Histoenzymological study on the toxicity of copper sulphate in the digestive glands of Lymnaea luteola

During 24 and 48 hr of exposure, the digestive glands of Lymnaea treated with a lethal concentration of 0.038 mgl(-1) CuSO4 revealed intense activity of acid phosphatase in perilobular margin. On the other hand, same area of the gland showed moderate activity of ATPase during 24 and 48 hr of exposure. However, alkaline phosphatase showed average activity in perialveolar region and perilobular margin during 24 and 48, and 72 hr of exposure respectively The changes in the activity of these enzymes were nonsignificant in alveolar margin and perialveolar region of the gland. It is interesting to note moderate activity of acid phosphatase in perialveolar region during 24 hr of exposure.     

Monitoring of methoxychlor residues in the Athabasca River system in northern Alberta after treatment for control of black fly larval populations

Methoxychlor (2,2-bis(p-methoxyphenyl)-1,1,1-trichloroethane) was used in the Athabasca River in northern Alberta for the control of black fly larvae, Simulium arcticum, during May to July of 1981 to 1987. Samples of river water and sediment were analyzed for methoxychlor residues each year as part of Alberta Environment's program to assess environmental impact and monitor compliance with issued permits. During 1985 fish samples were also collected at various sites downstream and upstream of the point of application of methoxychlor. This paper summarizes the residue data obtained by analysing these fish, sediment and water samples collected from the Athabasca River system during the years 1981 to 1987.     

Assessment of urban air pollution and it's probable health impact

The present study deals with the quantitative effect of vehicular emission on ambient air quality during May 2006 in urban area of Lucknow city. In this study SPM, RSPM, SO2, NOx and 7 trace metals associated with RSPM were estimated at 10 representative locations in urban area and one village area for control. Beside this, air quality index (AQI), health effects of different metals and mortality were assessed. The 24 hr average concentration of SPM, RSPM, SO2 and NOx was found to be 382.3, 171.5, 24.3 and 33.8 microg m(-3) respectively in urban area and these concentrations were found to be significantly (p < 0.01) higher by 94.8, 134.8, 107.4 and 129.6% than control site respectively The 24 hr mean of SPM and RSPM at each location of urban area were found to be higher than prescribed limit of National Ambient Air Quality Standard (NAAQS) except SPM for industrial area. The 24 hr mean concentration of metals associated with RSPM was found to be higher than the control site by 52.3, 271.8, 408.9, 75.81, 62.7, 487.54 and 189.5% for Fe, Cu, Pb, Zn, Ni, Mn and Cr respectively. The inter correlation of metals Pb with Mn, Fe and Cr; Zn with Ni and Cr; Ni with Cr; Mn with Fe and Cu with Cr showed significant positive relation either at p < 0.05 or p < 0.01 level. Metals Pb, Mn and Cr (p < 0.01) and Cu (p < 0.05) showed significant positive correlation with RSPM. These results indicate that ambient air quality in the urban area is affected adversely due to emission and accumulation of SPM, RSPM, SO2, NOx and trace metals. These pollutants may pose detrimental effect on human health, as exposure of these are associated with cardiovascular and respiratory diseases, neurological impairments, increased risk of preterm birth and even mortality and morbidity.     

Environmental radon studies using solid state nuclear track detectors

The results of radon activity recorded in 70 dwellings of Nurpur area, Kangra district, Himachal Pradesh, India are reported. LR-115 Type 2 films in the bare mode were exposed for four seasons of three months each covering a period of one year for the measurement of indoor radon levels. The calibration constant of 0.020 tracks cm(-2) d(-1) per Bq m(-3) has been used to express radon activity in Bq m(-3). The annual average indoor radon concentrations in 17 different villages of the area are found to vary from 168+/-46 to 429+/-71. Most of the indoor radon values lie in the range of action levels (200-600 Bq m(-3)) recommended by International Commission on Radiological Protection.     

Developing, designing, and testing artificial set of lithologies for soil-aquifer treatment (SAT) systems without soil, using geosynthetic materials

Conventional soil-aquifer treatment (SAT) systems comprise of natural lithological sections up to the depth of zone of saturation or dried aquifers, which through geopurification process recharge the aquifers using domestic or industrial wastewaters. Such SAT systems have low infiltration capacity and frequently face the clogging problems, which causes environment hazards in the local areas. Under this study, three artificial set of lithologies (Lithology I, Lithology II, and Lithology III) were generated without using soil. Each one meter set of lithology was generated within a transparent cylindrical pipe of diameter 15 cm. Each lithology was equipped with nonwoven geotextile and geogrid material at different levels and comprises of coarse aggregate, fine aggregate, coarse sand, medium sand, and fine sand. Use of geotextile material within the artificial lithology shows approximately 8–10 times enhancement in the filtration capacity of the tested lithologies. Municipal wastewater (after primary treatment) was used to test the Lithologies I, II, and III. Between 100–200 l of wastewater was passed through each set of lithology everyday for seven days. Different water quality parameters such as pH, turbidity, electrical conductivity, fluoride, total suspended solids, biological oxygen demand, dissolve oxygen and carbon oxygen demand, chloride, and manganese were analyzed before and after passing through the lithologies everyday. One meter set of artificial lithologies have successfully reduced the concentration of measured water quality parameters between 60 and 93 %, without clogging. Lithology III equipped with superficial fine sand layer and two set of nonwoven geotextile has successfully removed 70–93 % concentration of wastewater. This study aims to demonstrate that a SAT system equipped with geotextile and without soil is more effective then the prevailing SAT systems. Study also proposed designs of SAT systems, which can be formed at unfavorable sites using abundant dry wells in which artificial set of lithologies can be used.     

The use of ultra filtration in trace metal speciation studies in sea water

During this work, size fractionation technique "ultra filtration" is used in speciation studies of trace elements in the coastal sea water. Filtration is the most commonly used method to fractionate trace metal species, but often only "dissolved" and "particulate" fraction. The purpose of the present study is to determine colloidal and suspended particulate concentrations of Fe, Zn, Cu, Ni, and Mn in sea water. Suspended particulate matter were separated in three different size groups namely (>2.7 microm, <2.7->0.45 microm and <0.45->0.22 microm) by suction filtration using cellulose acetate and nitrate filter membranes. Thereafter to concentrate the solution with colloidal particle <0.22 microm-1.1 nm (0.5 k Nominal Molecular Weight cut-off Limit {NMWL}), the solution obtained from filtration through <0.22 microm, is sequentially passed through the ultra-filtration membranes having pore diameters of 14 nm (300 k NMWL), 3.1 nm (50 k NMWL), 2.2 nm (30 k NMWL), 1.6 nm (10 k NMWL) and 1.1 nm (0.5 k NMWL) by using Stirred Ultra-filtration Cells, operating in concentration mode. The concentration of Fe, Zn, Cu, Ni, and Mn were measured in suspended and dissolved fraction by ion chromatography, ICP-AES and Atomic Absorption Spectrometer. The salinity of the solution in various dissolved fractions of sequential filtration varies between 30.89-34.22 parts per thousand. The maximum concentrations of colloidal Zn, Cu, Ni and Mn in dissolved fraction were in <2.2->1.6 nm fraction. In case of Fe, colloidal fractions <2.2->1.6 nm and <1.6-<1.1 nm shows higher concentration. The concentration of Zn, Cu, Ni and Mn increase with decrease in size in suspended particulate matter, while the reverse is observed in case of Fe. This size separation data that specifies the partitioning of metals between dissolved and suspended solid phases is necessary for developing physically based models of metal transport in aquatic system.     

Health and environmental costs of pesticide use in vegetable farming in Nepal

There is a growing concern of pesticide risks to human health, natural environment and ecosystems. Many previous economic valuations have accounted health aspects or environmental components, but rarely combined; thus, overall risk assessment is partially distorted. The study, conducted close to the capital of Nepal, addressed the health effects of pesticides on small-scale farmers and evaluated the monetary risks of pesticide use on human health and environmental resources. We also aim to establish the relationships among valuation methods. The paper adopts cost of illness, defensive expenditure and contingent valuation willingness to pay approach. The study concluded that the methods used for valuing pesticide risks to human and environmental health are theoretically consistent. The exposed individuals are likely to bear significant economic costs of exposures depending on geographical location, pesticide use magnitudes and frequency. Individuals are willing to pay between 53 and 79% more than the existing pesticide price to protect their health and environment. The integrated pest management training is less likely to reduce health costs of pesticide exposure, although it leads to higher investment in safety measures.     

Estimation of radon exhalation rate, natural radioactivity and radiation doses in fly ash samples from Durgapur thermal power plant, West Bengal, India

Coal and its by products often contain significant amounts of radionuclides, including uranium which is the ultimate source of the radioactive gas radon. Burning of coal and the subsequent emission to the atmosphere cause the re-distribution of toxic trace elements in the environment. Due to considerable economic and environmental importance and diverse uses, the collected fly ash has become a subject of worldwide interest in recent years. In the present study, radon exhalation rate and the activity concentration of (238)U, (232)Th and (40)K radionuclides in fly ash samples from Durgapur thermal power plant (WB) have been measured by "Sealed Can technique" using LR-115 type II detectors and a low level NaI (Tl) based gamma ray spectrometer, respectively. Radon exhalation rate varied from 360.0 to 470.0 mBq m(-2)h(-1) with an average value of 406.8 mBq m(-2)h(-1). Activity concentrations of (238)U ranged from 84.8 to 126.4 Bq kg(-1) with an average value of 99.3Bqkg(-1), (232)Th ranged from 98.1 to 140.5 Bq kg(-1) with an average value of 112.9 Bq kg(-1) and (40)K ranged from 267.1 to 364.9 Bq kg(-1) with an average value of 308.9 Bq kg(-1). Radium equivalent activity obtained from activity concentrations is found to vary from 256.5 to 352.8 Bq kg(-1) with an average value of 282.5 Bq kg(-1). Absorbed gamma dose rates due to the presence of (238)U, (232)Th and (40)K in fly ash samples vary in the range 115.3-158.5 nGy h(-1) with an average value of 126.4 nGy h(-1). While the external annual effective dose rate varies from 0.14 to 0.19 mSv y(-1) with an average value of 0.15 mSv y(-1), effective dose equivalent estimated from exhalation rate varies from 42.5 to 55.2 microSv y(-1) with an average value of 47.8 microSv y(-1). Values of external hazard index H(ex) for the fly ash samples studied in this work range from 0.69 to 0.96 with a mean value of 0.77.     

Promoting e-mobility in India: challenges,framework, and future roadmap

The purpose of the research is to identify the critical challenges that are impeding the adoption of e-mobility in India. It also aims to give a roadmap how to address these challenges while taking into considerations concerns of all the relevant stakeholders. Based on an in-depth literature review, an exploratory research design is employed to delve deep into various aspects of e-mobility. This is followed by a three-phase Delphi technique to identify and rate the e-mobility challenges in the Indian context. The study successfully identifies four different categories of challenges and proposes integrative framework for e-mobility. Further, the research goes on to lay out the future roadmap for mass adoption of electric vehicles (EVs) in India. The research is novel in terms of presenting a holistic viewpoint on e-mobility in India. Its originality lies in identifying the major inhibitors obstructing EVs adoption in India and then suggesting the roadmap how to overcome these impediments for mass adoption of e-mobility.