Potential of anaerobic digestion for material recovery and energy production in waste biomass from a poultry slaughterhouse

This study was carried out to assess the material and energy recovery by organic solid wastes generated from a poultry slaughterhouse. In a poultry slaughterhouse involving the slaughtering of 100,000 heads per day, poultry manure & feather from the mooring stage, blood from the bleeding stage, intestine residue from the evisceration stage, and sludge cake from the wastewater treatment plant were discharged at a unit of 0.24, 4.6, 22.8, and 2.2 Mg day^?1, consecutively. The amount of nitrogen obtained from the poultry slaughterhouse was 22.36 kg 1000 head^?1, phosphate and potash were 0.194 kg 1000 head^?1 and 0.459 kg 1000 head^?1, respectively. As regards nitrogen recovery, the bleeding and evisceration stages accounted for 28.0% and 65.8% of the total amount of recovered nitrogen. Energy recovered from the poultry slaughterhouse was 35.4 N m³ 1000 head^?1 as CH₄. Moreover, evisceration and wastewater treatment stage occupied 88.1% and 7.2% of the total recovered CH₄ amount, respectively.     

Interpreting complex geochemistry of groundwater in a coastal paddy field near a mine using isotopic signatures of sulfate and water

Environmental Geochemistry and Health - In the area around the abandoned Seoseong mine, South Korea, coastal paddy fields undergo seawater intrusion and possible sulfate reduction. Here, channel...     

Seasonal flux of nonylphenol in Han River, Korea

In order to understand the behavior of nonylphenol (NP) in Han River, water, suspended particle and sediment samples were analyzed during summer, autumn and winter. Concentrations of nonylphenol in water ranged from 23.2 to 187.6 ng/l, in suspended particle from 6.8 to 190.8 ng/l and in sediment from 25.4 to 932.0 ng/gdrywt. An increasing trend in the concentration is noticed in all matrices along down the river. In case of water and suspended particle, concentrations were higher in warmer season than in colder season. Percentage of nonylphenol in the suspended particle phase decreased from 67% to 28% with decreasing temperature in water. A reasonable correlation (R2 = 0.63) was obtained for water and suspended particle. The partition coefficient Log Kp is 4.8. No seasonal variation of the concentration in sediment is noticed in this study.     

Influence of a municipal solid waste incinerator on ambient air and soil PCDD/Fs levels

To examine the influence of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) emissions from a municipal solid waste incinerator (MSWI) on the environment, we measured the levels of PCDD/Fs in ambient air and soil samples collected near a MSWI in Bucheon, Korea. The PCDD/Fs concentrations in the ambient air samples ranged from 0.22 to 1.16 pg I-TEQm(-3) (13.39-75.16 pg m(-3)), with an average of 0.66 pg I-TEQ m(-3) (35.62 pg m(-3)). The soil samples contained between 1.25 and 74.98 pg I-TEQ g(-1) (38.15-3,303.33 pg g(-1)), with an average of 19.06 pg I-TEQ g(-1) (1,077.11 pg g(-1)). These levels were higher than those previously reported by other investigators in a number of surveys. The furan homologues predominated in the air samples and some soil samples, and the soil PCDD/Fs levels decreased with increasing distance from the MSWI. Comparison of the homologue patterns and a multivariate statistical analysis showed that PCDD/Fs emission from the MSWI directly affected the pattern of PCDD/Fs in air, while the PCDD/Fs patterns in soil differed according to the location relative to the MSWI, roads, and construction sites. These results collectively indicate that the MSWI was the major PCDD/Fs emission source in this area, but that unidentified combustion sources and vehicles might influence the environment to some extent.     

Microwave pretreatment for enhancement of phosphorus release from dairy manure

Both the advanced oxidation process (AOP) using a combination of hydrogen peroxide addition and microwave heating (H2O2/microwave), and the microwave heating process were used for solubilization of phosphorus from liquid dairy manure. About 80% of total phosphate was released into the solution at a microwave heating time of 5 min at 170 degrees C. With an addition of H2O2, more than 81% of total phosphate could be released over a reaction period of 49 h at ambient temperature. The AOP process could achieve up to 85% of total phosphate release at 120 degrees C. The results indicated that both the microwave, and the AOP processes could effectively release phosphate from liquid dairy manure. These processes could serve as pretreatments for phosphorus recovery from animal wastes, and could be combined with the struvite crystallization process to provide a new approach in treating animal wastes.     

Isolation and Characterization of <Emphasis Type="Italic">Bacillus cereus</Emphasis> Bacteriophages from Foods and Soil

The aim of this study was to isolate and characterize Bacillus cereus bacteriophages of various origins. Twenty-seven bacteriophages against B. cereus were isolated from various Korean traditional fermented foods and soils. Plaque size, transmission electron microscopy, virulence profile, and in vitro lytic activity of bacteriophage isolates were examined. Transmission electron microscopy confirmed B. cereus bacteriophages belonging to the family Siphoviridae. Among B. cereus bacteriophages with broad host range, 18 isolates (66.7%) did not harbor any B. cereus virulence factors. Among them, bacteriophage strain CAU150036, CAU150038, CAU150058, CAU150064, CAU150065, and CAU150066 effectively inhibited B. cereus in vitro within 1 h. Therefore, they are considered potential candidates for controlling the contamination of B. cereus in food or other applications.     

Crustacean habitat potential mapping in a tidal flat using remote sensing and GIS

To make a macrofaunal (crustacean) habitat potential map, the spatial distribution of ecological variables in the Hwangdo tidal flat, Korea, was explored. Spatial variables were mapped using remote sensing and a geographic information system (GIS) combined with field observations. A frequency ratio (FR) and logistic regression (LR) model were employed to map the macrofauna potential area for the Ilyoplax dentimerosa, a crustacean species. Spatial variables affecting the tidal macrofauna distribution were selected based on abundance and biomass and used within a spatial database derived from remotely sensed data of various types of sensors. The spatial variables included the intertidal digital elevation model (DEM), slope, distance from a tidal channel, tidal channel density, surface sediment facies, spectral reflectance of the near infrared (NIR) bands and the tidal exposure duration. The relation between the I. dentimerosa and each spatial variable was calculated using the FR and LR. The species was randomly divided into a training set (70%) to analyse habitat potential using FR and LR and a test set (30%) to validate the predicted habitat potential map. The relations were overlaid to produce a habitat potential map with the species potential index (SPI) value for each pixel. The potential habitat maps were compared with the surveyed habitat locations such as validation data set. The comparison results showed that the LR model (accuracy is 85.28%) is better in prediction than the FR (accuracy is 78.96%) model. The performance of models gave satisfactory accuracies. The LR provides the quantitative influence of variables on a potential habitat of species; otherwise, the FR shows the quantitative influence of a class in each variable. The combination of a GIS-based frequency ratio and logistic regression models and remote sensing with field observations is an effective method to determine locations favorable for macrofaunal species occurrences in a tidal flat.     

Microalgae Scenedesmus obliquus as renewable biomass feedstock for electricity generation in microbial fuel cells （MFCs）

Renewable algae biomass, Scenedesmus obliquus, was used as substrate for generating electricity in two chamber microbial fuel cells （MFCs）. From polarization test, maximum power density with pretreated algal biomass was 102mW·m^2 （951mW·m^3） at current generation of 276mA·m^-2. The individual electrode potential as a function of current generation suggested that anodic oxidation process of algae substrate had limitation for high current generation in MFC. Total chemical oxygen demand （TCOD） reduction of 74% was obtained when initial TCOD concentration was 534mg · L^-1 for 150 h of operation. The main organic compounds of algae oriented biomass were lactate and acetate, which were mainly used for electricity generation. Other byproducts such as propionate and butyrate were formed at a negligible amount. Electrochemical Impedance Spectroscopy （EIS） analysis pinpointed the charge transfer resistance （112Ω ） of anode electrode, and the exchange current density of anode electrode was 1214 nA·cm^-2.     

Effect of complex shape of pier foundation exposure on time development of scour

Environmental Fluid Mechanics - Local pier scour has been recognized as one of the most significant causes of bridge failures. Despite numerous studies on the subject of local pier scour have been...