Megacities and Large Urban Agglomerations in the Coastal Zone: Interactions Between Atmosphere, Land, and Marine Ecosystems

Megacities are not only important drivers for socio-economic development but also sources of environmental challenges. Many megacities and large urban agglomerations are located in the coastal zone where land, atmosphere, and ocean meet, posing multiple environmental challenges which we consider here. The atmospheric flow around megacities is complicated by urban heat island effects and topographic flows and sea breezes and influences air pollution and human health. The outflow of polluted air over the ocean perturbs biogeochemical processes. Contaminant inputs can damage downstream coastal zone ecosystem function and resources including fisheries, induce harmful algal blooms and feedback to the atmosphere via marine emissions. The scale of influence of megacities in the coastal zone is hundreds to thousands of kilometers in the atmosphere and tens to hundreds of kilometers in the ocean. We list research needs to further our understanding of coastal megacities with the ultimate aim to improve their environmental management.     

Aquatic and terrestrial ecotoxicology considering the soil:water continuum in the Anthropocene context

Environmental Science and Pollution Research -     

Factors inducing bryophyte growth on prehistoric pigments and effect of UV-C treatment

Environmental Science and Pollution Research - In La Glacière cave (France), the touristic activity has been conducted to an environmental parameter change that has led to photosynthetic...     

Accelerated transport of (90)Sr following a release of high ionic strength solution in vadose zone sediments

Numerical simulation of cation exchange and mineral precipitation/dissolution reactions using the multiphase reactive geochemical transport code TOUGHREACT has provided important insight into the distribution of (90)Sr among layers of geologic strata in a complex vadose zone at the U. S. Department of Energy's Idaho National Laboratory. During a transfer operation in November 1972, 70.4 m(3) of acidic, high ionic strength liquid containing 15,900 Ci of (90)Sr was released over five days into alluvial gravels 137 m above the Snake River Plain Aquifer. Sampling data from perched water zones 33 m below the release contain very high levels of (90)Sr as do soil samples obtained nearer the point of release. Use of traditional simulation approaches using laboratory-measured constant partitioning coefficients (K(d)) cannot simultaneously explain perched water and soil concentrations. To address the discrepancy, a reactive transport approach was adopted to include competitive cation exchange, dissolution/precipitation of calcite, carbon dioxide gas production and transport, and gibbsite precipitation. Simulation results using this model suggest that some of the (90)Sr could have been transported very rapidly immediately after the release with the acceleration facilitated by competition for cation exchange sites with high sodium concentrations in the released liquid and calcium dissolved from calcite, and to a lesser extent by formation of aqueous complexes with nitrate. Once the leading edge of the liquid assemblage was flushed from the alluvium, the mobility of the remaining (90)Sr decreased significantly in the absence of the competing cations. Calculations indicate that there should be a net increase in calcite, suggesting that (90)Sr could be entrained in the mineral lattice, but insufficient field data exist for confirmation. Sensitivity studies show that the cation exchange selectivity coefficients were the most sensitive individual parameters determining the (90)Sr distribution. However, the most sensitive overall quantity was the total ion exchange capacity which is a function of the moles of exchange sites per volume of pore water, the cation exchange capacity, and the total volume wetted by the infiltrating solution. In contrast, the future mobility of (90)Sr was found to be relatively insensitive to the normal range in the composition of influxing precipitation and anthropogenic waters.     

Alkanes and hopanes for pollution source apportionment in coking plant soils

Polluted soils of former coking plants are characterized by multiple organic contributions, e.g. coal tar, coal, coke, soot, and natural organic matter, that can either be sources of polycyclic aromatic hydrocarbons (PAHs) or act as sorption surfaces for pollutants. The contamination level is usually based on the quantification of 16 PAHs but it does not provide any information on PAH sources. We studied the aliphatic fractions of 25 soil samples from a former coking plant site by microscopy and gas chromatography-mass spectrometry (GC-MS). The microscopic investigation allowed to identify four main organic contributions: coal tar, coal, coke, and natural organic matter. These isolated sources were analyzed and considered as reference materials. Although the PAH distributions were very similar in the 25 contaminated soils, alkanes and hopanes distributions were representative from various contributions characterizing the relative enrichment in coal, coal tars, or natural organic matter. Two principal component analyses based on n-alkanes and hopanes showed that three molecular indices, the carbon preference index, the low molecular weight/high molecular weight n-alkanes ratio, and the 18α(H)-22,29,30-trisnorhopane/(18α(H)-22,29,30-trisnorhopane+17α(H)-22,29,30-trisnorhopane) ratio allow to classify polluted soils according to various organic contributions.     

Ecological consequences of carbon substrate identity and diversity in a laboratory study

Plants return a wide range of carbon (C) substrates to the soil system. The decomposition rate of these substrates is determined by their chemical nature, yet few studies have examined the relative ecological role of specific substrates (i.e., substrate identity) or mixtures of substrates. Carbon substrate identity and diversity may alter soil chemistry and soil community composition, resulting in changes in belowground ecosystem functions such as decomposition and nutrient transfer, creating feedbacks that may affect plant growth and the aboveground community. A laboratory experiment was set up in which eight C substrates of varying chemical complexity were added to a base soil singly, in pairs, fours, or with all eight together every four days over a 92-day period. After 92 days these soils were analyzed for changes in chemistry, microbial community structure, and components of ecosystem functioning. The identity of the added C substrates significantly affected soil chemistry, microbial basal and substrate-induced respiration, and soil microbial community structure measured by either the catabolic response profile (CRP) technique or phospholipid fatty acid composition. These belowground changes strongly affected the ability of the soil microflora to decompose cellulose paper, probably because of differential effects of the C substrates on soil energy supplies and enzyme activities. The addition of C substrates to soils also reduced plant growth compared to the unamended control soil, but less so in soils amended with a tannin than those amended with other substrates. Carbon substrate diversity effects saturated at low diversity levels, tended to have neutral or negative effects on ecosystem functions, and depended strongly on which C substrates were added. It increased CRP compound use but had little effect on other measures of the soil microbial community. Overall, results showed that the chemical nature of C substrates added to soil, and sometimes their diversity, can affect the soil microbial community and soil chemistry, which subsequently affect other ecosystem processes such as decomposition and plant growth. The identity and diversity of substrates that plants add to soil may therefore have important consequences for both above- and belowground ecosystem functions.     

Sources of hydrocarbons in sediments of the Bay of Fort de France (Martinique)

Sedimentary hydrocarbons have been studied quantitatively and qualitatively in 16 stations of the Bay of Fort de France (Martinique). Hydrocarbon levels ranged from 54 to 1045 mg kg(-1) sed. dry weight. Origin of hydrocarbons are multiple: biogenic (terrestrial inputs), pyrolytic (residues of natural or anthropogenic combustions), diagenetic and anthropogenic (petroleum contamination). Generally high levels of hydrocarbons are not associated to a petroleum contamination. The main source of hydrocarbons in the mangrove coastal zones of the Bay of Fort de France seems to be the early diagenetic degradation products of 3-oxytriterpenoids. Excepted two stations, petroleum contamination is very low or absent.     

Distribution of organochlorine pesticides (OCs) and polychlorinated biphenyls (PCBs) in marine sediments directly exposed to wastewater from Cortiou, Marseille

Introduction

The future ??Calanque National Park?? coastlines of the Bouches-du-Rh?ne and Var departments in France, constitute one of the ten biodiversity hot spots identified in the Mediterranean basin that receives industrial and urban wastewaters discharged from Marseille and its suburbs.

Materials and methods

Organochlorine pesticides (OCs) and polychlorinated biphenyls (PCBs) were measured in sediments collected from 12 sampling sites (C1?CC12) of sewage discharge to the sea from the wastewater treatment plant of Cortiou-Marseille. This study aims to determine the extent of these compounds in the sediments and to establish the possible sources of these contaminants.

Results and discussion

Total pesticides in the sediments ranged from 1.2 to 190.6 ng g^-1 dry weight of sediment. The highest value was found at station C1, with a decreasing trend in total OC concentrations seaward. Among these compounds, the concentrations of the sum of dichlorodiphenyltrichloroethane (??DDT) were the highest, ranging from 0.7 to 114.3 ng g^-1. PCB concentrations, expressed as equivalent to Arochlor 1260, varied from 9.1 to 226.9 ng g^-1. Individually, the dominant coplanar PCB congeners CB-153, CB-138 and CB-101. Generally, PCB concentrations at stations C2, C3, C5 and C7 were higher than those at stations C10, C11 and C12. Through some pollution indices, we showed the long-term contamination input of these OCs (DDT, endosulfan, HCH and heptachlor cases) rather than a recent release resulting from degradation and long-term weathering (dieldrin, aldrin and methoxychlor cases). Occurrence of PCBs might be due to their resistance to degradation processes or/and chronic inputs.

Conclusions

By comparison with available sediment quality guideline (SQG) values, the environmental significance and toxicological implications of PCBs and OCs (i) reveal the probable adverse effects for the sediments from C1, C5, C6, C9 and (ii) confirm the adverse effect for marine biota and more particularly for benthic communities at C2?CC4, C7 and C8.     

Introducing design for the environment at boeing defense and space group through the application of abridged life-cycle analysis

The streamlined, matrix approach to environmental Life-Cycle Analysis (LCA) developed originally at AT&T by Graedel and Allenby can be adapted to manufacturing processes to produce a useful tool for Design for the Environment (DFE). Pollution prevention in manufacturing has typically focused on the environmental impact of processes at a manufacturer's site. However, it is important to recognize that a process has a “life cycle,” albeit not precisely like the life cycle associated with a product. Modification of processes can also have upstream and downstream effects. In this article, the authors show how, by using a streamlined LCA matrix, it is possible to evaluate the environmental impact associated with a process over the process's life cycle. This approach also allows managers to allocate resources to improve processes that have greater environmental impact and to assess process improvements.     

Improving the health and safety of 911 emergency call centre agents: an evaluability assessment of a knowledge transfer strategy

A knowledge transfer (KT) strategy was implemented by the IRSST, an occupational health and safety research institute established in Québec (Canada), to improve the prevention of psychological and musculoskeletal problems among 911 emergency call centre agents. An evaluability assessment was conducted in which each aspect of the KT approach was documented systematically to determine whether the strategy had the potential to be evaluated in terms of its impact on the targeted population. A review of the literature on KT in occupational health and safety and on the evaluation of such KT programmes, along with the development of a logic model based on documentary analysis and semi-structured interviews with key stakeholders, indicated that the KT strategy was likely to have had a positive impact in the 911 emergency call centre sector. Implications for future research are discussed.