Synthesis,characterization, and antimicrobial and antioxidant activities of novel bis-isatin carbohydrazone derivatives

In the present study, the synthesis of new bis-isatin carbohydrazone derivatives and their antimicrobial and antioxidant activities were investigated. The structures of new compounds were elucidated by Fourier transform infrared, ¹H nuclear magnetic resonance and mass spectra. The antimicrobial activity of the compounds was determined by using the two-fold serial dilution technique against various bacterial and fungal species in comparison to standard drugs. All synthesized compounds displayed a broad spectrum of activities with minimum inhibitory concentration values ranging from 6.25 to 100 μg/ml against tested microorganisms. The in vitro antioxidant activity was evaluated using 1,1-diphenyl-2-picryl-hydrazyl and hydrogen peroxide (H₂O₂), and the total antioxidant capacity by a phosphomolybdenum assay and their ability to chelate ferrous iron. In general, the derivatives were found to exhibit antioxidant activity. Further, the compounds with electron-withdrawing groups at the C5 position demonstrated significant antimicrobial and antioxidant activities.     

Hepatoprotective activity of 1-(4-(Dimethylamino)Benzylidene)-5-(2-Oxoindolin-3-ylidene) Thiocarbohydrazone in rats

The aim of the present study was to evaluate the hepatoprotective activity of 1-(4-(dimethylamino)benzylidene)-5-(2-oxoindolin-3-ylidene) thiocarbohydrazone, a novel isatin derivative against carbon tetrachloride (CCl₄)-induced hepatotoxicity in rats. Hepatic damage was induced by administration of CCl₄ (1 ml/kg, b.w., p.o.) in combination with liquid paraffin (1:1) as a single dose. The hepatotoxic rats were treated with test compound at doses of 50 or 100 mg/kg for three days and liver damage biomarkers, including activities of serum glutamate pyruvate transaminase (SGPT), serum glutamate oxaloacetate transaminase (SGOT), serum alkaline phosphatase (ALP), and levels of total serum bilirubin (TB) measured in blood samples. Results demonstrated that treatment with test compound at doses of 50 or 100 mg/kg to hepatotoxic rats produced a significant dose-dependent reduction of elevated SGOT, SGPT, ALP activities and TB levels indicating a hepatoprotective effect that was confirmed by histopathological examination of liver tissues. The study results confirmed the hepatoprotective activity of 1-(4-(dimethylamino)benzylidene)-5-(2-oxoindolin-3-ylidene) thiocarbohydrazone in rats.     

Phytoplankton as index of water quality with reference to industrial pollution

In this paper Shannon-Weaver (SI-3.58-4.07, SII-3.1-3.72, SIII-1.64-2.25, SIV-2.54-2.95 and SV-3.09-3.23) diversity index was applied to surface phytoplankton to study the water quality status of river Bhadra receiving Mysore paper mill and Iron and steel mill effluent. A total of 45 species of phytoplankton belonging to 5 classes were recorded and study indicated that the phytoplankton diversity (Chlorophyceae-19 species, Bacillanophyceae-16 species, Cyanophyceae-07 species, Euglenophyceae-2 species and Chrysophyceae-1 species) did not reveal the same type of water quality (water temperature 24.62-27.32 degrees C, pH-7.08-7.25, electrical conductivity-67.49-201.94 micromhos/cm, dissolved oxygen-4.13-5.98 mgl(-1), chloride-12.30-40.85 mgl(-1), calcium-6.49-23.74 mgl(-1), total hardness 28.98-76.65 mgl(1), magnesium-4.69-15.92 mgl(-1), total alkalinity-77.26-86.53 mgl(-1), BOD-1.88-4.01 mgl(-1), COD - 16.53-45 mgl(-1), phosphate-0.001-0.53 mgl(-1), sodium-2.70-7.46 mgl(-1) and potassium-2.37-7.88 mgl(-1)). The investigation emphasized the need of phytoplankton community as index of water quality polluted by industrial effluents at the downstream stretch of the Bhadra river.     

Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene

A comparison of waste and virgin polypropylene (PP) plastics under slow pyrolysis conditions is presented. Moreover, mixtures of waste PP with wastes of polyethylene (PE) and polystyrene (PS) were pyrolyzed under the same operating conditions. Not only the impact of waste on degradation products but also impacts of the variations in the mixing ratio were investigated. The thermogravimetric weight loss curves and their derivatives of virgin and waste PP showed differences due to the impurities which are dirt and food residues. The liquid yield distribution concerning the aliphatic, mono-aromatic and poly-aromatic compounds varies as the ratio of PP waste increases in the waste plastic mixtures. In addition to this, the alkene/alkane ratio of gas products shows variations depending on the mixing ratio of wastes.     

Metallic wastewater treatment by sulfate reduction using anaerobic rotating biological contactor reactor under high metal loading conditions

An-RBC reactor is highly suited to treat metallic wastewater. Metal removal is due to sulfide precipitation via sulfate reduction by SRB. Cu(II) removal was the best among the different heavy metals. Maximum metal removal is achieved at low metal loading condition. Metal removal matched well with the solubility product values of respective metal sulfide salts. This study was aimed at investigating the performance of anaerobic rotating biological contactor reactor treating synthetic wastewater containing a mixture of heavy metals under sulfate reducing condition. Statistically valid factorial design of experiments was carried out to understand the dynamics of metal removal using this bioreactor system. Copper removal was maximum (>98%), followed by other heavy metals at their respective low inlet concentrations. Metal loading rates less than 3.7 mg/L?h in case of Cu(II); less than 1.69 mg/L?h for Ni(II), Pb(II), Zn(II), Fe(III) and Cd(II) are favorable to the performance of the An-RBC reactor. Removal efficiency of the heavy metals from mixture depended on the metal species and their inlet loading concentrations. Analysis of metal precipitates formed in the sulfidogenic bioreactor by field emission scanning electron microscopy along with energy dispersive X-ray spectroscopy (FESEM-EDX) confirmed metal sulfide precipitation by SRB. All these results clearly revealed that the attached growth biofilm bioreactor is well suited for heavy metal removal from complex mixture.     

Development of a nonlocal convective mixing scheme with varying upward mixing rates for use in air quality and chemical transport models

BACKGROUND, AIM, AND SCOPE: Asymmetrical convective non-local scheme (CON) with varying upward mixing rates is developed for simulation of vertical turbulent mixing in the convective boundary layer in air quality and chemical transport models. MATERIALS AND METHODS: The upward mixing rate form the surface layer is parameterized using the sensible heat flux and the friction and convective velocities. Upward mixing rates varying with height are scaled with an amount of turbulent kinetic energy in layer, while the downward mixing rates are derived from mass conservation. RESULTS: This scheme provides a less rapid mass transport out of surface layer into other layers than other asymmetrical convective mixing schemes. DISCUSSION: In this paper, we studied the performance of a nonlocal convective mixing scheme with varying upward mixing in the atmospheric boundary layer and its impact on the concentration of pollutants calculated with chemical and air-quality models. This scheme was additionally compared versus a local eddy-diffusivity scheme (KSC). Simulated concentrations of NO(2) and the nitrate wet deposition by the CON scheme are closer to the observations when compared to those obtained from using the KSC scheme. CONCLUSIONS: Concentrations calculated with the CON scheme are in general higher and closer to the observations than those obtained by the KSC scheme (of the order of 15-20%). Nitrate wet deposition calculated with the CON scheme are in general higher and closer to the observations than those obtained by the KSC scheme. RECOMMENDATIONS AND PERSPECTIVES: To examine the performance of the scheme, simulated and measured concentrations of a pollutant (NO(2)) and nitrate wet deposition was compared for the year 2002. The comparison was made for the whole domain used in simulations performed by the chemical European Monitoring and Evaluation Programme Unified model (version UNI-ACID, rv2.0) where schemes were incorporated.     

High-altitude and long-range transport of aerosols causing regional severe haze during extreme dust storms explains why afforestation does not prevent storms

Environmental Chemistry Letters - Climate change is predicted to induce more extreme events such as storms, heat waves, drought and floods. Dust storms are frequently occurring in northern China....     

Setting conservation priorities for migratory networks under uncertainty

Conserving migratory species requires protecting connected habitat along the pathways they travel. Despite recent improvements in tracking animal movements, migratory connectivity remains poorly resolved at a population level for the vast majority of species, thus conservation prioritization is hampered. To address this data limitation, we developed a novel approach to spatial prioritization based on a model of potential connectivity derived from empirical data on species abundance and distance traveled between sites during migration. We applied the approach to migratory shorebirds of the East Asian‐Australasian Flyway. Conservation strategies that prioritized sites based on connectivity and abundance metrics together maintained larger populations of birds than strategies that prioritized sites based only on abundance metrics. The conservation value of a site therefore depended on both its capacity to support migratory animals and its position within the migratory pathway; the loss of crucial sites led to partial or total population collapse. We suggest that conservation approaches that prioritize sites supporting large populations of migrants should, where possible, also include data on the spatial arrangement of sites.     

Recyling of plastic wastes via pyrolysis

Pyrolysis for the simultaneous generation of oils and gases can be convenient to obtain hydrocarbons and even to recover crude petrochemicals or to generate energy from waste plastics. A Gray–King apparatus has been used to pyrolyze waste polyethylene (PE), polystyrene (PS), both separately and with different compositions. Thermogravimetric analysis of waste plastics indicated the critical temperatures, which should be effective for pyrolysis. The chosen heating rate was low in order to achieve higher liquid yields. The results showed that waste PS yielded higher liquid, and waste PE yielded higher gaseous products. The dominant liquid product of PS waste was styrene whereas for waste PE, prophenylbenzene was the dominant pyrolysis product.