Characterization of organic coatings on hygroscopic salt particles and their atmospheric impacts

The photooxidation of α-pinene in the presence of NO₂, with and without added NaNO₃ seed particles, has been studied in a large-diameter flow tube. Particles formed by homogeneous nucleation and by condensation on the pre-existing seeds were sampled at various stages of the reaction, dried using four diffusion dryers, size selected at different mobility diameters (d_m) using a differential mobility analyzer (DMA), and characterized with a single particle mass spectrometer (SPLAT II). It was found that homogeneously nucleated particles are spherical, have a density (ρ) of 1.25 ± 0.02 g cm^?3 (±2σ) and contain a significant amount of organic nitrates. The mass spectra of the low volatility products condensed on the NaNO₃ seed particles were found to be virtually the same as in the case of homogeneous nucleation. The data show that the presence of even a submonolayer of organics on the NaNO₃ particles causes water retention that leads to a decrease in particle density and that the amount of water retained increases with organic coating thickness. Thicker coatings appear to inhibit water evaporation from the particle seeds altogether. This suggests that in the atmosphere, where low volatility organics are plentiful, some hygroscopic salts will retain water and have different densities and refractive indices than expected in the absence of the organic coating. This water retention combined with the organic shell on the particles can potentially impact light scattering by these particles and activity as cloud condensation nuclei (CCN), as well as heterogeneous chemistry and photochemistry on the particles.     

Toxic atmospheric pollutants from crematoria ovens: characterization,emission factors,and modeling

Environmental Science and Pollution Research - Human remains and corpses’ cremation is an increasing practice worldwide alternative to burials, which have increased their cost and reduced...     

Contamination from electrically conductive silicone tubing during aerosol chemical analysis

Electrically conductive silicone tubing is used to minimize losses in sampling lines during the analysis of airborne particle size distributions and number concentrations. We report contamination from this tubing using gas chromatography–mass spectrometry (GC–MS) of filter-collected samples as well as by particle mass spectrometry. Comparison of electrically conductive silicone and stainless steel tubing showed elevated siloxanes only for the silicone tubing. The extent of contamination increased with length of tubing to which the sample was exposed, and decreased with increasing relative humidity.     

UV treatment of microorganisms on artificially-contaminated surfaces using excimer and microwave UV lamps

An XeBr excilamp having a peak emission at 283 nm, and microwave UV lamps with peak emissions at 253.7 nm that also generate ozone, have been tested for ability to eradicate high populations of microbial vegetative cells and spores (of bacteria and fungi) artificially added to filter surfaces. The study examined the energy required to completely eradicate large populations on filter surfaces. It was found that both the excilamp and microwave UV lamps were effective at killing large populations on surfaces with killing efficiency dependant on the type of organism, and, whether present in its vegetative or spore forms. The main killing factor is UV radiation following short treatment times. It is considered that for longer irradiation periods that are required to facilitate complete destruction of surface microorganisms, ozone and other oxidising species produced by microwave UV lamps would act to enhance microbial destruction.     

Assessing urban runoff program progress through a dry weather hybrid reconnaissance monitoring design

Characterizing dry weather conditions in urban Municipal Separate Storm Sewer Systems (MS4s), and then prioritizing and addressing problems due to urban pollutants, is a daunting challenge. The size and complexity of most MS4s and the ephemeral nature of many dry weather problems hamper efforts to identify and eliminate pollutant sources, and to track trends in condition. As a result, assessing overall program progress has proven difficult. We describe a hybrid dry weather urban monitoring design from southern California that combines probabilistic and targeted sampling to rigorously identify and prioritize problems and track program progress. Data from probabilistic sites define the urban background and establish tolerance intervals, which identify sites that persistently exceed the overall urban background. Targeted sites focus on locations where nearby activities and/or past history suggest that pollutant levels will be elevated. Embedding targeted monitoring within a probabilistic design enables data from targeted sites to be interpreted in a more meaningful regional context. Data from all sites are also used to construct site- and pollutant-specific control charts. These charts quickly identify instances where a site's behavior significantly changes, compared to its past behavior, suggesting an active source in the upstream drainage area. The hybrid design, and the use of formal statistical tools (tolerance intervals and control charts), permit the program to systematically prioritize problematic sites, compare conditions to the regional urban background, and track trends over time. In addition, the program's design allows several measures of program progress to be defined and thus consistently followed over time. Such hybrid designs can provide substantial advantages compared to more traditional monitoring approaches.     

Programs assessing implementation and effectiveness of state forest practice rules and BMPs in the West

The major forest nonpoint source control programs in the West are largely regulatory, either under forest practices acts (California, Idaho, New Mexico, Nevada, Oregon, and Washington) or a streamside management act (Montana). These programs and the specific rules they enforce continue to undergo intensive scrutiny. Still, the questions are the same for these regulatory programs as for states that base nonpoint source control on voluntary BMPs (Arizona, Colorado, Utah, Wyoming). Are the rules or BMPs being applied, and are they effective in reducing nonpoint source pollution to levels that protect beneficial uses of water? The level of debate about forestry in the West has resulted in detailed monitoring and research to answer these questions. In the past, state agencies have assumed levels of BMP compliance based on the percent of operations without enforcement actions. These estimates are being replaced by statistically valid and reproducible monitoring of forest practices rules and BMP compliance levels. BMP effectiveness is being assessed using both qualitative and quantitative methods. This can involve field assessments, process-based research, and control watershed studies. Some trend monitoring is also beginning. With the regional implementation rate for forestry BMPs at about 94% and rising, it is likely that effectiveness testing will continue to be a priority and consume the majority of assessment resources for this region.     

Does small mammal prey guild affect the exposure of predators to anticoagulant rodenticides?

Ireland has a restricted small mammal prey guild but still includes species most likely to consume anticoagulant rodenticide (AR) baits. This may enhance secondary exposure of predators to ARs. We compared liver AR residues in foxes (Vulpes vulpes) in Northern Ireland (NI) with those in foxes from Great Britain which has a more diverse prey guild but similar agricultural use of ARs. Liver ARs were detected in 84% of NI foxes, more than in a comparable sample of foxes from Scotland and similar to that of suspected AR poisoned animals from England and Wales. High exposure in NI foxes is probably due to greater predation of commensal rodents and non-target species most likely to take AR baits, and may also partly reflect greater exposure to highly persistent brodifacoum and flocoumafen. High exposure is likely to enhance risk and Ireland may be a sentinel for potential effects on predator populations.     

Amazon River dissolved load: temporal dynamics and annual budget from the Andes to the ocean

The aim of the present study is to estimate the export fluxes of major dissolved species at the scale of the Amazon basin, to identify the main parameters controlling their spatial distribution and to identify the role of discharge variability in the variability of the total dissolved solid (TDS) flux through the hydrological cycle. Data are compiled from the monthly hydrochemistry and daily discharge database of the “Programa Climatologico y Hidrologico de la Cuenca Amazonica de Bolivia” (PHICAB) and the HYBAM observatories from 34 stations distributed over the Amazon basin (for the 1983–1992 and 2000–2012 periods, respectively). This paper consists of a first global observation of the fluxes and temporal dynamics of each geomorphological domain of the Amazon basin. Based on mean interannual monthly flux calculations, we estimated that the Amazon basin delivered approximately 272?×?10⁶ t year^?1 (263–278) of TDS during the 2003–2012 period, which represents approximately 7 % of the continental inputs to the oceans. This flux is mainly made up by HCO₃, Ca and SiO₂, reflecting the preferential contributions of carbonate and silicate chemical weathering to the Amazon River Basin. The main tributaries contributing to the TDS flux are the Marañon and Ucayali Rivers (approximately 50 % of the TDS production over 14 % of the Amazon basin area) due to the weathering of carbonates and evaporites drained by their Andean tributaries. An Andes–sedimentary area–shield TDS flux (and specific flux) gradient is observed throughout the basin and is first explained by the TDS concentration contrast between these domains, rather than variability in runoff. This observation highlights that, under tropical context, the weathering flux repartition is primarily controlled by the geomorphological/geological setting and confirms that sedimentary areas are currently active in terms of the production of dissolved load. The log relationships of concentration vs discharge have been characterized over all the studied stations and for all elements. The analysis of the slope of the relationship within the selected contexts reveals that the variability in TDS flux is mainly controlled by the discharge variability throughout the hydrological year. At the outlet of the basin, a clockwise hysteresis is observed for TDS concentration and is mainly controlled by Ca and HCO₃ hysteresis, highlighting the need for a sampling strategy with a monthly frequency to accurately determine the TDS fluxes of the basin. The evaporite dissolution flux tends to be constant, whereas dissolved load fluxes released from other sources (silicate weathering, carbonate weathering, biological and/or atmospheric inputs) are mainly driven by variability in discharge. These results suggest that past and further climate variability had or will have a direct impact on the variability of dissolved fluxes in the Amazon. Further studies need to be performed to better understand the processes controlling the dynamics of weathering fluxes and their applicability to present-day concentration–discharge relationships at longer timescales.     

Assessing multiple novel tracers to improve the understanding of the contribution of agricultural farm waste to diffuse water pollution

A study was undertaken on drained and undrained 1 ha grassland lysimeters to assess the effectiveness of multiple novel tracing techniques in understanding how agricultural slurry waste moves from land to water. Artificial fluorescent particles designed to mimic the size and density of organic slurry particles were found to move off the grassland via inter-flow (surface + lateral through-flow) and drain-flow. Where both pathways were present the drains carried the greater number of particles. The results of the natural fluorescence and δ13C of water samples were inconclusive. Natural fluorescence was higher from slurry-amended lysimeters than from zero-slurry lysimeters, however, a fluorescence decay experiment suggested that no slurry signal should be present given the time between slurry application and the onset of drainage. The δ13C values of >0.7 microm and <0.7 microm material in drainage were varied and unrelated to discharge. The mean value of >0.7 microm δ13C in water from the drain-flow pathways was higher from the lysimeter which had received naturally enriched maize slurry compared to the lysimeter which received grass slurry indicating a contribution of slurry-derived material. Values of <0.7 microm δ13C from the same pathway, however, produced counter intuitive trends and may indicate that different fractions of the slurry have different δ13C values.     

Changes in surface water quality from small-scale gold mining operations in the Surinamean rainforest

Abstract

Small-scale miners often engage in environmentally damaging activities, are subject to poor safety conditions, and utilize inefficient mineral extraction technologies. Here, we explore environmental impacts to surface waters from regional artisanal small-scale gold placer mining operations conducted in iron and aluminum-rich saprolites found within the lateritic, interior Amazon rainforest of Suriname. Heavy equipment was utilized to release gold from its host material followed by amalgamation and gravity separation. In contrast with background tributary recordings, streams adjacent to these gold mining operations consistently contained turbidity measurements that exceeded United States’ EPA guidelines for aquatic species of 50 nephelometric turbidity units and were typically in the hundreds to thousands of units. Turbidity was further heightened in association with precipitation events. Mercury played a prominent role in whole ore amalgam concentration practices. Freshwater fish from the region were found to harbor mercury that encroached upon public health criteria. Dissolved phase metals present further ecotoxicological challenges to the region, but their association with mining activities was less clear. These findings collectively reveal that small-scale placer gold mining practices in the Surinamese rainforest result in an increase of suspended sediments and release of mercury into waterways that could impact communities that depend upon local fisheries.