designing Large-Scale Estuarine Monitoring Programs

In the early 1990s, EPA's Environmental Monitoring and Assessment Program (EMAP) documented the ecological condition of the overall population of small estuaries along the mid-Atlantic coast of the United States. However, the Program did not provide detailed information on the condition of individual estuaries less than 260 km² in surface area, a group of estuaries of concern to environmental managers. To address the needs of environmental managers, when EMAP returned to the region in summer 1997, it included a study of the spatial variability of ecological indicators within individual small estuaries. At 127 probability-based sites in 10 estuaries, EMAP measured a variety of parameters of water quality and sediments, including dissolved oxygen (DO), nutrients, grain size of sediments, contaminants in sediments, and community structures of benthic macroinvertebrates. From this information the ecological condition (e.g., percent area with DO concentrations below 5mg L^–1) for each estuary, along with 90% confidence interval, was determined. The width of the confidence interval was then recalculated for sample sizes ranging from two stations to the total number of stations sampled in that estuary. Confidence interval widths were then plotted against sample size. These plots can be useful in designing future regional monitoring programs with a goal of describing conditions in individual systems as well as broad geographic regions. Results illustrate that beyond five stations per estuary, the reduction in the width of the confidence interval with increasing sampling intensity is relatively small; however, individual program managers need to determine "how small is small enough."     

The condition of coral reefs in South Florida (2000) using coral disease and bleaching as indicators

The destruction of coral reef habitats has occurred at unprecedented levels during the last three decades. Coral disease and bleaching in the Caribbean and South Florida have caused extensive coral mortality with limited recovery, often coral reefs are being replaced with turf algae. Acroporids were once dominant corals and have diminished to the state where they are being considered as endangered species. Our survey assessed the condition of reef corals throughout South Florida. A probability-based design produced unbiased estimates of the spatial extent of ecological condition, measured as the absence or presence and frequency or prevalence of coral diseases and bleaching intensity over large geographic regions. This approach allowed us to calculate a quantifiable level of uncertainty. Coral condition was estimated for 4100 hectares (ha) (or 41.0 km²) of coral reefs in South Florida, including reefs in the Florida Keys National Marine Sanctuary (FKNMS), New Grounds, Dry Tortugas National Park (DTNP), and Biscayne National Park (BNP). The absence or presence of coral disease, causal coral bleaching, partial bleaching and coral paling were not good indicators of overall coral condition. It was more useful to report the prevalence of anomalies that indicated a compromised condition at both the population and community levels. For example, 79% of the area in South Florida had less than 6% of the coral colonies diseased, whereas only 2.2% (97.15 ha) of the sampled area had a maximum prevalence of 13% diseased coral colonies at any single location. The usefulness of causal bleaching might be more important when considering the prevalence of each of the three different states at a single location. For example, paling was observed over the entire area, whereas bleaching and partial bleaching occurred at 19 and 41% of the area, respectively. An index for coral reef condition might integrate the prevalence and species affected by each bleaching state at individual locations. By establishing these baselines, future surveys can examine changes and trends in the spatial distribution of coral conditions in South Florida and able to score the reefs as to their health status.     

Bio-analytical and chemical characterisation of offshore produced water effluents for estrogen receptor (ER) agonists

The in vitro estrogen receptor (ER) agonist potency and C1 to C9 alkyl substituted phenol content of offshore produced water effluents collected from the UK sector of the North Sea were determined using a combination of bio-analytical and chemical analysis techniques. An in vitro reporter gene assay was used to determine ER agonist potency, whilst gas chromatography coupled to mass spectrometry (GC-MS) was used to quantify the concentration of alkylphenols. The in vitro ER agonist potency was highly variable and ranged from less than the limit of detection (theoretically 0.03 ng 17beta-estradiol (E2) l(-1)) to 91 ng E2 l(-1). C1 to C5 alkylphenol concentrations were also highly variable ranging from 5 to 1600 microg l(-1) with a median concentration of 206 microg l(-1). These data reflect the highly variable composition of produced water discharges from different fields. The observed poor correlation of the alkylphenol isomer content and ER agonist activity suggests that other compounds present in the produced water discharges may be responsible for the ER agonist activity observed. It is recommended that further work be performed to characterise the full range of ER agonists present in offshore produced water discharges.     

Growth patterns of Amphiura filiformis support the hypothesis of organic enrichment in the Skagerrak-Kattegat area

Population size structure, abundance and biomass of the burrowing ophiuroid Amphiura filiformis were measured in the period 1970 to 1989 at three widely spaced sites at 55 to 100 m depth in the Skagerrak-Kattegat area. This species is a dominant component of the fauna in the area, and also one of the species accounting for a great part of a recent general increase in benthic biomass. Abundance at two of the sites and biomass at all three sites increased significantly with time from the 1970s onwards. Maximum individual size and growth of the cohort of adults showed a marked increase in the period 1980 to 1983 at the three sites. In the 1980s annual absolute growth increments of the recruits were clearly greater than in the 1970s, and size-specific growth rates were virtually unchanged. These results are consistent with the hypothesis that recent increases in benthic biomass in this area result from increased input of food to the benthos. A. filiformis has the potential for rapid growth; estimated maximum weight-specific growth rates were more than 1.5% d^-1 in the disc diameter interval 3 to 9 mm, which is comparable to rates found in shallow water filtering bivalves. The maximum disc diameter growth rate was ca. 0.4 mm mo^-1.