Culturability and concentration of indoor and outdoor airborne fungi in six single-family homes

In this study, the culturability of indoor and outdoor airborne fungi was determined through long-term sampling (24-h) using a Button Personal Inhalable Aerosol Sampler. The air samples were collected during three seasons in six Cincinnati area homes that were free from moisture damage or visible mold. Cultivation and total microscopic enumeration methods were employed for the sample analysis. The geometric means of indoor and outdoor culturable fungal concentrations were 88 and 102 colony-forming units (CFU) m(-3), respectively, with a geometric mean of the I/O ratio equal to 0.66. Overall, 26 genera of culturable fungi were recovered from the indoor and outdoor samples. For total fungal spores, the indoor and outdoor geometric means were 211 and 605 spores m(-3), respectively, with a geometric mean of I/O ratio equal to 0.32. The identification revealed 37 fungal genera from indoor and outdoor samples based on the total spore analysis. Indoor and outdoor concentrations of culturable and total fungal spores showed significant correlations (r = 0.655, p<0.0001 and r = 0.633, p<0.0001, respectively). The indoor and outdoor median viabilities of fungi were 55% and 25%, respectively, which indicates that indoor environment provides more favorable survival conditions for the aerosolized fungi. Among the seasons, the highest indoor and outdoor culturability of fungi was observed in the fall. Cladosporium had a highest median value of culturability (38% and 33% for indoor and outdoor, respectively) followed by Aspergillus/Penicillium (9% and 2%) among predominant genera of fungi. Increased culturability of fungi inside the homes may have important implications because of the potential increase in the release of allergens from viable spores and pathogenicity of viable fungi on immunocompromised individuals.     

Carbofuran induced changes in breeding of a freshwater fish,Labeo rohita (Hamilton)

The effect of carbofuran, a carbamate pesticide, on the breeding performance of the freshwater fish Labeo rohita (Hamilton) has been investigated in the present study. Breeding of L. rohita was conducted after treatment with three sublethal concentrations, i.e. 0.06, 0.15 and 0.30 mg L^?1 of carbofuran for 96 h. The present investigation showed that the number of total eggs and total amount of eggs (litre per kg body weight) decreased significantly (p < 0.01) at all concentrations of carbofuran in comparison to controls, while the reduction in fertilization percentage at all concentrations of carbofuran was not significantly different from controls. The reduction in hatching percentage, the expected number of hatchlings, and the expected number of hatched larvae were significantly (p < 0.01) different between treated and control groups at all carbofuran concentrations. No significant differences for the 96 h survivability of hatched larvae were reported at all concentrations of carbofuran.     

Effect of cypermethrin on breeding performances of a freshwater fish,Labeo rohita (Hamilton)

Abstract

Concentrations of the related elements calcium, strontium, barium, and lead were determined in soil extract, consumer stomach contents, and consumers in lead polluted and unpolluted areas. Discrimination against the nonessential metals relative to the nutritious metal calcium, as the metals were transferred through a trophic pathway was determined. Discrimination of metals varied systematically as a function of degree of nonessential element similarity to calcium. The existence of systematic trends of discrimination may facilitate the assessment of natural levels of some toxic elements (e.g. lead) in organisms.     

Correlation of ambient inhalable bioaerosols with particulate matter and ozone: a two-year study

In this study, we have examined the relationships between the concentrations of ambient inhalable airborne fungi and pollen with PM10, PM2.5, ozone, organic carbon, selected trace metals (cadmium, copper, lead, and zinc), temperature, and relative humidity. The database was collected in Cincinnati, Ohio, USA, during two consecutive years. Measurements of all environmental variables were performed at the same site continuously 5 days a week except during winter months. The airborne concentrations of biological and non-biological pollutants ranged as follows: total fungi: 184-16 979 spores m(-3); total pollen: 0-6692 pollen m(-3); PM10: 6.70-65.38 microg m(-3); PM2.5: 5.04-45.02 microg m(-3); and ozone: 2.54-64.17 ppb. Higher levels of total inhalable fungi and particulate matter were found during fall and summer months. In contrast, total pollen concentration showed elevated levels in spring. Peak concentrations of ozone were observed during summer and beginning of fall. Our study concluded that several types of inhalable airborne fungi and pollen, particulate matter, and ozone could be positively correlated as a result of the atmospheric temperature influence.     

A LOW COST DRIP IRRIGATION SYSTEM FOR SMALL FARMERS IN DEVELOPING COUNTRIES1

ABSTRACT: In areas where water is scarce, drip irrigation provides the most efficient way to conserve irrigation water, but its cost of £1000 an acre is prohibitive for most small farmers in developing countries. The cost was reduced by 90 percent by (1) making dripper lines moveable, so that each line reaches ten rows instead of one; (2) replacing 25-cent emitters with simple 0.70 mm holes punched by a heated needle; and (3) using £3.00 off-the-shelf 20 liter containers with cloth filters in place of expensive filter systems. This reduced the cost of a half-acre system to £50. The low cost system was field tested in the hill areas of Nepal, and in mulberry cultivation in Andhra Pradesh, India. Uniformity of flow from emitters was 73–84 percent. Small farmers reported that the low cost trickle irrigation system cut labor requirements in half, and doubled the area irrigated by the same amount of water. The low cost drip system is likely to be widely adopted by small farmers in semi-arid and hilly regions.     

Assessment of phenol infiltration resilience in soil media by HYDRUS-1D transport model for a waste discharge site

The movement of contaminants through soil imparts a variety of geo-environmental problem inclusive of lithospheric pollution. Near-surface aquifers are often vulnerable to contamination from surface source if overlying soil possesses poor resilience or contaminant attenuation capacity. The prediction of contaminant transport through soil is urged to protect groundwater from sources of pollutants. Using field simulation through column experiments and mathematical modeling like HYDRUS-1D, assessment of soil resilience and movement of contaminants through the subsurface to reach aquifers can be predicted. An outfall site of effluents of a coke oven plant comprising of alarming concentration of phenol (4–12.2 mg/L) have been considered for studying groundwater condition and quality, in situ soil characterization, and effluent characterization. Hydrogeological feature suggests the presence of near-surface aquifers at the effluent discharge site. Analysis of groundwater of nearby locality reveals the phenol concentration (0.11–0.75 mg/L) exceeded the prescribed limit of WHO specification (0.002 mg/L). The in situ soil, used in column experiment, possess higher saturated hydraulic conductivity (K _S ?=?5.25?×?10^?4 cm/s). The soil containing 47 % silt, 11 % clay, and 1.54 % organic carbon content was found to be a poor absorber of phenol (24 mg/kg). The linear phenol adsorption isotherm model showed the best fit (R ²?=?0.977, RMSE?=?1.057) to the test results. Column experiments revealed that the phenol removal percent and the length of the mass transfer zone increased with increasing bed heights. The overall phenol adsorption efficiency was found to be 42–49 %. Breakthrough curves (BTCs) predicted by HYDRUS-1D model appears to be close fitting with the BTCs derived from the column experiments. The phenol BTC predicted by the HYDRUS-1D model for 1.2 m depth subsurface soil, i.e., up to the depth of groundwater in the study area, showed that the exhaustion point was reached within 12 days of elapsed time. This clearly demonstrated poor attenuation capacity of the soil to retard migration of phenol to the groundwater from the surface outfall site. Suitable liner, based on these data, may be designed to inhibit subsurface transport of phenol and thereby to protect precious groundwater from contamination.     

Renewable hydrocarbons through biomass hydropyrolysis process: challenges and opportunities

Considering the current issues of carbon control and the desire to become less dependent on imported oil, the utilization of renewable hydrocarbons for the reduction of CO₂ emission and production of liquid synthetic fuels/chemicals has been proposed by researchers worldwide. Efforts to make chemicals/fuels from renewable resources have escalated over the past few years. Biomass-based renewable hydrocarbons are considered to be one of the sources with the highest potential to contribute to the energy needs of modern society for both developed and developing economies worldwide. Fast pyrolysis is becoming an important thermal route to convert biomass to liquid fuels; however, the raw bio-oils obtained have a number of negative properties such as high acidity, high water content, and variable viscosity over time. To overcome this problem and produce bio-oil of good quality, process of ‘hyropyrolysis’ has been developed. The scope for using pyrolysis under hydrogen pressure and also by process of hydropyrolysis followed by in situ hydroconversion of vapors to give oils with much lower oxygen contents has been reviewed.     

Effect of pressure on the hydropyrolysis of Jatropha seed deoiled cake

The necessity to move towards a sustainable economy is increasing day by day owing to various problems like climate change, increasing crude oil prices, etc. In this line, hydropyrolysis of Jatropha seed deoiled cake has been carried out at various pressures of hydrogen (1, 20, 40 and 52 bar) at 450 °C. With an increase in pressure under the experimental conditions of present study from 1 to 40 bar, the yield of bio-oil is found to have increased and beyond 40 bar the bio-oil yields have decreased. It has been observed that the liquid bio-oil yield is highest at 17 wt% at 40 bar. The FTIR spectrum of the bio-oil and char at 40 bar shows maximum functionality, indicating the clear opening of the macromolecular structure. The EDAX analysis of the hydropyrolysis char obtained at 40 bar pressure show a maximum of 85 wt% carbon and minimum of oxygen 13 wt%.     

Predicted growth of world urban food waste and methane production.

Landfill gas emissions are one of the largest anthropogenic sources of methane especially because of food waste (FW). To prevent these emissions growing with world population, future FW best management practices need to be evaluated. The objective of this paper was therefore to predict FW production for 2025 if present management practices are maintained, and then, to compare the impact of scenario 1: encouraging people to stay in rural areas and composting 75% of their FW, and; of scenario 2, where in addition to scenario 1, composting or anaerobically digesting 75% of urban FW (UFW). A relationship was established between per capita gross domestic product (GDP) and the population percentage living in urban areas (%UP), as well as production of municipal solid waste (MSW) and UFW. With estimated GDP and population growth per country, %UP and production of MSW and UFW could be predicted for 2025. A relatively accurate (R(2) > 0.85) correlation was found between GDP and %UP, and between GDP and mass of MSW and FW produced. On a global scale, MSW and UFW productions were predicted to increase by 51 and 44%, respectively, from 2005 to 2025. During the same period, and because of its expected economic development, Asia was predicted to experience the largest increase in UFW production, of 278 to 416 Gkg. If present MSW management trends are maintained, landfilled UFW was predicted to increase world CH4 emissions from 34 to 48 Gkg and the landfill share of global anthropogenic emissions from 8 to 10%. In comparison with maintaining present FW management practices, scenario 1 can lower UFW production by 30% and maintain the landfill share of the global anthropogenic emissions at 8%. With scenario 2, the landfill share of global anthropogenic emissions could be further reduced from 8 to 6% and leachate production could be reduced by 40%.     

Economics of dairy waste use as fertilizer in central Texas

Dairy manure is an unavoidable natural, but negative, byproduct of milk production. Its nitrogen, phosphate, and potash contents represent a potential substitute for commercial fertilizers on field crops. In the absence of subsidies, manure transportation and land application costs limit its utilization as a substitute for chemical fertilizer. The results from a study of the economics of manure use in Central Texas suggest that, at the current costs for loading, hauling, and spreading, dairy manure cannot be economically transported from surplus to deficit areas within the study area. The estimated breakeven transport distance for manure application to four crops varied from 28 to 41 km; however, the distances between manure-surplus and manure-deficit counties in the study region varied from 40 to 90 km. An analysis of potential subsidies paid by the government or dairy farmers showed that the breakeven distance could increase by up to 30 km. A decrease in the assumed moisture content of the manure from 50% to 40% is shown to increase the breakeven distance by 10 km. The study suggests that dairy manure loading, transportation, and land application, with appropriate subsidies or reductions in moisture content, has the potential to be profitably substituted for chemical fertilizers.