Deponiesickerwässer: Bestimmung zytotoxischer Wirkungen mit dem Pollenschlauchwachstumstest

For risk assessment of environmental samples, rapid and sensitive screening assays for detection of toxic potencies are required. Using leachates from waste deposites in the industrial region Leipzig-Halle (Germany) as an example, we present a simple test procedure suitable for the detection of cytotoxic effects of samples. This method, the pollen tube growth test (PTG), works as follows: Pollen of tobacco (Nicotiana sylvestris Spegazz, & Comes) are suspended in mixtures of growth medium and buffered (pH 6,3 to 7,0) dumping ground leachates. After an 18h-incubation period, growth of pollen tubes is quantified by staining with Alcian blue and subsequent measurment of optical density in a photometer. Sample induced inhibition of pollen tube growth is calculated in relation to controls maintained in pure growth medium. The PTG test shows high sensitivity towards leachates of different chemical composition, and it shows good agreement with assay results from luminescent bacteria tests. We conclude that the PTG test is well suited to assess the hazardous potential of aqueous environmental samples.     

Validation of a test method for the measurement of methanol emissions from stationary sources

Title III of the 1990 Clean Air Act Amendments designated methanol as a pollutant to be regulated. The U.S. Environmental Protection Agency (EPA), through a contract with Research Triangle Institute, has developed a method for measuring methanol emissions from stationary sources. The methanol sampling train (MST) consists of a glass-lined heated probe, two condensate knockout traps, and three sorbent cartridges packed with Anasorb 747. Samples are desorbed with a 1:1 mixture of carbon disulfide (CS2) and N,N-dimethylformamide (DMF). Condensate water and CS2/ DMF samples are analyzed by gas chromatography with flame ionization detection. The MST has a practical quantitation limit of approximately 3 ppm for a 20-L sample. Samples were shown to be stable for at least two weeks after collection. Field tests of the MST and the National Council of the Paper Industry for Air and Stream Improvement (NCASI) methanol sampling method were conducted at two pulp and paper mills. Sampling and analysis procedures followed EPA Method 301 requirements. The sampling location for the first field test was the inlet vent to a softwood bleach plant scrubber, where the methanol concentration was approximately 30 ppm. The mean recovery of spike was 108.3% for the MST method and 81.6% for the NCASI method. Although neither method showed significant bias at the 95% confidence level, the between-methods bias was significantly different. A second field test was conducted at a vent from a black liquor oxidation tank where the methanol concentration was approximately 350 ppm. Mean spike recoveries were 96.6 and 94.2% for the MST and NCASI methods, respectively. The biases of the two methods and the between-methods bias were not significantly different for the second field test.     

Toxicity of the mosquito control pesticide Scourge to adult and larval grass shrimp (Palaemonetes pugio)

This study investigated the toxicity of various concentrations of technical resmethrin and Scourge on adult and larval Palaemonetes pugio, a common grass shrimp species. Two types of tests were conducted for each of the resmethrin formulations using adult and larval grass shrimp life stages, a 96-h static renewal aqueous test without sediment, and a 24-h static nonrenewal aqueous test with sediment. For resmethrin, the 96-h aqueous LC50 value for adult shrimp was 0.53 microg/L (95% confidence interval (CI): 0.46-0.60 microg/L), and for larval shrimp was 0.35 microg/L (95% CI: 0.28-0.42 microg/L). In the presence of sediment, technical resmethrin produced a 24-h LC50 value for adult shrimp of 5.44 microg/L (95% CI: 4.52-6.55 microg/L), and for larval shrimp of 2.15 microg/L (95% CI: 1.35-3.43 microg/L). For Scourge, the 96-h aqueous LC50 for adult shrimp was 2.08 microg/L (95% CI: 1.70-2.54 microg/L), and for larval shrimp was 0.36 microg/L (95% CI: 0.24-0.55 microg/L). The 24-h sediment test yielded an LC50 value of 16.12 microg/L (95% CI: 14.79-17.57 microg/L) for adult shrimp, and 14.16 microg/L (95% CI: 12.21-16.43 microg/L) for larvae. Adjusted LC50 values to reflect the 18% resmethrin concentration in Scourge are 0.37 microg/L (adult), 0.07 microg/L (larvae) for the 96-h aqueous test, and 2.90 microg/L (adult), 2.6 microg/L (larvae) for the 24-h sediment test. Larval grass shrimp were more sensitive to technical resmethrin and Scourge than the adult life stage. The results also demonstrate that synergized resmethrin is more toxic to P. pugio than the nonsynergized form, and that the presence of sediment decreases the toxicity of both resmethrin and Scourge.     

The destruction of ground water threatening pesticides using high intensity UV light

Abstract

A high‐intensity short‐wavelength UV light system was studied for its ability to degrade the pesticides carbofuran, fenamiphos sulfoxide (nemacur sulfoxide), and propazine in aqueous solutions. Half‐lives, rate constants, and breakdown products were determined for all chemicals. The presence of hydrogen peroxide, an oxidant and potential source of hydroxyl radicals, had no effect on the rate of breakdown of any of the chemicals investigated. Short‐wavelength UV light appears to be solely responsible for the observed pesticide breakdown. The breakdown of all three pesticides followed first order kinetics. Carbofuran, nemacur sulfoxide, and propazine had half lives of 3.9, 1.1, and 3.9 minutes, respectively. Breakdown product analysis was performed using capillary gas chromatography/mass spectrometry.     

Adsorption and breakdown of penicillin antibiotic in the presence of titanium oxide nanoparticles in water

The fate and transport of antibiotics in natural water systems is controlled in part by interactions with nanometer (10⁻⁹ m) metal oxide particles. Experiments were performed by mixing solutions of ampicillin (AMP), a common, penicillin-class human and veterinary antibiotic, with 25 nm-TiO₂ (anatase) nanoparticles at different pH conditions. Both sorption and degradation of AMP were observed in the AMP-nanoparticle solutions. For AMP concentrations from ∼3 μM to 2.9 mM the overall AMP removal from solution can be described by linear isotherms with removal coefficients (K_r) of 3028 (±267) L kg⁻¹ at pH 2, 11,533 (±823) L kg⁻¹ at pH 4, 12,712 (±672) L kg⁻¹ at pH 6, and 1941 (±342) L kg⁻¹ at pH 8. Mass spectral analysis of AMP solutions after removal of the solid nanoparticles yielded ions that indicate the presence of peniclloic acid, penilloic acid and related de-ammoniated by-products as possible compounds resulting from the degradation of AMP at the TiO₂ surface.     

Characterization of physicochemical properties of beryllium aerosols associated with prevalence of chronic beryllium disease

Little is known about the physicochemical properties of beryllium aerosols associated with increased risk of beryllium sensitization and chronic beryllium disease (CBD). Such information is needed to evaluate whether airborne mass of beryllium is the appropriate metric of exposure or alternatively to provide a scientific basis for using information on particle size, surface area, and chemistry to support an improved exposure limit based on bioavailability through the inhalation and dermal routes of exposure. Thus, we used a suite of analytical techniques to characterize aerodynamically size-fractionated beryllium particles and powders that have been associated in epidemiological studies with higher prevalence of CBD. Aerosol particles were sampled from the ventilation systems of production lines for powders of beryllium metal and beryllium oxide and for ingots of copper-beryllium alloy. End product powders from the metal and oxide production lines were also collected.Particles released during production of beryllium metal were found to be complex, having heterogeneous composition, including reactive species such as fluorine. Powders from beryllium metal production were of high purity with only a minor component of beryllium oxide. Both particles and powders from oxide production were high-purity oxide. Particles released during production of copper-beryllium alloy were heterogeneous, being predominantly copper oxides. Thus, all particles and powders contain at least some beryllium in the form of beryllium oxide.These data justify efforts to thoroughly characterize beryllium aerosol properties when performing exposure assessments. The data also suggest that differences in particle chemical composition, size, number, and surface area may influence bioavailability of beryllium and contribute to risk of CBD. However, a scientific basis does not yet exist to replace mass as the current metric of exposure.     

Uncertainty and economic analysis of climate change: A survey of approaches and findings

The analysis of climate change is confronted with large uncertainties that need to be taken into account to arrive at meaningful policy recommendations. The main contribution of economics to this interdisciplinary task is to provide formal frameworks and techniques for analyzing climate policy in the context of uncertainty. This paper will give an overview of existing approaches and findings to provide a broad picture of what economics can contribute to the debate.     

Monitoring mercury in fish in a stream system receiving multiple industrial inputs

Sunfish and a minnow species were used as indicators of anthropogenic mercury contamination in an east Tennessee stream system receiving multiple point and non-point discharges. The monitoring of bluegill (Lepomis macrochirus) and redbreast sunfish (Lepomis auritus) identified bioavailable mercury near three geographically separate industrial facilities, and was able to detect decreases in contamination with distance away from these facilities. In general, total mercury concentrations in the tissue of sunfish in this study were low in comparison to the most commonly cited human health threshold limits, although concentrations at some sites exceeded 1 g/g. Caged blacknose dace (Rhinichthys atratulus) were monitored in conjunction with resident fish as an indicator of more discrete sources in selected headwater streams where fish movement was deemed a potential factor affecting mercury body burdens. Mercury concentrations in muscle tissue of caged dace after 12 weeks exposure were generally low (<0.2 g/g) at all sites but higher than in fish from reference streams. mercury accumulation varied between species (sunfish vs. dace) and monitoring method (caged vs. resident) at the same site, with sunfish tending to accumulate higher concentrations of mercury than resident dace which, in turn, contained about twofold higher concentrations than caged dace. However, the site-to-site pattern of mercury accumulation was similar. This study demonstrates the utility of using small stream dwelling fish with restricted home ranges as a tool for identifying and evaluating the bioavailability of mercury sources in large industrial or urbanized settings.