Eutrophication development and its key regulating factors in a water-supply reservoir in North China

Yanghe Reservoir is an important source of drinking water for Qinhuangdao City,North China;however,in recent decades this water source has been eutrophic with recurrent summer cyanobacterial blooms.The trophic grade of the system in summer was mesotrophiceutrophic in 1990 and became hypertrophic in 2011.The nutrient availability is extremely high during the entire year,and the water temperature should be the primary driver of the summer blooms.In May-October of 2010 and 2011,abrupt variations were observed in the Secchi depth(SD) and chlorophyll a(Chl-a),and both the correlated analysis of Chl-a-SD and trophic status indices(TSI) deviation(TSI Chl-a-TSI SD) showed that algal cell density dominated light attenuation.During the algal bloom outbreak,the microcystin concentration was found to vary between 0.35-2.12 μg/L in 2010 and 0.11-1.86 μg/L in 2011.The maximum microcystin content was more than two times the safety limit required for drinking water.Inflow discharges were most concentrated in the summer,with periods of lower residence time and the largest water level fluctuation over the entire year.When a high availability of nutrients promoted a high Chl-a concentration in the whole system,it appeared that the instability caused by the decrease in residence time could not produce effective changes in the cyanobacterial abundance.The results indicated that nutrient enrichment in the aquatic systems of Yanghe Reservoir is the most serious problem and that the status would not been modified effectively by increasing hydrological fluctuations(e.g.,decreasing the residence time).Therefore,decreasing the nutrient concentrations is the only route to improve the water quality of this reservoir.     

Speciation of organic phosphorus in a sediment profile of Lake Taihu II. Molecular species and their depth attenuation

The understanding of organic phosphorus(P) dynamics in sediments requires information on their species at the molecular level,but such information in sediment profiles is scarce.A sediment profile was selected from a large eutrophic lake,Lake Taihu(China),and organic P species in the sediments were detected using solution phosphorus-31 nuclear magnetic resonance spectroscopy(31 P NMR) following extraction of the sediments with a mixture of 0.25 mol/L NaOH and 50 mmol/L EDTA(NaOH-EDTA) solution.The results showed that P in the NaOH-EDTA extracts was mainly composed of orthophosphate,orthophosphate monoesters,phospholipids,DNA,and pyrophosphate.Concentrations of the major organic P compound groups and pyrophosphate showed a decreasing trend with the increase of depth.Their half-life times varied from 3 to 27 years,following the order of orthophosphate monoesters > phospholipids DNA > pyrophosphate.Principal component analysis revealed that the detected organic P species had binding phases similar to those of humic acid-associated organic P(NaOH-NRP HA),a labile organic P pool that tends to transform to recalcitrant organic P pools as the early diagenetic processes proceed.This demonstrated that the depth attenuation of the organic P species could be partly attributed to their increasing immobilization by the sediment solids,while their degradation rates should be significantly lower than what were suggested in previous studies.     

X射线光电子能谱在HTPB推进剂老化机理研究中的应用

采用X射线光电子能谱（XPS）法研究了HTPB推进剂在80℃热空气烘箱内分别老化0周、13周和24周的元素组成、化学价态及含量变化。通过拟合C,O,N,Cl等元素的XPS谱图,推测该推进剂在常温（25℃）贮存老化初期应是氧化交联,后期则出现降解断链,并认为NH4ClO4缓慢分解,攻击C C不饱和双键,使得C C双键含量降低是HTPB推进剂老化失效的主要原因。Al粉被包裹在推进剂粘合剂内部,XPS法未能检出Al粉。由于Al粉比较稳定,不参与推进剂老化过程,故XPS仍可用于HTPB推进剂老化机理研究。     

储罐钢08MnNiVR和SPV490Q在石油沉积水中腐蚀性能对比

采用电化学试验、浸泡试验和慢应变速率拉伸试验研究储罐钢08MnNiVR和SPV490Q在石油沉积水中的腐蚀性能差异。电化学试验结果表明,08MnNiVR在石油沉积水中的自腐蚀电流比SPV490Q略大。浸泡试验结果表明,中短期试验时,08MnNiVR的腐蚀率略大;较长期试验时,SPV490Q的腐蚀率略大。慢应变速率拉伸试验结果表明,08MnNiVR和SPV490Q在石油沉积水中均具有高应力腐蚀抗力。     

基于正交变频的无线电扩频信标设计与实现

无线电信标是船载无线电测控设备进行动态自检和角度标校的必需设备。提出了一种基于正交变频技术的信标设计方法,通过单片机控制实现了信标参数的灵活设置,在电路实现上则采取了抑制边带和本振泄露的措施。该信标工作可靠,性能满足需求,实际应用取得了良好的效果,为船载无线电测控设备的海上标校提供了技术保障。     

LD2铝合金腐蚀行为研究

LD2铝合金广泛应用于直升机结构中。铝合金构件在服役过程中会承受环境所造成的疲劳损伤,从而大大降低其服役寿命,因此必须要研究该材料的腐蚀行为。利用SEM扫描电镜,结合能谱分析对铝合金腐蚀损伤行为进行了高精度微尺度研究,并在疲劳断口上发现腐蚀坑底部的“隧道”,该腐蚀隧道会使腐蚀损伤评定过于保守,为结构寿命预测带来较大的不确定性。     

飞机起落架常见故障及原因分析

针对飞机起落架收放作动筒活塞杆划伤、轮轴磨损腐蚀、刹车盘异常磨损、下位锁开锁故障及收放摇臂裂纹等几种典型故障,从结构设计、材料、制造工艺、使用环境和日常维护几个方面分析了各故障产生的原因,提出了预防故障发生的建议,为今后飞机起落架设计提供参考和借鉴。     

基于可靠性统计分析法的制导弹药储存寿命评估

针对制导弹药价格昂贵而无法采用大规模性能试验和实弹射击方法进行可靠性研究的问题,采用可靠性统计分析法对制导弹药储存寿命进行评估。通过建立制导弹药可靠储存寿命模型,并以制导弹药火工品中的待发程控装置为研究对象,运用Bayes法对试验数据出现的＂倒挂＂现象进行了修正。依据修正后的试验数据进行计算,得到了在一定置信度下待发程控装置的储存寿命。     

蜂窝流道热沉强化传热数值模拟

热沉是模拟太空深冷环境的核心部件。为提高空间深冷环境的模拟效果,更好地满足型号试验需求,设计了一种蜂窝流道热沉。利用流体力学理论和有限元方法对蜂窝热沉内部流体的流动和强化传热进行数值模拟,分析流道结构参数对流体流动和换热的影响,确定最优的流道结构参数。结果表明,同等条件下蜂窝热沉表面温度低于管板式热沉5 K左右,温度均匀性可达到±2 K;流道深度和间距是影响流体在热沉中流动与传热的重要因素,合理选择流道结构参数可以提高热沉的换热性能;需要综合考虑传热和阻力问题来确定最优的流道结构参数,最优的蜂窝热沉流道间距为75 mm,深度为10 mm。     

ESS试验温度循环次数确定方法研究

介绍了环境应力筛选温度循环试验数学模型,通过雷达单元实际筛选数据统计建模计算,在相同的温度范围、温变速率条件下,进行筛选度和循环次数的理论与实际数据对比分析,得出了确定雷达组成电子单元温度循环试验循环次数的方法和修正系数。