Changes in the grassland-forest boundary at Ta-Ta-Chia long term ecological research (LTER) site detected by stable isotope ratios of soil organic matter

The carbon isotope analysis [delta13C values] of organic samples can be a useful research in ecological studies because delta13C values are indicative of the plant source. This study investigated the changes in plant communities along the grassland-forest boundary in the alpine forest at Ta-Ta-Chia long term ecological research (LTER) site in central Taiwan using carbon isotope data. The aim of this study was focused on the forest fire affected the change of vegetation community. Four pedons from grassland dominated by Miscanthus transmorrisonensis (pedons 1 and 2), transition zone by Tsuga and Yushania nittakeyamensis (pedon 3), and forest zone by Tsuga and nittakeyamensis (pedon 4) were examined. Soil organic matter (SOM) delta13C values in the upper soil horizon were similar to delta13C values of the overlaying vegetation types. This indicates that the boundary between these plant communities remained the same in the past decades. The delta13C values of the grassland SOM ranged from -19.4 per thousand to -24.1 per thousand, showing decrease with soil depth. This suggests that C4 plants (transmorrisonensis) have replaced C3 plants of Tsuga and nittakeyamensis. The delta13C values of the Tsuga forest area (pedon 4) range from -27.0 per thousand to -23.5 per thousand and showed only slight change with soil depth, implying that C3 plants have remained the major species in the forest.     

Pyrolysis kinetics and residue characteristics of petrochemical industrial sludge

This study investigated the pyrolysis characteristics of sludge from wastewater treatment plants in the petrochemical industry and focused on the pyrolysis kinetics, elemental composition of residue, and volatile organic compounds (VOCs) of exhaust gas. As pyrolysis temperature increased to 773 K, the increasing rate of crude oil production tended to a stable condition. The result indicated that the optimal temperature of crude oil and water mixed production was 773 K. When pyrolysis temperature increased from 673 to 973 K, carbon, oxygen, nitrogen, and hydrogen concentrations of residue decreased and the sulfur concentration of residue increased. The concentrations of benzene, toluene,ethylbenzene, and styrene increased by the increasing pyrolysis temperature. We found that the reaction order of sludge pyrolysis was 2.5 and the activation energy of the reaction was 11.06 kJ/mol. We believe that our pyrolysis system is transitional between devolatilization and combustion.     

Practical Perspectives of 1,4‐Dioxane Investigation and Remediation

1,4‐Dioxane (dioxane) is a contaminant of emerging concern that is classified by the U.S. Environmental Protection Agency as a likely human carcinogen. Dioxane has been used as a minor or major ingredient in many applications, and is also generated as an unwanted by‐product of industrial processes associated with the manufacturing of polyethylene, nonionic surfactants, and many consumer products (cosmetics, laundry detergents, shampoos, etc.). Dioxane is also a known stabilizer of chlorinated solvents, particularly 1,1,1‐trichloroethane, and has been commonly found comingled with chlorinated solvent plumes. Dioxane plumes at chlorinated solvent sites can complicate site closure strategies, which to date have not typically focused on dioxane. Aggressive treatment technologies have greatly advanced and are clearly capable of achieving lower parts per billion cleanup criteria using ex situ advanced oxidation processes and sorption media. In situ chemical oxidation has also been demonstrated to effectively remediate dioxane and chlorinated solvents. Other in situ remedies, such as enhanced bioremediation, phytoremediation, and monitored natural attenuation, have been studied; however, their ability to achieve cleanup levels is still somewhat questionable and is limited by co‐occurring contaminants. This article summarizes and provides practical perspectives on dioxane analysis, plume stability relative to other contaminants, and the development of investigation tools and treatment technologies.     

Assessment of mutagenic potency of source water treated by ozone and adsorption processes

This research utilized the Ames test to determine the mutagenicity of water treated by advanced processes, including ozonation and granular activated carbon (GAC). Raw water samples for this research included those obtained from the Pan Hsin waterworks as well as samples containing humic acids. Treated samples were collected from the pilot‐scale advanced treatment plant. The Ames test was used to measure the mutagenicity of the water after each treatment process. For the Pan Hsin raw water samples treated with ozone or GAC, it was indicated that, regardless of whether samples were preozonated or not, they all showed a mutagenic potency less than 2 once the S9 enzyme was added. This level of mutagenicity is insignificant. The prepared humic acid samples, on the other hand, demonstrated a significant reduction in mutagenicity after the pre‐ozonation process, indicating that preozonation can lower the degree of mutagenicity. Furthermore, the mutagenicity of the prepared humic acid samples gradually decreased after the advanced treatment process. However, when chlorine was added later to these samples, the mutagenicity increased again. This research shows that the use of O3/GAC processes to treat water can successfully lower mutagenicity, indicating a great potential for applications in the treatment of drinking water.     

Relationship between chlorine consumption and chlorination by-products formation for model compounds

The objective of this research is to investigate the relationship between chlorine decay and the formations of disinfection by-products (DBP), including trichloromethane (TCM) and chloroacetic acid (CAA) in the presence of four model compounds, i.e., resorcinol, phloroglucinol, p-hydroxybenzoic acid, and m-hydroxybenzoic acid. The chlorine degradation in model compounds with OH and/or COOH functional groups were rapid after chlorination. The TCM yields of carboxylic group substituted compounds (3-hydroxybenzoic acid [3-HBA], 4-hydroxybenzoic acid [4-HBA]) were found to be lower than that of the m-dihydroxy substituted compounds. Phloroglucinol, with one more OH substitution group than resorcinol, tends to form significant amounts of CAA after chlorination. However, it was observed that with the COOH substitution of 3-HBA and 4-HBA tend to exhibit more CAA formation potential than resorcinol. The developed parallel second and first-order reaction model for chlorine demand has been successfully utilized for TCM, CAA and DBP formation modeling. A high correlation between CAA and TCM was observed for the model compounds.     

Degradation of carbofuran in water by solar photocatalysis in presence of photosensitizers

The effect of the presence of photosensitizers, methylene blue (MB) and rose Bengal (RB), on the degradation of carbofuran (2,3-dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate) in water in a solar photocatalytic system was investigated. It was found that as compared to MB, RB generally showed a stronger effect on the decomposition of carbofuran under comparable conditions. Among the conditions studied, adding 2 x 10(-6) M of RB, that corresponding to 2% of the initial concentration of carbofuran solution in the system, rendered the most effective degradation of carbofuran. As a result, a carbofuran removal percentage of 69.9%, a mineralization efficiency of 28.0%, and a microtoxicity reduction of 65.0% could be achieved. The degradation and mineralization of carbofuran was found to follow the pseudo-first order reaction kinetics. The decomposition mechanism of carbofuran was further investigated through identification of the intermediates to elaborate the influence of dye photosensitizer on the solar photocatalysis of carbofuran in water. On the basis of the intermediates identified, including carbofuran phenol, 3-hydroxy carbofuran phenol, and substituted alcohols (3-phenoxy 1-propanol, 2-ethyl 1-hexanol, 2-butoxyl ethanol), it appears that hydrolysis and hydroxylation were the two key mechanisms for decomposing carbofuran during the process of solar photocatalysis with the aid of dye photosensitizer.     

A CRAZY IDEA ON URBAN WATER MANAGEMENT?1

ABSTRACT. High percentage of imperviousness in the city is the source of storm runoff. Roof area contributes significantly to the imperviousness. An attempt to make use of roofs as urban flood control device and water conservation measure is advocated. Two different schemes, one for built-up industrial-commercial area, the other for residential area, are suggested. The former utilizes the roof as detention reservoir for flood control, the latter employs recharge pit to convert runoff into ground water resource. The proposed schemes are not only hydrologically, hydraulically and structurally sound but also economically feasible. It is worth considering in the future planning of urban renewal and urban development.     

The life table and competing risks

The concept of the life table originated in longevity studies of man, where it was always presented as a subject peculiar to public health, demography, and actuarial science. As a result, its development has not received sufficient attention in the field of statistics. Actually, the problems of mortality studies are similar to those of reliability theory and life testing, and they may be described in terms familiar to the statistically oriented mind. From a statistical point of view, human life is a random experiment and its outcome, survival or death, ss subject to chance. The life table systematically records the outcomes of many such experiments for a large number of individuals over a period of time. Thus, the quantities in the table are random variables subject to established statistical analysis. The purpose of this presentation is to discuss the life table from a statistical viewpoint.     

SELECTED NUTRIENTS AND HEAVY METALS IN SEWAGE SLUDGE FROM NEW JERSEY POTWs1

ABSTRACT: In order to determine appropriate application rates and to ensure low pollutant levels in sewage sludge, knowing the chemical composition of sewage sludge is of great importance in a land application program. The objective of this study is to evaluate the variability of selected chemical characteristics of sewage sludge from New Jersey publicly owned treatment works (POTWs). Measurements of total Kjeldahl nitrogen (TKN), NH₄⁺‐N, P, K⁺, Cd, Cu, Pb, and Zn reported by 98 facilities in the 1996 and 1997 New Jersey Sludge Quality Assurance Regulations (SQAR) reports were statistically analyzed. Sewage sludge from Category 5 POTWs (greater than 10 percent industrial input) showed higher Cd, Cu, and Pb concentrations than Category 3 and Category 4 facilities (less than 10 percent industrial input). Even though only two years of data were analyzed, there was an indication that Cd and Pb concentrations in sewage sludge are decreasing with time. The yearly mean of only a few facilities exceeded the federal pollution concentration limits (40 CFR Part 503, Table 3). Phosphorus and Cd values showed the highest variability within facilities based on the coefficient of variation. Due to the variability of sewage sludge constituents, the use of the yearly rolling mean of nutrient concentrations to determine application rates was considered inadequate. An actual analysis of the sewage sludge to be applied is more appropriate to determine application rates than historical data.     

RESERVOIR TROPHIC STATE EVALUATION USING LANISAT TM IMAGES1

ABSTRACT: Reservoir water quality is traditionally monitored and evaluated based on field data. Collecting and analyzing field water quality data are costly and time consuming tasks, and whether a limited number of field data truly characterize the spatial variation of the trophic state within a vast water body is often disputed. In this study we utilize Landsat TM data to estimate the water quality and trophic state of the Te‐Chi reservoir in Central Taiwan. A modified multi‐parameter model of Carlson's trophic state index (TSI) was developed for the Te‐chi reservoir. Water quality parameters (concentration of chlorophyll‐a, total phosphorous measurement, and secchi disk depth) required by the model are found to have high correlations with combinations of TM bands. Therefore, TM data are used to map the trophic state of the reservoir. TM‐derived TSI maps of the reservoir reveal that, in summer, the trophic state in the reservoir generally improves from upstream to downstream and that zones of distinct trophic state exist. A trophic state index based on secchi disk depth may give erroneous values in the upstream section of the reservoir pool due to high sediment concentration in the reservoir inflow. We conclude that the Te‐Chi reservoir is eutrophic or worse in summer and meso‐eutrophic in winter. Implementation of best management practices to reduce nonpoint source pollution in the upstream watershed is highly recommended. This study demonstrates the capability of mapping the trophic state in impounded water bodies using the Landsat TM data.