2D brine sewage after impinging on a shallow sea free surface

We consider the problem of the vertically upwards disposal of heavy brine sewage from a two-dimensional diffuser in a lighter, homogeneous, motionless and shallow ambient sea. The rejected high salinity water of seawater desalination plants for urban and agricultural uses is such a case of a two dimensional fountain. The disposal of brine sewage produces a negative buoyant jet due to its initial momentum, which impinges on the free surface, spreads laterally on it and then sinks downwards, because of the negative buoyancy. Laboratory experiments and dimensional considerations are used in this paper in order to investigate the spreading behavior (width) of the vertical fountain which impinges on the free surface of the shallow ambient fluid. The experimental results have been used to derive an equation relating the width at the free surface with the initial parameters of the flow. In addition, the experimentally measured dilution of the heavier brine sewage on the recipient’s surface is compared with the dilution which was calculated by a numerical simulation of a well-known commercial software package, CORJET (a CORMIX sub model).     

Simulation of dam/levee-break hydrodynamics with a three-dimensional implicit unstructured-mesh finite element model

Dam failures usually cause huge economic and life losses , especially in urban areas where there is a high concentration of inhabitants and economic actors. In order to understand the physical mechanisms of the formation and development of dam-break flooding, lots of efforts have been put into different types of modelling techniques. However, most of existing models are 1D (one-dimensional) or 2D models based on the shallow water equations. In this paper, we present a 3D numerical modelling investigation of dam-break flow hydrodynamics in an open L-shape channel. A newly developed 3D unstructured mesh finite element model is used here. An absorption-like term is introduced to the Navier–Stokes equations in order to control the conditioning of the matrix equation in the numerical solution process and thus improve the stability. A wetting and drying algorithm is used here to allow the free surface height to be treated with a high level of implicitness and stability. The 3D model has been validated by comparing the results with the published experimental data. Good agreement has been achieved at six selected locations. This study shows that the 3D unstructured mesh model is capable of capturing the 3D hydraulic aspects and complicated local flows around structures in simulation of dam-break flows.     

The progress of interdisciplinarity in invasion science

Interdisciplinarity is needed to gain knowledge of the ecology of invasive species and invaded ecosystems, and of the human dimensions of biological invasions. We combine a quantitative literature review with a qualitative historical narrative to document the progress of interdisciplinarity in invasion science since 1950. Our review shows that 92.4% of interdisciplinary publications (out of 9192) focus on ecological questions, 4.4% on social ones, and 3.2% on social–ecological ones. The emergence of invasion science out of ecology might explain why interdisciplinarity has remained mostly within the natural sciences. Nevertheless, invasion science is attracting social–ecological collaborations to understand ecological challenges, and to develop novel approaches to address new ideas, concepts, and invasion-related questions between scholars and stakeholders. We discuss ways to reframe invasion science as a field centred on interlinked social–ecological dynamics to bring science, governance and society together in a common effort to deal with invasions.     

Differential blood counting in fish as a non-destructive biomarker of water contamination exposure

Differential white blood cell counting was performed on blood from the fish species Oreochromis niloticus and was used as an in situ indicator of the species’ exposure to contamination. Ten young fish were collected in an area influenced by the discharge of effluents and from a fish farm (control group). The fish were anesthetized and caudal puncture was used to collect the blood. Differential white blood cell counting was performed, as well as the counting of total leukocytes and thrombocytes (in 2000 cells). Physicochemical parameters of the water from both sites were analyzed. The water from the polluted area was found to have high conductivity and low levels of dissolved oxygen, factors that indicate poor environmental quality. Fish collected from the polluted site presented higher percentages of eosinophils and monocytes and fewer thrombocytes because of exposure to pollution and hypoxic conditions. The differential white blood cell count represents a suitable biomarker of environmental health and provides a tool for biomonitoring water quality.     

Comprehensive estimate of the theoretical maximum daily intake of pesticide residues for chronic dietary risk assessment in Argentina

A chronic dietary risk assessment for pesticide residues was conducted for four age groups of the Argentinian population following the procedure recommended by the WHO. The National Theoretical Maximum Daily Intake (NTMDI) for 308 pesticides was calculated for the first time, using the Maximum Residue Limits (MRLs) from several Argentinean regulations and food consumption data from a comprehensive National Nutrition and Health Survey. The risk was estimated by comparing the TMDI with the Acceptable Daily Intakes (ADI) identified by various sources. Furthermore, for each of the compounds with a TMDI >65% of the ADI, a probabilistic analysis was conducted to quantify the probability of exceeding the ADI. In this study 27, 22, 10, and 6 active ingredients (a.i.) were estimated to exceed the 100% of the ADI for the different population groups: 6–23 month-old children, 2–5 year-old children, pregnant women, and 10–49 year-old women, respectively. Some of these ADI-exceeding compounds (carbofuran, diazinon, dichlorvos, dimethoate, oxydemeton-methyl and methyl bromide) were found in all four of these groups. Milk, apples, potatoes, and tomatoes were the foods that contributed most to the intake of these pesticides. The study is of primary importance for the improvement of risk assessment, regulations, and monitoring activities.     

Biosurfactants during in situ bioremediation: factors that influence the production and challenges in evalution

Research on the influence of biosurfactants on the efficiency of in situ bioremediation of contaminated soil is continuously growing. Despite the constant progress in understanding the mechanisms involved in the effects of biosurfactants, there are still many factors that are not sufficiently elucidated. There is a lack of research on autochthonous or exogenous microbial metabolism when biostimulation or bioaugmentation is carried out to produce biosurfactants at contaminated sites. In addition, studies on the application of techniques that measure the biosurfactants produced in situ are needed. This is important because, although the positive influence of biosurfactants is often reported, there are also studies where no effect or negative effects have been observed. This review aimed to examine some studies on factors that can improve the production of biosurfactants in soils during in situ bioremediation. Moreover, this work reviews the methodologies that can be used for measuring the production of these biocomposts. We reviewed studies on the potential of biosurfactants to improve the bioremediation of hydrocarbons, as well as the limitations of methods for the production of these biomolecules by microorganisms in soil.     

The influence of light exposure,water quality and vegetation on the removal of sulfonamides and tetracyclines: A laboratory-scale study

The effect of aquatic vegetation (Spyrogira sp. and Zannichellia palustris), light exposure and water quality (secondary-treated wastewater vs. ultrapure water) on the removal efficiency of six antibiotics (sulfonamides and tetracyclines) is studied in laboratory-scale reactors. After 20 d of treatment, 3–59% of sulfonamides were eliminated in the reactors exposed to light. Removal was about 10% in unplanted reactors in darkness. The elimination of tetracycline (TC) and oxytetracycline (OTC) ranged between 83% and 97% in both planted and unplanted reactors. However, in dark unplanted reactors, OTC was largely removed (88%) while only 15% of TC was eliminated. These results suggest that TC was mainly removed by photodegradation whereas biodegradation or hydrolysis process seems to be significant processes for OTC. Sulfonamides were mainly eliminated by biodegradation or indirect photodegradation processes. Pseudo-first order kinetics removal rates ranged from 0.003 and 0.007 d^?1 for Sulfamethazine and TC in the covered control reactors to 0.13 and 0.21 d^?1 for TC and OTC in the uncovered control reactors, with half-lives from 3 to 350 d. A TC photodegradation product was tentatively identified in uncovered reactors. This study highlights the important role played by light exposure in the elimination of antibiotics in polishing ponds.     

Comparative acute toxicity of two phytosanitary molecules,lambda-cyhalothrin and acetamiprid,on Nile Tilapia (Oreochromis Niloticus) juveniles

Abstract

This study aimed to compare the toxicity for fish of two active ingredients (lambda-cyhalothrin-20?g L^?1, a pyrethroid, and acetamiprid-15?g L^?1, a neonicotinoid) which are components of a commercial insecticide (Acer 35 EC) used in cotton crop in many West African countries. The juveniles of Oreochromis niloticus (4.01?±?0.34?g, mean body weight) were exposed for 96?h to increasing concentrations of active ingredients (lambda-cyhalothrin and acetamiprid) or a mixture similar to Acer 35 EC (composed by 20?g of chemical compound lambda-cyhalothrin and 15?g of acetamiprid dissolved in 1?L of acetone). The experiments were carried out under controlled conditions in aquaria according to OECD Guidelines. During the experiments, the behavioral responses (loss of balance, color change, hyperactivity, etc.) that usually precede death were observed in exposed fish. Mortalities were recorded in each aquarium and the LC₅₀-96h of each chemical was determined. The LC₅₀-96h obtained were respectively 0.1268, 0.0029, 182.9 and 0.5685?ppm for Acer 35 EC, lambda-cyhalothrin, acetamiprid and mixture. All insecticides used in this study had profound impact on Nile tilapia behavior which may confirm the neurotoxicity of each single active compound as well as of their mixture.     

Use of cholinesterase activity in monitoring chlorpyrifos exposure of steer cattle after topical administration

The aim of this work was to study the pharmacokinetic behavior and the inhibitory effect of acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activities of chlorpyrifos (CPF) in steer cattle after pour-on administration. Determination of cholinesterase activity in plasma and erythrocyte was carried out according to Ellman kinetic method. CPF was analyzed by gas chromatography. AChE was the predominant form of cholinesterase analyzed, with low levels of BChE in plasma. Following the treatment with CPF, the maximum inhibitory effect on AChE or BChE were 50.88 ± 11.57 and 42.66 ± 12.01%, respectively. The chlorpyrifos plasma concentrations observed were low and they presented a high variability. Chlorpyrifos peak plasma concentration (10.42 ± 4.76 μ g/L) was reached at 8.42 ± 13.97 h. The pesticide was not detected in plasma after 48 h post treatment. The values of area under the curve (AUC) were 118.48 ± 87.46 μ g· h/L and mean resistance time (MRT) were 13.38 ± 10.41 h. The pour-on exposure to the organophosphate chlorpyrifos significantly reduced AChE and BChE activity in steer cattle and the recovery was not reached on 50 days post-treatment.     

Treatment of wastewater from red and tropical fruit wine production by zeolite anaerobic fluidized bed reactor

A study of the anaerobic treatment of wastewaters derived from red (RWWW) and tropical fruit wine (TFWWW) production was carried out in four laboratory-scale fluidized bed reactors with natural zeolite as bacterial support. These reactors operated at mesophilic temperature (35°C). Reactors R1 and R2 contained Chilean natural zeolite, while reactors R3 and R4 used Cuban natural zeolite as microorganism support. In addition, reactors R1 and R3 processed RWWW, while reactors R2 and R4 used TFWWW as substrate. The biomass concentration attached to zeolites in the four reactors studied was found to be in the range of 44–46 g volatile solids (VS)/L after 90 days of operation time. Both types of zeolites can be used indistinctly in the fluidized bed reactors achieving more than 80%–86% chemical oxygen demand (COD) removals for organic loading rates (OLR) of up to at least 20 g COD/L d. pH values remained within the optimal range for anaerobic microorganisms for OLR values of up to 20 and 22 g COD/L d for RWWW and TFWWW, respectively. Toxicity and inhibition levels were observed at an OLR of 20 g COD/L d in reactors R1 and R3 while processing RWWW, whereas the aforementioned inhibitory phenomena were not observed at an OLR of 24 g COD/L d in R2 and R4, treating TFWWW as a consequence of the lower phenolic compound content present in this substrate. The volatile fatty acid (VFA) levels were always lower in reactors processing TFWWW (R2 and R4) and these values (< 400 mg/L, as acetic acid) were lower than the suggested limits for digester failure. The specific methanogenic activity (SMA) was twice as high in reactors R2 and R4 than in R1 and R3 after 120 days of operation when all reactors operated at an OLR of 20 g COD/L d.