Cytochrome c adducts with PCB quinoid metabolites

Polychlorinated biphenyls (PCBs) are a group of 209 individual congeners widely used as industrial chemicals. PCBs are found as by-products in dye and paint manufacture and are legacy, ubiquitous, and persistent as human and environmental contaminants. PCBs with fewer chlorine atoms may be metabolized to hydroxy- and dihydroxy-metabolites and further oxidized to quinoid metabolites both in vitro and in vivo. Specifically, quinoid metabolites may form adducts on nucleophilic sites within cells. We hypothesized that the PCB-quinones covalently bind to cytochrome c and, thereby, cause defects in the function of cytochrome c. In this study, synthetic PCB quinones, 2-(4′-chlorophenyl)-1,4-benzoquinone (PCB3-pQ), 4-4'-chlorophenyl)-1,2-benzoquinone (PCB3-oQ), 2-(3′, 5′-dichlorophenyl)-1,4-benzoquinone, 2-(3′,4′, 5′-trichlorophenyl)-1,4-benzoquinone, and 2-(4′-chlorophenyl)-3,6-dichloro-1,4-benzoquinone, were incubated with cytochrome c, and adducts were detected by liquid chromatography-mass spectrometry (LC-MS) and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI TOF). Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) was employed to separate the adducted proteins, while trypsin digestion and liquid chromatography-tandem mass spectrometry (LC-MS/MS) were applied to identify the amino acid binding sites on cytochrome c. Conformation change of cytochrome c after binding with PCB3-pQ was investigated by SYBYL-X simulation and cytochrome c function was examined. We found that more than one molecule of PCB-quinone may bind to one molecule of cytochrome c. Lysine and glutamic acid were identified as the predominant binding sites. Software simulation showed conformation changes of adducted cytochrome c. Additionally, cross-linking of cytochrome c was observed on the SDS-PAGE gel. Cytochrome c was found to lose its function as electron acceptor after incubation with PCB quinones. These data provide evidence that the covalent binding of PCB quinone metabolites to cytochrome c may be included among the toxic effects of PCBs.     

Present and potential future contributions of sulfate,black and organic carbon aerosols from China to global air quality,premature mortality and radiative forcing

Aerosols are harmful to human health and have both direct and indirect effects on climate. China is a major contributor to global emissions of sulfur dioxide (SO₂), a sulfate (SO₄^2?) precursor, organic carbon (OC), and black carbon (BC) aerosols. Although increasingly examined, the effect of present and potential future levels of these emissions on global premature mortality and climate change has not been well quantified. Through both direct radiative effects and indirect effects on clouds, SO₄^2? and OC exert negative radiative forcing (cooling) while BC exerts positive forcing (warming). We analyze the effect of China's emissions of SO₂, SO₄^2?, OC and BC in 2000 and for three emission scenarios in 2030 on global surface aerosol concentrations, premature mortality, and radiative forcing (RF). Using global models of chemical transport (MOZART-2) and radiative transfer (GFDL RTM), and combining simulation results with gridded population data, mortality rates, and concentration–response relationships from the epidemiological literature, we estimate the contribution of Chinese aerosols to global annual premature mortality and to RF in 2000 and 2030. In 2000, we estimate these aerosols cause approximately 470 000 premature deaths in China and an additional 30 000 deaths globally. In 2030, aggressive emission controls lead to a 50% reduction in premature deaths from the 2000 level to 240 000 in China and 10 000 elsewhere, while under a high emissions scenario premature deaths increase 50% from the 2000 level to 720 000 in China and to 40 000 elsewhere. Because the negative RF from SO₄^2? and OC is larger than the positive forcing from BC, Chinese aerosols lead to global net direct RF of ?74 mW m^?2 in 2000 and between ?15 and ?97 mW m^?2 in 2030 depending on the emissions scenario. Our analysis indicates that increased effort to reduce greenhouse gases is essential to address climate change as China's anticipated reduction of aerosols will result in the loss of net negative radiative forcing.     

A GIS model-based screening of potential contamination of soil and water by pyrethroids in Europe

The paper presents a geographic information system (GIS) model-based approach for analysis of potential contamination of soil and water by pyrethroids for the European continent. Pyrethroids are widely used pesticides and their chemical and toxicological characteristics suggest there may be concerns about human health and ecosystems, although so far there is no strong evidence indicating actual risk. However, little monitoring has been conducted and limited experimental information is available. We perform an assessment exercise that demonstrates how accessible information and GIS-based modeling allow to estimate the spatial distribution of chemical concentrations and fluxes at a screening level. The assessment highlights potential hot spots and the main environmental transport pathways, in a quick and simple way. By combining information on pesticide use, crop distribution and landscape and climate parameters we identify potential problem areas to help focusing monitoring campaigns. The approach presented here is simple and fast, and can be applied to virtually all pesticide classes used over a large domain, and is therefore suitable for the screening of large quantities of chemicals, of which the majority has not undergone any systematic environmental monitoring program. The method has been tested through benchmarking with other well-established models. However, further research is needed to evaluate it against experimental observations.     

Glacier Variability (1967‐2006) in the Teton Range,Wyoming, United States1

Edmunds, Jake, Glenn Tootle, Greg Kerr, Ramesh Sivanpillai, and Larry Pochop, 2011. Glacier Variability (1967‐2006) in the Teton Range, Wyoming, United States. Journal of the American Water Resources Association (JAWRA) 48(1): 187‐196. DOI: 10.1111/j.1752‐1688.2011.00607.x Abstract: Glacier area and volume changes were quantified through the use of historical aerial photographs in Wyoming’s Teton Range. Glacier area changes in the Teton Range were estimated for three glaciers using unrectified aerial photography from 1967 to 2006. The total surface area of the three glaciers was 0.53 km² in 1967 and 0.40 km² in 2006, a decrease of 25% during the 39‐year period. The smallest glacier, Teepe, experienced the greatest area loss (60 ± 3%), whereas the largest glacier, Teton Glacier, lost 17 ± 3% of the 1967 area. For the current research, aerial photography from 1967 to 2002 was used to estimate glacier volume loss using stereoscopy techniques. The aerial photographs provide a finer resolution when compared with other datasets including satellite imagery (e.g., Landsat). Volume loss for the three glaciers was estimated to be 3.20 ± 0.46 million cubic meters over the period of 1967 to 2002. In assessing the primary climatic driver of the glacier ice loss, observed summer (June, July, and August) temperature data showed a statistically significant increase in temperatures when comparing the period of study (1968 to 2006) with historical temperatures from 1911 to 1967. When comparing spring (April 1st Snow Water Equivalent) snowpack for the period of study with historical records beginning in 1931, a significant difference in snowpack was not observed.     

STATE VARIABLE MODEL FOR URBAN RAINFALL-RUNOFF PROCESS1

ABSTRACT: A nonlinear hydrologic system model has been developed for analyzing the urban rainfall-runoff process. The model is formulated as a state variable model consisting of several parameters. A search technique is employed to find the set of parameters for which the model's response best fits observed data. The model could be used in either a simulation or forecasting mode. The model is applied to observed data for the Waller Creek Watershed in Austin, Texas, to develop the model parameters for various levels of urbanization of the watershed. The trend of each parameter with respect to levels of urbanization is examined.     

DECISION FRAMEWORK FOR SEDIMENT CONTROL IN MUDDY CREEK WATERSHED1

ABSTRACT: The tailwater of Bridgewater Dam, below Lake James, North Carolina, is a designated trout stream. It has environmental attributes for a good cold water fishery with the exception of high suspended sediments. Muddy Creek, a tributary about 1.5 km downstream of the dam, is a major source of sediments. The Muddy Creek Watershed Restoration Initiative was established to develop and implement a sediment control plan. The Watershed Analysis Risk Management Framework was applied to simulate soil erosion and sedimentation and to help determine appropriate action. The simulated sediment concentrations of the river were comparable to observed data from November 1994 to November 2001. For the base condition, the sediment load was 135,000 kg/d from surface erosion and 1,300,000 kg/d from bank erosion. Increasing the buffer strip from existing 50 to 80 percent to 100 percent of stream segments would only reduce surface erosion to 70,400 kg/d with little change in sediment concentrations. Eliminating riverbank erosion would reduce the sediment load from 920,000 to 87,700 kg/d. The bank stabilization project would not only lower suspended sediment concentrations for Muddy Creek, but also reduce the lake sediment accumulation in the downstream Lake Rhodhiss by approximately 13 percent.     

Relationships between phosphorus levels in soil and in runoff from corn production systems

Phosphorus-enriched runoff from cropland can hasten eutrophication of surface waters. A soil P level exceeding crop needs due to long-term fertilizer and/or manure applications is one of several potential sources of increased P losses in runoff from agricultural systems. Field experiments were conducted at locations representative of three major soil regions in Wisconsin in corn (Zea mays L.) production systems to determine the effect of tillage, recent manure additions, soil P extraction method, and soil sampling depth (0-2, 0-5, and 0-15 cm) on the relationship between soil test P level and P concentrations in runoff. Runoff from simulated rainfall (75 mm h(-1)) was collected from 0.83-m2 areas for 1 h after rainfall initiation and analyzed for dissolved phosphorus (DP), total phosphorus (TP), and sediment. The DP fraction of the TP concentration in runoff ranged from 5 to 17% among sites with most of the variation in TP due to varying sediment concentration on the well-drained silt loam soils and to soil test P level on the poorly drained silty clay loam soil. In 213 observations across a range of soils and managements, good relationships occurred between soil test P level and DP concentration in runoff for most of the tests and sampling depths used. Recent manure additions and high levels of surface cover from corn residue sometimes masked this relationship. The slope of DP relative to soil test P level was markedly higher on the silty clay loam soil than on the silt loam soils possibly due to soil permeability-infiltration rate differences. Agronomic soil P tests were as effective as environmentally oriented soil P tests for predicting DP concentrations in runoff.