Glacier Variability (1967‐2006) in the Teton Range,Wyoming, United States1

Edmunds, Jake, Glenn Tootle, Greg Kerr, Ramesh Sivanpillai, and Larry Pochop, 2011. Glacier Variability (1967‐2006) in the Teton Range, Wyoming, United States. Journal of the American Water Resources Association (JAWRA) 48(1): 187‐196. DOI: 10.1111/j.1752‐1688.2011.00607.x Abstract: Glacier area and volume changes were quantified through the use of historical aerial photographs in Wyoming’s Teton Range. Glacier area changes in the Teton Range were estimated for three glaciers using unrectified aerial photography from 1967 to 2006. The total surface area of the three glaciers was 0.53 km² in 1967 and 0.40 km² in 2006, a decrease of 25% during the 39‐year period. The smallest glacier, Teepe, experienced the greatest area loss (60 ± 3%), whereas the largest glacier, Teton Glacier, lost 17 ± 3% of the 1967 area. For the current research, aerial photography from 1967 to 2002 was used to estimate glacier volume loss using stereoscopy techniques. The aerial photographs provide a finer resolution when compared with other datasets including satellite imagery (e.g., Landsat). Volume loss for the three glaciers was estimated to be 3.20 ± 0.46 million cubic meters over the period of 1967 to 2002. In assessing the primary climatic driver of the glacier ice loss, observed summer (June, July, and August) temperature data showed a statistically significant increase in temperatures when comparing the period of study (1968 to 2006) with historical temperatures from 1911 to 1967. When comparing spring (April 1st Snow Water Equivalent) snowpack for the period of study with historical records beginning in 1931, a significant difference in snowpack was not observed.     

Raman spectroscopic documentation of Oligocene bladder stone

Discovery of a fossil (30–35 million-year-old) urolith from Early Oligocene deposits in northeastern Colorado provides the earliest evidence for the antiquity of bladder stones. These are spherical objects with a layered phosphatic structure and a hollow center. Each layer is composed of parallel crystals oriented perpendicular to the surface. Macroscopic and microscopic examination and X-ray diffraction analysis, along with comparison with 1,000 contemporary uroliths, were used as evidence in the confirmation of this diagnosis. Raman microspectroscopy verified the presence of organic material between layers, confirming its biologic origin.     

Size-selective sampling of particulates using a physiologic sampling pump

Recent laboratory research indicates physiologic sampling of gas and vapor may provide more representative estimates of personal exposures than traditional methods. Modifications to the physiologic sampling pump (PSP) used in that research are described which extend its usefulness to size-selective sampling of particulates. PSPs used in previous research varied motor speed to keep sampling proportional to the subject's inhalation. This caused airflow and particle velocities through the collection device to continually change making those pumps unsuitable for sampling particulates. The modified implementation of the PSP pulls a constant airflow into and through a cyclone, then uses valves to either direct the airflow through, or divert the airflow around, the sampling filter. By using physiologic inputs to regulate the fraction of each second that air flows through the sampling filter, samples may be collected in proportion to inhalation rate. To evaluate the performance of a functional prototype 5 different sizes of monodisperse aerosols of ammonium fluorescein were generated by a vibrating orifice aerosol generator and introduced into a calm air chamber. To simulate different inhalation rates the valves of the PSP were energized using 9 different duty cycles. Efficiency curves are presented and compared to a standard respirable convention by bias mapping. The performance of the modified cyclone used in the PSP sampling head compared favorably with a commercially available cyclone of the same model, operating at a constant airflow (± 10% over almost all the size distributions of concern). The new method makes physiologic sampling of the respirable fraction of particulates feasible.     

Effect of sample conditioning and chamber loading on rate of formaldehyde release from wood products in a desiccator test

Several variables may influence the observed rate of formaldehyde (CH₂O) offgassing from wood products in a small static test chamber. We studied the effect of sample conditioning at ≈100% relative humidity and chamber loading (sample size) on CH₂O release rate from particle board (PB) and plywood (PW). Samples of PB and PW were placed in glass desiccators with reservoirs of water at a loading of 21 m²/m³ (sample surface area per chamber volume). The rate of CH₂O offgassing from the PB did not change over several weeks under these conditions (0.24 μg/cm²/day), but the overall release rate from the PW decreased after 8 days. In another experiment, the loading of the desiccator had a major effect on the rate of CH₂O offgassing from PB over a loading range of 1 to 42 m²/m³. The same phenomenon was observed with different loadings of PW. The inverse of the observed release rate varied linearly with the chamber loading of PB or PW. At a loading which may be encountered in a house (0.25 m²/m³), the release rate coefficient for PB calculated from the above inverse relation was 22-fold higher than that measured at a more conventional test load of 21 m²/m³. These results indicate that great care should be exercised when using desiccator tests for assessing and comparing the potential strength of materials as sources of CH₂O in the indoor environment.     

What is an explosion? A case history of an investigation for the insurance industry

After a large property loss, the insured and insurers of a hydroelectric power plant in North America became embroiled in subrogation to determine if the event could be characterized as an explosion. The subject insurance policy provided coverage for explosions, but excluded mechanical breakdowns. Analysis by Exponent Failure Analysis Associates indicated that a consistent, cross-disciplinary definition for explosions can be extracted from published scientific literature, and that this incident was not an explosion because certain key requirements were missing during the accident. However, this investigation has highlighted the necessity for insurance companies and their insureds to better understand this term and thereby minimize future coverage disputes. This paper presents an analysis of this incident and describes the necessary characteristics of an explosion.     

Stack sampling for organic emissions

Along with increased activity in source sampling for organics, there have been many improvements in the methods of acquiring samples. Much has been learned about how best to proceed, and a number of potentially serious pitfalls have been discovered, characterized, and circumvented. Unfortunately, communication of all of this new technology has not always been effective.

This paper reviews some of the more important fundamental principles involved in stack sampling for organics, briefly describes and discusses recently developed equipment, and points out a few of the more serious pitfalls to be avoided. Extensive references are provided, many of which are often overlooked by newcomers to the field. The conclusion is reached that it is possible to consistently obtain high‐quality samples of organic materials from stationary source stacks, even though knowledge and caution are necessary.     

Current Normative Concepts in Conservation

A plethora of normative conservation concepts have recently emerged, most of which are ill-defined: biological diversity, biological integrity, ecological restoration, ecological services, ecological rehabilitation, ecological sustainability, sustainable development, ecosystem health, ecosystem management, adaptive management, and keystone species are salient among them. These normative concepts can be organized and interpreted by reference to two new schools of conservation philosophy, compositionalism and functionalism. The former comprehends nature primarily by means of evolutionary ecology and considers Homo sapiens separate from nature. The latter comprehends nature primarily by means of ecosystem ecology and considers Homo sapiens a part of nature. Biological diversity, biological integrity, and ecological restoration belong primarily in the compositionalist glossary; the rest belong primarily in the functionalist glossary. The former set are more appropriate norms for reserves, the latter for areas that are humanly inhabited and exploited. In contrast to the older schools of conservation philosophy, preservationism and resourcism, compositionalism and functionalism are complementary, not competitive and mutually exclusive. As the historically divergent ecological sciences—evolutionary ecology and ecosystem ecology—are increasingly synthesized, a more unified philosophy of conservation can be envisioned.     

Cytochrome c adducts with PCB quinoid metabolites

Polychlorinated biphenyls (PCBs) are a group of 209 individual congeners widely used as industrial chemicals. PCBs are found as by-products in dye and paint manufacture and are legacy, ubiquitous, and persistent as human and environmental contaminants. PCBs with fewer chlorine atoms may be metabolized to hydroxy- and dihydroxy-metabolites and further oxidized to quinoid metabolites both in vitro and in vivo. Specifically, quinoid metabolites may form adducts on nucleophilic sites within cells. We hypothesized that the PCB-quinones covalently bind to cytochrome c and, thereby, cause defects in the function of cytochrome c. In this study, synthetic PCB quinones, 2-(4′-chlorophenyl)-1,4-benzoquinone (PCB3-pQ), 4-4'-chlorophenyl)-1,2-benzoquinone (PCB3-oQ), 2-(3′, 5′-dichlorophenyl)-1,4-benzoquinone, 2-(3′,4′, 5′-trichlorophenyl)-1,4-benzoquinone, and 2-(4′-chlorophenyl)-3,6-dichloro-1,4-benzoquinone, were incubated with cytochrome c, and adducts were detected by liquid chromatography-mass spectrometry (LC-MS) and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI TOF). Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) was employed to separate the adducted proteins, while trypsin digestion and liquid chromatography-tandem mass spectrometry (LC-MS/MS) were applied to identify the amino acid binding sites on cytochrome c. Conformation change of cytochrome c after binding with PCB3-pQ was investigated by SYBYL-X simulation and cytochrome c function was examined. We found that more than one molecule of PCB-quinone may bind to one molecule of cytochrome c. Lysine and glutamic acid were identified as the predominant binding sites. Software simulation showed conformation changes of adducted cytochrome c. Additionally, cross-linking of cytochrome c was observed on the SDS-PAGE gel. Cytochrome c was found to lose its function as electron acceptor after incubation with PCB quinones. These data provide evidence that the covalent binding of PCB quinone metabolites to cytochrome c may be included among the toxic effects of PCBs.