Concentrations and sources of Dechlorane Plus in sewage sludge

Sewage sludge from 31 urban Spanish wastewater treatment plants (WWTP) was analyzed for the emerging halogenated flame retardant Dechlorane Plus (DP). Concentrations of the two major isomers in the technical mixture, syn and anti, ranged between 0.903-19.2 and 1.55-75.1 ng g⁻¹ dry weight, respectively. Overall, concentrations of DP were lower than those of polybrominated diphenyl ethers (PBDEs) (9.10-995 ng g⁻¹ dry weight) and this is likely related to the higher usage of brominated flame retardants. The average ratio of the syn isomer to total DP (f_syn) was 0.28 ± 0.05, which is similar to that of the commercial mixture. Comparing different wastewater treatment methods, we found lower concentrations in those using biological nitrogen and phosphorous elimination, suggesting that DP is susceptible to microbial degradation and that anti-DP is more so, given the enrichment of syn-DP in the sewage sludge. Principal components analysis revealed significant positive correlation (r = 0.619, p < 0.05) between total DP concentrations with the contribution of industrial input to waste streams. This implies release of DP is related to industrial activity, likely stemming from the use of the technical product during manufacture of consumer goods. However, use and disposal of products containing DP could not be dismissed. According to our knowledge, this is the first report on DP in WWTP sludge.     

Performance evaluation of a biotrickling filter treating a mixture of oxygenated VOCs during intermittent loading

Laboratory scale-studies on the biodegradation of a 1:1:1 weight mixture of three oxygenated volatile organic compounds (VOCs), ethanol, ethyl acetate, and methyl-ethyl ketone (MEK) in a biotrickling filter (BTF) were carried out using two identically sized columns, filled with different polypropylene rings. The performance of the BTFs was examined for a period of 10 months applying several operational strategies. Similar performance was obtained for both supports. Intermittent flow rate of trickling liquid was shown beneficial to improve the removal efficiency (RE). Continuous feeding of VOC resulted in an excessive accumulation of biomass so high pressure drop was developed in less than 20-30 d of operation. Intermittent VOC loading with night and weekend feed cut-off periods passing dry air, but without addition of water, was shown as a successful operational mode to control the thickness of the biofilm. In this case, operation at high inlet loads (ILs) was extended for more than 75 d maintaining high REs and low pressure drops. Outlet emission concentrations lower than 100 mg Cm(-3) were obtained for ILs up to 100 g Cm(-3)h(-1) working at 15s of empty bed residence time. The most easily biodegradable compounds ethanol and ethyl acetate were used primarily than MEK. After a 3-wk-starvation period, the system performance was almost restored since the first d of operation, being the removal of the less biodegradable compound, MEK, partially deteriorated.     

Socioeconomic consequences of mercury use and pollution

In the past, human activities often resulted in mercury releases to the biosphere with little consideration of undesirable consequences for the health of humans and wildlife. This paper outlines the pathways through which humans and wildlife are exposed to mercury. Fish consumption is the major route of exposure to methylmercury. Humans can also receive toxic doses of mercury through inhalation of elevated concentrations of gaseous elemental mercury. We propose that any effective strategy for reducing mercury exposures requires an examination of the complete life cycle of mercury. This paper examines the life cycle of mercury from a global perspective and then identifies several approaches to measuring the benefits of reducing mercury exposure, policy options for reducing Hg emissions, possible exposure reduction mechanisms, and issues associated with mercury risk assessment and communication for different populations.     

Cyanidation of mercury-rich tailings in artisanal and small-scale gold mining: identifying strategies to manage environmental risks in Southern Ecuador

In many countries, such as Brazil, Colombia, Ecuador, Indonesia, Venezuela and Zimbabwe, amalgamated tailings are leached with cyanide to recover remaining gold. This paper describes a recently completed study conducted at seven gold processing centers in Portovelo-Zaruma, Southern Ecuador, which involved consultation with local miners. The objective of the study was to understand the behaviour of mercury (with a focus on mercury loss) in artisanal gold mining operations through the evaluation of two cyanidation processes (Merrill-Crowe and Carbon-in-pulp), using a participatory approach. In order to assess the kinetics of mercury dissolution in cyanide, a bottle roll test was conducted in the laboratory. In the Merrill-Crowe cyanidation process, an average of 24.2% of metallic mercury was determined to be trapped at the bottom of the agitation tanks; 33.1% of mercury is lost in association with solid material and 11.7% is lost in solution. Approximately 31.0% of mercury in solution is sent to the zinc precipitation cells from which 27.8% is precipitated on the zinc shavings, with 3.23% remaining in solution. The mercury precipitated on to the zinc is lost to the atmosphere when the shavings are burned at 900 °C. In the Carbon-in-pulp (CIP) leaching system, 11.2% of the mercury is lost with the solid tailings; 31.6% of the mercury is associated with fine particles in suspension and 50.8% is likely dissolved. About 2.68% is trapped at the bottom of the tank and 3.72% is absorbed by the activated carbon. The bottle roll test revealed that mercury dissolution is directly proportional to cyanide concentration. At 10 g/ton of cyanide, approximately 42% of mercury was leached, whereas all gold was solubilized. During this study, miners recognized the risk associated with the cyanidation of mercury-rich tailings, and were aware of how much mercury is discharged to local streams and to the atmosphere. The active participation of miners in this study has led to the strengthening of their knowledge and awareness of mercury contamination, and has enhanced their understanding of the nature of the problem, as well as the weaknesses and strengths of the system they operate.     

Turning Scientific Approaches into Practical Conservation Actions: The Case of Comunidad Indigena de Nuevo San Juan Parangaricutiro, Mexico

Optimum natural resource management and biodiversity conservation are desirable goals. These, however, often exclude each other, since maximum economic benefits have promoted drastic reductions in biodiversity throughout the world. This dilemma confronts local stakeholders, who usually go for maximizing economic inputs, whereas other social (e.g., academic) sectors are favor conservation practices. In this paper we describe the way two scientific approaches—landscape and participatory research—were used to develop sound and durable land use scenarios. These two approaches included expert knowledge of both social and environmental conditions in indigenous communities. Our major emphasis was given to detect spatially explicit land use scenarios and capacity building in order to construct a decision support system operated by stakeholders of the Comunidad Indigena de Nuevo San Juan Parangaricutiro in Mexico. The system for decision-making was fed with data from inventories of both abiotic and biotic biodiversity components. All research, implementation, and monitoring activities were conducted in close collaboration with members of the indigenous community. As a major result we obtained a number of forest alternative uses that favor emerging markets and make this indigenous community less dependent on a single market. Furthermore, skilled members of the community are now running the automated system for decision-making. In conclusion, our results were better expressed as products with direct benefits in local livelihoods rather than pure academic outputs.     

Mining with communities

To be considered as sustainable, a mining community needs to adhere to the principles of ecological sustainability, economic vitality and social equity. These principles apply over a long time span, covering both the life of the mine and post-mining closure. The legacy left by a mine to the community after its closure is emerging as a significant aspect of its planning. Progress towards sustainability is made when value is added to a community with respect to these principles by the mining operation during its life cycle. This article presents a series of cases to demonstrate the diverse potential challenges to achieving a sustainable mining community. These case studies of both new and old mining communities are drawn mainly from Canada and from locations abroad where Canadian companies are now building mines. The article concludes by considering various approaches that can foster sustainable mining communities and the role of community consultation and capacity building.     

Efficient and equitable design of marine protected areas in Fiji through inclusion of stakeholder‐specific objectives in conservation planning

The efficacy of protected areas varies, partly because socioeconomic factors are not sufficiently considered in planning and management. Although integrating socioeconomic factors into systematic conservation planning is increasingly advocated, research is needed to progress from recognition of these factors to incorporating them effectively in spatial prioritization of protected areas. We evaluated 2 key aspects of incorporating socioeconomic factors into spatial prioritization: treatment of socioeconomic factors as costs or objectives and treatment of stakeholders as a single group or multiple groups. Using as a case study the design of a system of no‐take marine protected areas (MPAs) in Kubulau, Fiji, we assessed how these aspects affected the configuration of no‐take MPAs in terms of trade‐offs between biodiversity objectives, fisheries objectives, and equity in catch losses among fisher stakeholder groups. The achievement of fisheries objectives and equity tended to trade‐off concavely with increasing biodiversity objectives, indicating that it is possible to achieve low to mid‐range biodiversity objectives with relatively small losses to fisheries and equity. Importantly, the extent of trade‐offs depended on the method used to incorporate socioeconomic data and was least severe when objectives were set for each fisher stakeholder group explicitly. We found that using different methods to incorporate socioeconomic factors that require similar data and expertise can result in plans with very different impacts on local stakeholders.     

Building robust conservation plans

Systematic conservation planning optimizes trade‐offs between biodiversity conservation and human activities by accounting for socioeconomic costs while aiming to achieve prescribed conservation objectives. However, the most cost‐efficient conservation plan can be very dissimilar to any other plan achieving the set of conservation objectives. This is problematic under conditions of implementation uncertainty (e.g., if all or part of the plan becomes unattainable). We determined through simulations of parallel implementation of conservation plans and habitat loss the conditions under which optimal plans have limited chances of implementation and where implementation attempts would fail to meet objectives. We then devised a new, flexible method for identifying conservation priorities and scheduling conservation actions. This method entails generating a number of alternative plans, calculating the similarity in site composition among all plans, and selecting the plan with the highest density of neighboring plans in similarity space. We compared our method with the classic method that maximizes cost efficiency with synthetic and real data sets. When implementation was uncertain—a common reality—our method provided higher likelihood of achieving conservation targets. We found that χ, a measure of the shortfall in objectives achieved by a conservation plan if the plan could not be implemented entirely, was the main factor determining the relative performance of a flexibility enhanced approach to conservation prioritization. Our findings should help planning authorities prioritize conservation efforts in the face of uncertainty about future condition and availability of sites.     

Elimination of pharmaceutical pollutants by solar photoelectro-Fenton process in a pilot plant

Environmental Science and Pollution Research - In this study, the simultaneous degradation of antibiotics (ampicillin, sulfamethazine, and tetracycline; and non-steroidal anti-inflammatories...     

Au@Ag bimetallic nanoparticles deposited on palygorskite in the presence of TiO2 for enhanced photodegradation activity through synergistic effect

Environmental Science and Pollution Research - Herbicides are hazardous organic pollutants that contribute to the risk of environmental contamination. The aim of this work was to investigate the...