Elemental Composition of Airborne Particulates And Source Identification: Data Analysis Techniques

Approaches are discussed and illustrated for the analysis of the very large trace element data set obtained by instrumental neutron activation and emission spectroscopic analysis of over 700, 24 hour ambient air particulate samples collected at 16 sites in Cleveland, OH from August 1971 to October 1972. Examples are presented of the use of pairwise correlation statistics, cluster analysis algorithms, enrichment factors, and pollutant concentration roses to identify sources. It is demonstrated that some elemental constituents of the Cleveland suspended particulate can be related to specific source types: earth’s crust (Al, Si, Sc, Ti, V, La, Sn, Eu, Oy, Th), automotive exhaust (Pb, Br), metallurgy (Fe, Cr, Co) and specific industries (Sb, Hg). Even with 24 hr samples, some sources can be geographically located by the directional characteristics of the element.     

Development and Testing of a Portable Wind Sensitive Directional Air Sampler

Abstract

This paper reports on the performance of the Kimoto 180 sampler and the Wedding ambient PM10 beta gauge sampler. Monodisperse ammonium fluorescein test particles were generated in the laboratory and used to determine the penetration curve of the Kimoto 180 cyclonic inlet. It was found that the actual DpaSOof the Kimoto 180 inlet, 3.5 (xm, is much lower than the designated standard value, 10 um. In the field test, the two beta gauge samplers were collocated with an Andersen SA1200 high-volume sampler to compare their measured daily average PM10 concentrations.

The low Dpa50 of the Kimoto 180 inlet serves to explain why its daily average PM10 concentrations were much lower than the actual PM10 concentrations found in the field study. In addition, the PM10 concentrations of the Kimoto 180 beta gauge sampler were found to be seriously affected by the water vapor content of the ambient air. In contrast, the daily average PM10 concentrations of the Wedding beta gauge sampler were found to be more accurate, and influences by ambient conditions were insignificant     

Compounds in Airborne Participates: Salts and Hydrocarbons

Concentrations of 10 polycyclic aromatic hydrocarbons (PAH), the aliphatlcs as a group, sulfate, nitrate, fluoride, acidity, and carbon In the airborne partlculate matter were measured at 16 sites In Cleveland, OH over a 1 year period during 1971 and 1972. Analytical methods used included gas chromatography, colorimetry, and combustion techniques. Uncertainties in the concentrations associated with the sampling procedures, and the analytical methods are evaluated. The data are discussed relative to other studies and source origins. Benzo(a)pyrene and its high concentrations downwind of coke ovens are discussed. Hydrocarbon correlation studies indicated no significant relations among compounds studied.     

Resuspension of contaminated field and formulated reference sediments Part I: Evaluation of metal release under controlled laboratory conditions

In aquatic systems where metal contaminated sediments are present, the potential exists for metals to be released to the water column when sediment resuspension occurs. The release and partitioning behavior of sediment-bound heavy metals is not well understood during resuspension events. In this study, the release of Cd, Cu, Hg, Ni, Pb and Zn from sediments during resuspension was evaluated using reference sediments with known physical and chemical properties. Sediment treatments with varying quantities of acid volatile sulfide (AVS), total organic carbon (TOC), and different grain size distributions were resuspended under controlled conditions to evaluate their respective effects on dissolved metal concentrations. AVS had the greatest effect on limiting release of dissolved metals, followed by grain size and TOC. Predictions of dissolved concentrations of Cd, Ni, Pb and Zn were developed based on the formulated sediment Σ_metal/AVS ratios with Σ_metal being the total sediment metal concentration. Predicted values were compared to measured dissolved metal concentrations in contaminated field sediments resuspended under identical operating conditions. Metal concentrations released from the field sediments were low overall, in most cases lower than predicted values, reflecting the importance of other binding phases. Overall, results indicate that for sulfidic sediments, low levels of the study metals are released to the dissolved phase during short-term resuspension.     

Sex ratio and oviposition responses to host age and the fitness consequences to mother and offspring in the parasitoid wasp Spalangia endius

In the parasitoid wasp Spalangia endius more offspring and a greater proportion of daughters were oviposited in, and emerged from 0-day-old versus 3-day-old hosts. Offspring that developed on the younger hosts (1) were larger at adulthood, (2) developed more quickly, (3) had higher survivorship to adulthood, and (4) were more often able to chew their way out of the host. Sons and daughters did not differ in how host age affected their size, development rate, or survivorship. The greater proportion of daughters from the younger hosts may be adaptive, as described by the host quality model (a variant of the Trivers and Willard hypothesis). It is adaptive if greater size or more rapid development has a more positive effect on a daughter’s than a son’s fitness and the positive effect is large enough to compensate for sons being trapped disproportionately to daughters in the older hosts. Despite greater success at drilling the younger hosts, mothers did not try to drill them sooner or more often. Having previously oviposited on the older rather than the younger hosts had no detrimental effect on the mother’s subsequent longevity or offspring production. Received: 8 March 2000 / Revised: 9 June 2000 / Accepted: 24 June 2000     

Modeling Animal Habitats Based on Cover Types: A Critical Review

The simplest type of model describing animal habitats is a “cover-type model,” in which a species is assumed to be present in certain vegetation types and absent in others. Ecologists and managers use these models to predict animal distributions for gap analysis and conservation planning. Critics, however, have suggested that the models are overly simplistic and inaccurate. We reviewed the use of cover-type models including assessing their error rates, diagnosing the problems with these models, and determining how they should best be used by managers. To determine models’ accuracy rates, we conducted a meta-analysis of 35 studies in which cover-type models were tested against data on animal occurrences. Models had a mean accuracy rate of 0.71 ± 0.18 (SD). Rates of commission error averaged 0.20 ± 0.16, and omission errors averaged 0.09 ± 0.11. A review of the effects of errors in conservation planning suggests that the observed error rates were high enough to call into question any management decisions based on these models. Reasons for the high error rates of cover-type models include the fallibility of expert opinion, the fact that the models oversimplify how animals actually use habitats, and the dynamic nature of animal populations. Given the high rate of errors in cover-type models, any conclusions based on them should be taken with extreme caution. We suggest that these models are best used as coarse filters to identify locations for further study in the field.     

Non-UV germicidal activity of fresh TiO2 and Ag/TiO2

Fresh TiO2 was found to possess a strong germicidal activity even without UV irradiation. Live Yeast (Saccharomyces cerevisiae) cells in contact with fresh TiO2 were found deformed and dead after 15 min contact. The cause of germicidal activity was discussed from the observed cell deformation, lysis and increased absorption at 1680 cm-1 in FT-IR spectra of the affected cells, which proved the oxidizing effect of fresh TiO2 to cells. The deformation caused by the stretching of cell wall and pressure built-up inside the cell, led to cell burst and release of intracellular materials. The degree of cell deformation was found positively related with the wetting property of TiO2. Cells are negatively charged, for Gram-negative cell (thinner cell wall), a higher germicidal effect was observed than Gram-positive cells. The germicidal effect of TiO2 gradually decreases after exposure to air at room temperature, as the wetting property decreases. This kind of germicidal activity was more effective compared to other germicidal process such as UVA/TiO2 or Ag+. This shed light on designing new germicidal material either maintained by visible light irradiation, or by oxidation effect generated by reactive oxygen species.     

The source parameters, surface deformation and tectonic setting of three recent earthquakes: thessalonki (Greece), tabas-e-golshan (iran) and carlisle (u.k.)

Abstract- Three earthquakes have been studied. These are the Thessaloniki earthquake of 20th June 1978 (Ms = 6.4, Normal faulting), the Tabase-Golshan earthquake of 16th September 1978 (Ms = 7.7 Thrust faulting) and the Carlisle earth-quake of 26th December 1979 (Mb = 5.0, Thrust faulting). The techniques employed to determine source parameters included field studies of SUP face deformation, fault breaks, locations of locally recorded aftershocks and teleseismic studies including joint hypocentral location, first motion methods and waveform modelling. It is clear that these techniques applied together provide more information than the same methods used separately. The moment of the Thessaloniki earthquake determined teleseismically (Force moment 5.2 times 10(25) dyne cm. Geometric moment 1.72 times 10(8) m(3) ) is an order of magnitude greater than that determined using field data (surface ruptures and aftershock depths) (Force moment 4.5 times 10(24) dyne cm. Geometric moment 0.16 times 10(8) m(3) ). It is concluded that for this earthquake the surface rupture only partly reflects the processes on the main rupture plane. This view i s supported by a distribution of aftershocks and damage which extends well outside the region of ground rupture. However, the surface breaks consistently have the same slip vector direction as the fault plane solutions suggesting that they are in this respect related to to the main faulting and are not superficial slumping. Both field studies and waveform studies suggest a low stress drop which may explain the relatively little damage and loss of life as a result of the Thessaloniki earthquake. In contrast, the teleseismic moment of the Tabas-e-Golshan earthquake (Force moment 4.4 times 10(26) dyne cm. Geometric moment 1.5 times 10(9) m(3) ) is similar t o that determined from field studies (Force moment 10.2 times 10(26) dyne cm. Geometric moment 3.4 times 10(9) m(3) ) and the damage and after-shock distributions clearly relate to the surface faulting. It h a s also been observed that high aftershock activity appears beneath gaps in the surface rupture system. The Carlisle earthquake (Force moment 9 times 10(23) dyne cm. Geometric moment 3 times 10(6) m(3) ) produced no surface ruptures. However, dislocation model-ling suggests that surface deformation will be visible on a first order levelling line which passes very close t o the epicentre. A well controlled fault plane solution, the first in the British Isles, derived from an aftershock study shows north-south compression. All three studied earthquakes occurred along major faults which had been reactivated in geological times. The fault on which the Tabas-e-Golshan earthquake occurred could have been identified a s active from evidence of Quaternary motion and previous smaller earthquakes. However, there were no perceptible events in the 12 months preceeding the catastrophic earthquake. In both Thessaloniki and Carlisle, significant foreshocks did occur within 6 months prior to the main shock*     

An overview of effects of climate change on selected arctic freshwater and anadromous fishes

Arctic freshwater and diadromous fish species will respond to the various effects of climate change in many ways. For wide-ranging species, many of which are key components of northern aquatic ecosystems and fisheries, there is a large range of possible responses due to inter- and intra-specific variation, differences in the effects of climate drivers within ACIA regions, and differences in drivers among regions. All this diversity, coupled with limited understanding of fish responses to climate parameters generally, permits enumeration only of a range of possible responses which are developed here for selected important fishes. Accordingly, in-depth examination is required of possible effects within species within ACIA regions, as well as comparative studies across regions. Two particularly important species (Arctic char and Atlantic salmon) are examined as case studies to provide background for such studies.