Groundwater Quality Assessment of Tehsil Kheragarh, Agra (India) with Special Reference to Fluoride

Fluoride concentration and other parameters in groundwater from 261 villages in Tehsil Kheragarh of District Agra were assessed and attempts were made to observe the relationship between fluoride and other water quality parameters. Of 658 groundwater samples (collected from separate sources) analysed for fluoride, 27% were in the range of 0–1.0 mg/L, 25% in 1.0–1.5 mg/L, 32% in1.5–3.0 mg/L and 16% above 3.0 mg/L. The highest fluoride concentration recorded was 12.80 mg/L. Significant correlation of fluoride with pH, alkalinity, Na, SiO₂ and PO₄ were observed. Factor analysis was also attempted in order to identify the contributing sources.     

Evaluation of the European population intake fractions for European and Finnish anthropogenic primary fine particulate matter emissions

The intake fraction (iF) has been defined as the integrated incremental intake of a pollutant released from a source category or region summed over all exposed individuals. In this study we evaluated the iFs in the population of Europe for emissions of anthropogenic primary fine particulate matter (PM_2.5) from sources in Europe, with a more detailed analysis of the iF from Finnish sources. Parameters for calculating the iFs include the emission strengths, the predicted atmospheric concentrations, European population data, and the average breathing rate per person. Emissions for the whole of Europe and Finland were based on the inventories of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario (FRES) model, respectively. The atmospheric dispersion of primary PM_2.5 was computed using the regional-scale dispersion model SILAM. The iFs from Finnish sources were also computed separately for six emission source categories. The iFs corresponding to the primary PM_2.5 emissions from the European countries for the whole population of Europe were generally highest for the densely populated Western European countries, second highest for the Eastern and Southern European countries, and lowest for the Northern European and Baltic countries. For the entire European population, the iF values varied from the lowest value of 0.31 per million for emissions from Cyprus, to the highest value of 4.42 per million for emissions from Belgium. These results depend on the regional distribution of the population and the prevailing long-term meteorological conditions. Regarding Finnish primary PM_2.5 emissions, the iF was highest for traffic emissions (0.68 per million) and lowest for major power plant emissions (0.50 per million). The results provide new information that can be used to find the most cost-efficient emission abatement strategies and policies.     

Making a technological choice for disaster management and poverty alleviation in India

The right mix of policy, institutional arrangements and use of technology provides the framework for a country's approach to disaster mitigation. Worldwide, there has been a shift away from a strictly 'top-down' approach relying on government alone, to a combination of 'top-down' and 'bottom-up' approaches. The aim is to enhance the indigenous coping mechanisms of vulnerable communities; draw on their cooperative spirit and energy; and empower them through appropriate information and contextual knowledge to mitigate natural disasters. In light of this, the paper examines India's use of space technology in its disaster management efforts. Poverty alleviation and disaster management are almost inseparable in many parts of the country, as vulnerability to natural disasters is closely aligned with poverty. Addressing these issues together requires integrated knowledge systems. The paper examines how knowledge inputs from space technology have strengthened the national resolve to combat natural disasters in conjunction with alleviating rural poverty.     

Identifying and rating cultural sustainability indicators: a case study of wood-based bioenergy systems in eastern Finland

Cultural sustainability has become a much discussed topic in the forestry and bioenergy sectors. However, there are not many indicators available for measuring cultural sustainability. In order to identify indicators for the assessment of the cultural sustainability impacts of wood-based bioenergy in eastern Finland, two-phased expert interviews were conducted. The process was supported by a hybrid approach: A qualitative mapping technique was applied when the indicators were identified, and weights for the indicators were set using a quantitative rating technique. The experts identified 49 indicators of cultural sustainability. Most of the generated indicators were relevant for local uses and highlighted the perceptions of the general public. Furthermore, most of the indicators were relevant from the perspective of raw material acquisition. Applying methods of differing backgrounds enabled advanced problem structuring, which allowed the identification of indicators suitable for assessing cultural sustainability of wood-based bioenergy in Eastern Finland. The quantitative rating technique enabled the determination of the importance of the indicators generated. Nevertheless, it seems that the hybrid approaches have many challenges related to the quantitative measuring of the participants’ perceptions. Cultural sustainability indicators should be identified within a case study, since it seems that most of the cultural sustainability indicators are case specific. The process introduced here offers steps for identifying case-specific cultural sustainability indicators; however, the concept of cultural sustainability cannot be strictly defined.     

A Visual Basic simulation software tool for performance analysis of a membrane-based advanced water treatment plant

A Visual Basic simulation software (WATTPPA) has been developed to analyse the performance of an advanced wastewater treatment plant. This user-friendly and menu-driven software is based on the dynamic mathematical model for an industrial wastewater treatment scheme that integrates chemical, biological and membrane-based unit operations. The software-predicted results corroborate very well with the experimental findings as indicated in the overall correlation coefficient of the order of 0.99. The software permits pre-analysis and manipulation of input data, helps in optimization and exhibits performance of an integrated plant visually on a graphical platform. It allows quick performance analysis of the whole system as well as the individual units. The software first of its kind in its domain and in the well-known Microsoft Excel environment is likely to be very useful in successful design, optimization and operation of an advanced hybrid treatment plant for hazardous wastewater.     

Sources and characteristics of carbonaceous aerosols at Agra “World heritage site” and Delhi “capital city of India”

Agra, one of the oldest cities “World Heritage site”, and Delhi, the capital city of India are both located in the border of Indo-Gangetic Plains (IGP) and heavily loaded with atmospheric aerosols due to tourist place, anthropogenic activities, and its topography, respectively. Therefore, there is need for monitoring of atmospheric aerosols to perceive the scenario and effects of particles over northern part of India. The present study was carried out at Agra (AGR) as well as Delhi (DEL) during winter period from November 2011 to February 2012 of fine particulate (PM_2.5: d?<?2.5 μm) as well as associated carbonaceous aerosols. PM_2.5 was collected at both places using medium volume air sampler (offline measurement) and analyzed for organic carbon (OC) and elemental carbon (EC). Also, simultaneously, black carbon (BC) was measured (online) at DEL. The average mass concentration of PM_2.5 was 165.42?±?119.46 μg m^?3 at AGR while at DEL it was 211.67?±?41.94 μg m^?3 which is ~27 % higher at DEL than AGR whereas the BC mass concentration was 10.60 μg m^?3. The PM_2.5 was substantially higher than the annual standard stipulated by central pollution control board and United States Environmental Protection Agency standards. The average concentrations of OC and EC were 69.96?±?34.42 and 9.53?±?7.27 μm m^?3, respectively. Total carbon (TC) was 79.01?±?38.98 μg m^?3 at AGR, while it was 50.11?±?11.93 (OC), 10.67?±?3.56 μg m^?3 (EC), and 60.78?±?14.56 μg m^?3 (TC) at DEL. The OC/EC ratio was 13.75 at (AGR) and 5.45 at (DEL). The higher OC/EC ratio at Agra indicates that the formation of secondary organic aerosol which emitted from variable primary sources. Significant correlation between PM_2.5 and its carbonaceous species were observed indicating similarity in sources at both sites. The average concentrations of secondary organic carbon (SOC) and primary organic carbon (POC) at AGR were 48.16 and 26.52 μg m^?3 while at DEL it was 38.78 and 27.55 μg m^?3, respectively. In the case of POC, similar concentrations were observed at both places but in the case of SOC higher over AGR by 24 in comparison to DEL, it is due to the high concentration of OC over AGR. Secondary organic aerosol (SOA) was 42 % higher at AGR than DEL which confirms the formation of secondary aerosol at AGR due to rural environment with higher concentrations of coarse mode particles. The SOA contribution in PM_2.5 was also estimated and was ~32 and 12 % at AGR and DEL respectively. Being high loading of fine particles along with carbonaceous aerosol, it is suggested to take necessary and immediate action in mitigation of the emission of carbonaceous aerosol in the northern part of India.     

Nitrogen,Phosphorus, Carbon,and Suspended Solids Loads from Forest Clear-Cutting and Site Preparation: Long-Term Paired Catchment Studies from Eastern Finland

The long-term impacts of current forest management methods on surface water quality in Fennoscandia are largely unexplored. We studied the long-term effects of clear-cutting and site preparation on runoff and the export of total nitrogen (total N), total organic nitrogen (TON), ammonium (NH₄-N), nitrate (NO₃-N), total phosphorus (total P), phosphate (PO₄-P), total organic carbon, and suspended solids (SS) in three paired-catchments in Eastern Finland. Clear-cutting and soil preparation were carried out on 34 % (C34), 11 % (C11), and 8 % (C8) of the area of the treated catchments and wide buffer zones were left along the streams. Clear-cutting and soil preparation increased annual runoff and total N, TON, NO₃-N, PO₄-P, and SS loads, except for SS, only in C34. Runoff increased by 16 % and the annual exports of total N, TON, NO₃-N, and PO₄-P by 18, 12, 270, and 12 %, respectively, during the 14-year period after clear-cutting. SS export increased by 291 % in C34, 134 % in C11, and 16 % in C8 during the 14, 6, and 11-year periods after clear-cutting. In the C11 catchment, NO₃-N export decreased by 12 %. The results indicate that while current forest management practices can increase the export of N, P and SS from boreal catchments for many years (>10 years), the increases are only significant when the area of clear cutting exceeds 30 % of catchment area.     

Is the Water Footprint an Appropriate Tool for Forestry and Forest Products: The Fennoscandian Case

The water footprint by the Water Footprint Network (WF) is an ambitious tool for measuring human appropriation and promoting sustainable use of fresh water. Using recent case studies and examples from water-abundant Fennoscandia, we consider whether it is an appropriate tool for evaluating the water use of forestry and forest-based products. We show that aggregating catchment level water consumption over a product life cycle does not consider fresh water as a renewable resource and is inconsistent with the principles of the hydrologic cycle. Currently, the WF assumes that all evapotranspiration (ET) from forests is a human appropriation of water although ET from managed forests in Fennoscandia is indistinguishable from that of unmanaged forests. We suggest that ET should not be included in the water footprint of rain-fed forestry and forest-based products. Tools for sustainable water management should always contextualize water use and water impacts with local water availability and environmental sensitivity.     

Seasonal variations in cholinesterase activity, nerve conduction velocity and lung function among sprayers exposed to mixture of pesticides

Pesticide spraying operation is associated with the increased risk of adverse health effects among sprayers who do not follow safe farm work practices. A study was conducted among pesticide sprayers in North India to evaluate the clinical and subclinical variations in their vital health parameters before and after the pesticide spraying season. Blood cholinesterase levels, pulmonary function test, nerve conduction velocity and self-reported symptoms were studied among 18 eligible and consenting male sprayers. Mean acetylcholinesterase activity was reduced by 55 % in the post-exposure assessment (P?<?0.001) as compared to pre-exposure levels. Mean forced expiratory volume in 1 s was 20 % lower in the post-exposure assessment as compared to the pre-exposure level (P?<?0.05). No significant change was observed in the motor and sensory nerve conduction velocity in the median nerve of sprayers before and after the spraying activity. Also, no significant variation was observed with respect to self-reported symptoms except weakness in arms and legs (P?<?0.05). The significant decline in lung function and acetylcholinesterase level after pesticide exposure reflects the strongly negative effect of exposure to pesticides during spraying activity. More longitudinal studies among pesticide sprayers must be undertaken to further substantiate the cause–effect relationship between pesticide exposure and its subclinical effects. There is a strong necessity to minimise the exposure through the use of personal protective equipment in pesticide sprayers.