Degradation kinetics and products of triazophos in intertidal sediment

This work presents taboratory studies on the degradation of triazophos in intertidat sediment. The overall degradations were found to follow the first-order decay model. After being incubated for 6 d, the percentage of degradations of triazophos in unsterilized and sterilized sediments were 94.5% and 20.5%, respectively. Between the temperatures of 15℃ and 35℃, the observed degradation rate constant（kob,d） enhanced as the incubation temperature increased. Triazophos in sediment degraded faster under aerobic condition than under anaerobic one. The water content of sediment had little influence on the degradation when it was in the range of 50%-100%. The values of kobsd decreased with increasing initial concentration of triazophos in sediment, which could result from the microorganism inhibition by triazophos. Four major degradation products, o, o-diethyl phosphorothioic acid, monoethyl phosphorothioic acid, phosphorothioic acid, and 1-phenyl-3-hydroxy-1, 2,4-triazole, were tentatively identified as their corresponding trimethylsilyl derivatives with a gas chromatography-mass spectrometer. The possible degradation pathway of triazophos in intertidal sediment was proposed. The results revealed that triazophos in intertidal sediment was relatively unstable and coutd be easily degraded.     

我国热带地区胶—茶—鸡农林复合系统物质循环研究

以海南省文昌市典型的胶—茶—鸡农林复合模式为研究对象 ,以单作胶园、胶茶间作园为对照 ,采用定量研究与定性分析相结合的方法 ,研究其物质循环规律。结果表明 ,胶—茶—鸡农林复合系统的氮、磷输入、输出量最大 ,系统外物质投入率比另两系统明显减少 ,系统内养分循环量增加 ,因此 ,该系统具有较合理的物质循环结构。     

LPWCO method for the treatment of high concentrated organic wastewater

Based on wet air oxidation (WAO) and Fenton reagent, thispaper raises a new low pressure wet catalytic oxidation(LPWCO)which requires low pressure for the treatment of highlyconcentrated and refractory organic wastewater. Compared withgeneral wet air oxidation, the pressure of the treatment(0.1-0.6MPa) is only one of tens to percentage of latter(3.5-10MPa). Inaddition, its temperature is no more than 180℃.Compared withFenton reagent, while H2O2/COD(weight ratio) less than 1.2, theremoval of COD in the treatment is over twenty percents more thanFenton's even the value of COD is more than 14000mg/L. In thispaper, we study the effect factor of COD removal and the mechanismof this treatment. The existence of synergistic effect (catalytic oxidation and carbonization) for COD removal in H2SO4-Fenton reagent system under the condition of applied pressure and heating (0.1-0.6MPa, 104-165℃) was verified. The best condition of this disposal are as follows:H2O2/COD(weight ratio)=0.2-1.0, Fe2+ 0.6×10-3 mol, H2SO4 0.5mol, COD>1×104mg/L, the operating pressure is 0.1-0.6MPa and temperature is 104-165℃. This method suit to dispose the high-concentrated refractory wastewater, especially to the wastewater containing H2SO produced in the manufacture of pesticide, dyestuff and petrochemical works.     

风能资源评估系统开发与应用

开发风能资源、利用风力发电在我国虽然只有数十年，但其发展却很快，风能作为可再生的清洁能源也越来越受到重视。风能资源评估作为风电资源开发的前提，是风力机选址的关键。介绍了以Visual Basic为开发工具，利用SQL Server为数据库开发而成的风能资源评估系统的结构和特点。经实践证明，本系统缩短了风能资源评价周期，提高了数据处理可靠性。     

乙酸型顶极群落的内平衡与反馈调节机制研究

通过产酸脱硫反应器处理高浓度硫酸盐有机废水的连续流试验，从“动态”角度考察COD／SO4^2-比改变引起的pH值、氧化还原电位（ORP）、碱度（ALK）和末端产物（VFAs）等的变动及生态因子的叠加效应引发的优势种群变迁，分析了乙酸型顶极群落的稳定性及其发生定向性生态演替的规律，进而阐明了乙酸型顶极群落抵抗环境压力的内平衡与反馈调节机制，并指出乙酸型代谢和乙酸型顶极群落是产酸脱硫生态系统的典型特征。     

尖点突变模型在研究洪水引起环境突变中的应用

以1998年霍林河特大洪水为例，在进行洪水对环境影响作用分析的基础上，将洪水发生的危险系数、地面高程、地形坡度、降雨影响程度、土地盐碱率和草地开垦率6个控制变量划分为两个主分量。由于洪水引起的环境突变可以归纳为一种耦合突变，我们采用尖点突变模型进行求解，得出各主分量的数学表达式和水环境突变区域边界，绘制了该流域环境突变分区图，论证了应用尖点突变模型研究环境突变的合理性。     

腾冲县北海湿地自然保护区生态旅游开发初探

充分利用自然保护区的旅游资源优势发展旅游业，但不合理的开发会使生态环境遭到破坏、生物多样性逐渐丧失、湿地水质面临污染等等。在分析腾冲北海湿地自然保护区发展生态旅游的基础上对旅游开发中存在的问题提出对策和建议。     

CFB锅炉燃烧高硫石油焦的灰渣综合利用研究

循环流化床锅炉在燃烧含硫石油焦时,通过加入石灰石在燃烧的过程中以固态的形式脱硫,燃烧后将产生大量的灰渣,过去处理灰渣最通常的方式是作土地填埋。从灰渣的化学、物理特性试验研究出发,寻找循环流化床灰渣在建筑材料、农业应用和水泥添加剂方面的利用途径,研究了更加经济有效的灰渣处理方法。     

昆明城市太阳辐射资源及利用现状初探

利用有关资料,对昆明城市太阳辐射资源和利用现状进行了初步探讨。分析得知,昆明地区太阳辐射具有独特的分布特征,为太阳能的利用提供了良好的环境条件;太阳能热水器在干季晴好天气时增温效果显著。通过对不同太阳能热水器普及率和不同增温率的太阳能热水器等的计算,可以看出昆明城市太阳能热水器的节能效应是十分显著的,但仍有较大空间。加大昆明城市太阳能热水器的普及工作对于城市太阳能利用将是十分重要的。     

铝型材挤压模具的失效分析

根据铝型材挤压模具的服役条件,采用宏观与微观相结合的分析方法,分析现场挤压模具的失效形式、失效性质和失效原因,并提出了提高模具使用寿命的一些措施.