Application of eggshell waste for the immobilization of cadmium and lead in a contaminated soil

Liming materials have been used to immobilize heavy metals in contaminated soils. However, no studies have evaluated the use of eggshell waste as a source of calcium carbonate (CaCO₃) to immobilize both cadmium (Cd) and lead (Pb) in soils. This study was conducted to evaluate the effectiveness of eggshell waste on the immobilization of Cd and Pb and to determine the metal availability following various single extraction techniques. Incubation experiments were conducted by mixing 0–5% powdered eggshell waste and curing the soil (1,246 mg Pb kg^?1 soil and 17 mg Cd kg^?1 soil) for 30 days. Five extractants, 0.01 M calcium chloride (CaCl₂), 1 M CaCl₂, 0.1 M hydrochloric acid (HCl), 0.43 M acetic acid (CH₃COOH), and 0.05 M ethylendiaminetetraacetic acid (EDTA), were used to determine the extractability of Cd and Pb following treatments with CaCO₃ and eggshell waste. Generally, the extractability of Cd and Pb in the soils decreased in response to treatments with CaCO₃ and eggshell waste, regardless of extractant. Using CaCl₂ extraction, the lowest Cd concentration was achieved upon both CaCO₃ and eggshell waste treatments, while the lowest Pb concentration was observed using HCl extraction. The highest amount of immobilized Cd and Pb was extracted by CH₃COOH or EDTA in soils treated with CaCO₃ and eggshell waste, indicating that remobilization of Cd and Pb may occur under acidic conditions. Based on the findings obtained, eggshell waste can be used as an alternative to CaCO₃ for the immobilization of heavy metals in soils.     

Size-selective sampling of particulates using a physiologic sampling pump

Recent laboratory research indicates physiologic sampling of gas and vapor may provide more representative estimates of personal exposures than traditional methods. Modifications to the physiologic sampling pump (PSP) used in that research are described which extend its usefulness to size-selective sampling of particulates. PSPs used in previous research varied motor speed to keep sampling proportional to the subject's inhalation. This caused airflow and particle velocities through the collection device to continually change making those pumps unsuitable for sampling particulates. The modified implementation of the PSP pulls a constant airflow into and through a cyclone, then uses valves to either direct the airflow through, or divert the airflow around, the sampling filter. By using physiologic inputs to regulate the fraction of each second that air flows through the sampling filter, samples may be collected in proportion to inhalation rate. To evaluate the performance of a functional prototype 5 different sizes of monodisperse aerosols of ammonium fluorescein were generated by a vibrating orifice aerosol generator and introduced into a calm air chamber. To simulate different inhalation rates the valves of the PSP were energized using 9 different duty cycles. Efficiency curves are presented and compared to a standard respirable convention by bias mapping. The performance of the modified cyclone used in the PSP sampling head compared favorably with a commercially available cyclone of the same model, operating at a constant airflow (± 10% over almost all the size distributions of concern). The new method makes physiologic sampling of the respirable fraction of particulates feasible.     

Modelling the Transport of Oil–Mineral-Aggregates (OMAs) in the Marine Environment and Assessment of Their Potential Risks

Spilled oil can interact with suspended particles in marine environments and form oil–mineral aggregates (OMAs). Some OMAs with densities higher than seawater density can settle to the seedbed to pose potential risks to benthic organisms. To understand the transport and fate of oil associated with OMAs and evaluate their potential risks, an integrated hydrodynamic and fate/transport model has been used in a hypothetical case study of 1,000 tonnes of South Louisiana oil spilled in the Bristol Channel. Several scenarios have been simulated under different wave and current conditions. By using OMA properties derived from laboratory measurements reported in literature, it has been found that the risk to the benthos is unlikely for the two hypothetical cases with strong currents, but it is likely for the wave only (weak current) case. The effects of other factors such as OMA properties and sediment concentration were also examined in terms of their effects on the transport process and risks.     

Estimation of the contributions of long range transported aerosol in East Asia to carbonaceous aerosol and PM concentrations in Seoul, Korea using highly time resolved measurements: a PSCF model approach

The contributions of long range transported aerosol in East Asia to carbonaceous aerosol and particulate matter (PM) concentrations in Seoul, Korea were estimated with potential source contribution function (PSCF) calculations. Carbonaceous aerosol (organic carbon (OC) and elemental carbon (EC)), PM(2.5), and PM(10) concentrations were measured from April 2007 to March 2008 in Seoul, Korea. The PSCF and concentration weighted trajectory (CWT) receptor models were used to identify the spatial source distributions of OC, EC, PM(2.5), and coarse particles. Heavily industrialized areas in Northeast China such as Harbin and Changchun and East China including the Pearl River Delta region, the Yangtze River Delta region, and the Beijing-Tianjin region were identified as high OC, EC and PM(2.5) source areas. The conditional PSCF analysis was introduced so as to distinguish the influence of aerosol transported from heavily polluted source areas on a receptor site from that transported from relatively clean areas. The source contributions estimated using the conditional PSCF analysis account for not only the aerosol concentrations of long range transported aerosols but also the number of transport days effective on the measurement site. Based on the proposed algorithm, the condition of airmass pathways was classified into two types: one condition where airmass passed over the source region (PS) and another condition where airmass did not pass over the source region (NPS). For most of the seasons during the measurement period, 249.5-366.2% higher OC, EC, PM(2.5), and coarse particle concentrations were observed at the measurement site under PS conditions than under NPS conditions. Seasonal variations in the concentrations of OC, EC, PM(2.5), and coarse particles under PS, NPS, and background aerosol conditions were quantified. The contributions of long range transported aerosols on the OC, EC, PM(2.5), and coarse particle concentrations during several Asian dust events were also estimated. We also investigated the performance of the PSCF results obtained from combining highly time resolved measurement data and backward trajectory calculations via comparison with those from data in low resolutions. Reduced tailing effects and the larger coverage over the area of interest were observed in the PSCF results obtained from using the highly time resolved data and trajectories.     

Environmental refuge from disease-driven amphibian extinction

Species that are tolerant of broad environmental gradients may be less vulnerable to epizootic outbreaks of disease. Chytridriomycosis, caused by the fungus Batrachochytrium dendrobatidis, has been linked to extirpations and extinctions of amphibian species in many regions. The pathogen thrives in cool, moist environments, and high amphibian mortality rates have commonly occurred during chytridiomycosis outbreaks in amphibian populations in high-elevation tropical rainforests. In Australia several high-elevation species, including the armored mist frog (Litoria lorica), which is designated as critically endangered by the International Union for the Conservation of Nature (IUCN), were believed to have gone extinct during chytridiomycosis outbreaks in the 1980s and early 1990s. Species with greater elevational ranges disappeared from higher elevations, but remained common in the lowlands. In June 2008, we surveyed a stream in a high-elevation dry sclerophyll forest and discovered a previously unknown population of L. lorica and a population of the waterfall frog (Litoria nannotis). We conducted 6 additional surveys in June 2008, September 2008, March 2009, and August 2009. Prevalences of B. dendrobatidis infection (number infected per total sampled) were consistently high in frogs (mean 82.5%, minimum 69%) of both species and in tadpoles (100%) during both winter (starting July) and summer (starting February). However, no individuals of either species showed clinical signs of disease, and they remained abundant (3.25 - 8.75 individuals of L. lorica and 6.5-12.5 individuals of L. nannotis found/person/100 m over 13 months). The high-elevation dry sclerophyll site had little canopy cover, low annual precipitation, and a more defined dry season than a nearby rainforest site, where L. nannotis was more negatively affected by chytridiomycosis. We hypothesize this lack of canopy cover allowed the rocks on which frogs perched to warm up, thereby slowing growth and reproduction of the pathogen on the hosts. In addition, we suggest surveys for apparently extinct or rare species should not be limited to core environments.     

Characteristics of environmental pollution related with public complaints in an industrial shipbuilding complex, Korea

The shipbuilding industry of Korea, ranked number one in the world in annual amount of ship orders, has contributed to national economic growth; however, this has resulted in various environmental problems. Characteristics of environmental pollution, such as particulate matters, odor, and noise, which are closely related with public complaints, were evaluated in an industrial shipbuilding complex. The concentrations of PM-10 and TSP were significantly affected by the distance between the measurement site and shipbuilding workplace, as well as the height of the measurement site. Average PM-10 concentrations in the residential area ranged from 40.10 to 44.10 ??g/m³, which were not high in comparison with the ambient air quality standard and those of major cities in Korea. Paint particles could affect a wider area than typical particulate matters due to their generation and transport properties. The properties of odor in the study area were widely affected by the work intensity in shipyards and the temperature. Twenty-five out of total 54 samples collected in the residential area exceeded the dilution factor of 10, which is the tolerable limit adopted in Korea. Noise had an influence on a limited area due to the extinction effect with distance from the shipyards, while severe noise levels higher than 90 dB(A) were frequently found inside the shipyards.     

Support of sustainable management of nitrogen contamination due to septic systems using numerical modeling methods

Nitrogen contamination is a serious concern to sustainable environmental management, and one important source of nitrogen contaminant is due to wastewater treatment using onsite sewage treatment and disposal systems (OSTDS, a.k.a., septic systems). This paper presents a study in which numerical modeling is used to support sustainable decision-making and management of nitrogen contamination by utilizing a recently developed GIS-based software, VZMOD, a Vadose Zone MODel for simulating nitrogen transformation and transport in vadose zone between drainfield of septic systems and water table. VZMOD is based on a physical model of unsaturated flow and nitrogen transformation and transport, and the model is solved numerically using the finite element methods. This is the major difference between VZMOD and other GIS-based software of nitrogen modeling. Using GIS techniques, VZMOD considers spatial variability of a number of hydrogeologic parameters such as hydraulic conductivity and porosity. A unique feature of VZMOD is that VZMOD addresses spatial variability of water table by using VZMOD together with ArcNLET, an ArcGIS-based software developed to simulate groundwater flow and nitrate load from septic systems to surface water bodies. VZMOD is designed to execute in different modes to be compatible with different levels of data availability in various management projects of nitrogen contamination. This paper presents an application of VZMOD at a neighborhood with hundreds of septic systems and heterogeneous hydraulic conductivity, porosity, and water table depth. The modeling results indicate that using septic systems at the considered neighborhood is unsustainable and more management means are necessary.     

Assessment of Residential Rain Barrel Water Quality and Use in Cincinnati,Ohio1

The collection, storage, and reuse of rainwater collected in rain barrels from urban rooftop areas assists municipalities in achieving stormwater management objectives and in some areas also serves as an adjunct resource for domestic water supplies. In this study, rainwater reuse and levels of select microbial indicators were monitored for six residential rain barrels located in the Shepherd Creek watershed of Cincinnati, Ohio. Water from rain barrels typically had poor microbial quality and was used for watering indoor and outdoor plants. Rain barrel water chemistry was slightly acidic, exhibited wide ranges in conductivity, turbidity, and total organic carbon (TOC) concentrations and gave no evidence of the presence of cyanobacterial microcystin toxins. Selected microbial water‐quality indicators indicated that counts of total coliform and enterococci were consistently above U.S. Environmental Protection Agency standards for secondary recreational contact water‐quality standards. Residential rain barrels can provide water appropriate for low‐contact reuses (such as plant watering), although there may be transient periods of high levels of indicator bacteria in the collected water.