Recent changes in ecosystem services and human well-being in the Bangladesh coastal zone

This study takes an historical approach in order to establish how the form and function of the social-ecological system that represents the Bangladesh south-western coastal zone has changed over recent decades. Time series data for a range of ecosystem services and drivers are analysed to define the range of trends, the presence of change points, slow and fast variables and the significant drivers of change. Since the 1980s, increasing gross domestic product and per capita income mirror rising levels of food and inland fish production. As a result, the size of population below the poverty line has reduced by ~17 %. In contrast, non-food ecosystem services such as water availability, water quality and land stability have deteriorated. Conversion of rice fields to shrimp farms is almost certainly a factor in increasing soil and surface water salinity. Most of the services experienced statistically significant change points between 1975 and 1980, and among the services, water availability, shrimp farming and maintenance of biodiversity appear to have passed tipping points. An environmental Kuznets curve analysis suggests that the point at which growing economic wealth feeds back into effective environmental protection has not yet been reached for water resources. Trends in indicators of ecosystem services and human well-being point to widespread non-stationary dynamics governed by slowly changing variables with an increased likelihood of systemic threshold changes/tipping points in the near future. The results will feed into simulation models and strategies that can define alternative and sustainable paths for land management.     

Water,sanitation, hygiene and waste disposal practices as COVID-19 response strategy: insights from Bangladesh

Environment, Development and Sustainability - The COVID-19 pandemic has caused a global emergence, and the absence of a proven vaccine or medicine has led to the implementation of measures to...     

GCM-based analysis of water availability along the Tone River and Tokyo Metropolitan Area under climatic changes

Tone River supplies most of the water requirements of the Tokyo Metropolitan Area (TMA). Lowering of Tone flow and yearly fluctuation, however, is causing water shortage along TMA nowadays. This study investigated the future water availability scenarios under climatic changes. A state-of-the-art approach to utilize the output of several GCM has been demonstrated to investigate the future water availability scenarios for TMA from the Tone River. An integrated modeling approach for water balance considering several hydrological risk indices was adopted to quantify the future changes in this case. It is observed that the future summer precipitation along the Tone basin is going to be increased considerably, while an almost constant or decreasing trend is observed for winter season. Natural flow availability for winter or spring seasons thus can be crucial under future scenarios. After reservoir routing, the hydrological risk indices estimated, however, were not found to be changed significantly due to the presence of a robust reservoir system at the upstream.     

H∞ loop-shaping controller design for a grid-connected single-phase photovoltaic system

This paper presents a H_∞ loop-shaping controller for controlling dc-link voltage by regulating the switching signal of the inverter associated with a grid-connected single-phase photovoltaic system. To facilitate a robust control design, state-space realisation of the system model is made with uncertainties represented by linear fractional transformation. The controller is achieved through H_∞ synthesis followed by obtaining desired loop shapes through the choice of the proper weighting functions. The controller order is reduced by Henkel-norm method for facilitating its practical implementation. Controller performance is evaluated through carrying out simulations on MATLAB/Simulink platform under standard and changing atmospheric conditions, and fault condition.     

阶梯形鱼道中的滚动流研究

最近,小型倾斜河流中的阶梯形鱼道建筑以它的简易与实用而变得日益重要。在这种鱼道中出现的滚动流将产生波涌,并继续向下传播,而且它的周期性滚动可能会严重危害鱼道,因此,我们着手研究了它的严重性以便设计者在设计鱼道时能考虑这些因素。由实验证实滚动流源于阶梯形鱼道的上游。滚动流在稳定流与半平滑流间转变,它在一定时间间隔内不断地从稳定流变成半平滑流,又从半平滑流变成稳定流。它的流量值随着阶梯形水道的几何形状变形而呈现上下限。流量值和时间间隔均随着水池长度的增加而增加。     

Assessing groundwater quality and its sustainability in Joypurhat district of Bangladesh using GIS and multivariate statistical approaches

Sustainable groundwater quality is a key global concern and has become a major issue of disquiets in most parts of the world including Bangladesh. Hence, the assessment of groundwater quality is an important study to ensure its sustainability for various uses. In this study, a combination of multivariate statistics, geographical information system (GIS) and geochemical approaches was employed to evaluate the groundwater quality and its sustainability in Joypurhat district of Bangladesh. The results showed that the groundwater samples are mainly Ca–Mg–HCO₃ type. Principal component analysis (PCA) results revealed that geogenic sources (rock weathering and cation exchange) followed by anthropogenic activities (domestic sewage and agro-chemicals) were the major factors governing the groundwater quality of the study area. Furthermore, the results of PCA are validated using the cluster analysis and correlation matrix analysis. Based on the groundwater quality index (GWQI), it is found that all the groundwater samples belong to excellent to good water quality domains for human consumption, although iron, fluoride and iodide contaminated to the groundwater, which do not pose any significant health hazard according to World Health Organization’s and Bangladesh’s guideline values. The results of irrigation water quality index including sodium adsorption ratio (SAR), permeability index and sodium percentage (Na %) suggested that most of the groundwater samples are good quality water for agricultural uses. The spatial distribution of the measured values of GWQI, SAR, Fe (iron), EC (electrical conductivity) and TH (total hardness) were spatially mapped using the GIS tool in the study area.     

Infant and Under-five Mortality in Bangladesh: Discriminant Analysis

Abstract

Bangladesh is on target for achieving the Millennium Development Goal 4 relating to infant and under-five mortality because of very rapid reduction in mortality in recent years. But this rate of reduction may be difficult to sustain and may hamper the achievement of Millennium Development Goal 4. Therefore, the main objective of this paper is to discuss and compare the different covariates of infant and under-five mortality in the context of overall country, urban and rural levels of Bangladesh using discriminant analysis. For this, the data are taken from Bangladesh Demographic and Health Survey, 2004. In discriminant analysis, the stepwise procedure has been picked up and only the significant variables are ranked according to the rank of Wilk’s Lambda values. The canonical discriminant function coefficients (unstandardized and standardized) for the predictor variables have also been calculated. Both the results show that breastfeeding is the most important variable in discriminating the two groups of mothers, i.e., mothers experiencing to infant mortality or not and mothers experiencing to under-five mortality or not. The related results of discriminant function also indicate that the discriminant function is statistically significant and discriminates well. Therefore, improvements in the health system are essential for promoting the breastfeeding practices (both inclusive and exclusive), which may be the effective strategies to reach families and communities with targeted messages and information.     

Renewable energy in Australia: a wider policy discourse

ABSTRACT

This paper assesses the evolution of generation technology-mix in Australia, with specific emphasis on understanding how such evolution has been shaped by wider political and socio-economic influences. This assessment is predicated on the argument that the contemporary, quintessentially techno-economic, policy discourse on renewable energy is deficient, as it ignores climacteric political and socio-economic influences on generation technology-mix. The methodological framework employed in this paper is informed by the core tenets of technological change theory. The assessment suggests that generation technology-mix in Australia has historically been overwhelmingly influenced by the underlying technological paradigm of the electricity industry; and that this technological paradigm essentially draws its imprimatur from the wider political and socio-economic contexts. By implication, it suggests that a rapid uptake of renewables will have widespread ramifications, extending into political, socio-economic and cultural realms of a society. Clearly, existing policy discourse – that tends to focus on technical potentials, cost competitiveness, externalities and risks of various renewable technologies – is deficient. A much broader discourse is needed. This paper also made an attempt to develop a basis for such a discourse by reviewing broader aspects of the Australian society that would be affected by a rapid uptake of renewables.     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.