The role of the rural settlements in the Brazilian savanna deforesting process

Although the drivers of deforestation in Brazil are relatively well known, there is still limited understanding of the role of family farm-based rural settlements in land cover changes, particularly in the Brazilian savanna. This research aims to identify land use patterns within rural settlements and examine how they are influenced by regional dynamics. The study is based on GIS techniques and satellite image classification (Landsat 5-TM and RapidEye imagery), combined with geo-referenced fieldwork data in three different regions of the State of Goiás. The results reveal that the deforestation arrangement within the studied rural settlements is very similar to the deforestation found in the surrounding regions. As a positive outcome, the rural settlements have a higher share of remnant vegetation when compared to the surrounding areas, but this is still concentrated within legal reserves. We conclude that the changing patterns of rural settlement land cover are highly influenced by regional dynamics.     

Chlorcarbazole in Böden

Goal and Scope

In soil samples taken from several locations throughout Bavaria, the detection of p,p′-DDT by GC/MS was impeded by a superimposed peak. The authenticity of this compound, which has been identified as dichlorocarbazole by mass spectra databases, is confirmed and some characteristics of its occurrence in soils are described.

Methods

The authenticity of the unknown compound has been checked by comparing the low resolution mass spectra and chromatographic retention times with those of standard compounds. Some methodical studies concerning extraction and clean-up were also carried out.

Results and Conclusion

Mass spectra and retention of the unknown compound are identical with that of the 3,6-dichlorocarbazole standard compound; additionally, a second chlorocarbazole was found with mass spectrum and retention similar to 3-chlorocarbazole. In many topsoils (A-horizons) and subsoils (B-horizons) from 200 locations of different land-uses, the dichlorocarbazole could be detected. In contrast to PAH and other POPs, maximum concentrations occurred in the A- and upper B-horizons of forest soils rather than in the organic layers. Assuming the environmental distribution properties of the chlorocarbazoles to be similar to those of the PAH, this could indicate that the chlorocarbazoles are not deposited from the atmosphere as a result of anthropogenic activities but might be generated by natural processes in situ.

Recommendation and Perspective

To our knowledge, the occurrence of chlorocarbazoles in soils of unpolluted sites has not been previously described. Their widespread occurrence in relatively high concentrations and their detection using analytical standard procedures is surprising and requires further examination.     

Norovirus Foodborne Outbreak Associated With the Consumption of Ice Pop,Southern Brazil, 2020

Food and Environmental Virology - Norovirus is a major cause of foodborne-associated acute gastroenteritis (AGE) outbreaks worldwide. Usually, food products are contaminated either during...     

Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

Estimation of pollutant partition in sandy soils with different water contents

The objectives of this work were: (1) to identify an isotherm model to relate the contaminant contents in the gas phase with those in the solid and non-aqueous liquid phases; (2) to develop a methodology for the estimation of the contaminant distribution in the different phases of the soil; and (3) to evaluate the influence of soil water content on the contaminant distribution in soil. For sandy soils with negligible contents of clay and natural organic matter, contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene (TCE), and perchloroethylene (PCE), it was concluded that: (1) Freundlich’s model showed to be adequate to relate the contaminant contents in the gas phase with those in the solid and non-aqueous liquid phases; (2) the distribution of the contaminants in the different phases present in the soil could be estimated with differences lower than 10% for 83% of the cases; and (3) an increase of the soil water content led to a decrease of the amount of contaminant in the solid and non-aqueous liquid phases, increasing the amount in the other phases.     

Temporal and spatial trend analysis of surface water quality in the Doce River basin,Minas Gerais,Brazil

In Brazil, specifically in the Doce River basin, there is still a great lack of studies on temporal and spatial trends in water quality, since the water quality in the monitoring campaigns is basically evaluated when it comes down to the concentrations of monitored variables. In this sense, the objective of this work was to perform a temporal and spatial trend analysis of water quality data in the Minas Gerais portion of the Doce River basin, Brazil. For this, the Mann–Kendall, seasonal Mann–Kendall and Spearman correlation tests were used in the temporal analysis and the cluster analysis in the spatial analysis. In the analysis of temporal trends, the analyses were performed using the values of the National Sanitation Foundation Water Quality Index (NSFWQI) and the variables that compose it. In the analysis of spatial trends, the stations were evaluated only based on the WQI. With the results of the analysis of temporal trend, it was identified that most stations did not present a statistically significant trend for the WQI. In the stations that presented trends of quality reduction, most of them are in densely populated areas, demonstrating the strong influence of the poor sanitary conditions of the municipalities to the water quality of the basin. When analyzing the variables that compose the WQI, the results found for nitrate demonstrated that water quality deterioration is also affected by the diffuse pollution originating from farming areas. The results for Escherichia coli reinforced the impact of the discharge of domestic effluents and demonstrated the absence of a significative trend is still of concern because it can represent the maintenance of a degradation state in the water bodies. In the spatial trend analysis, the CA grouped the monitoring stations into six clusters based on their similarity among the WQI values, and, together with the results of the other analyses, it was verified that the Caratinga River basin (UGRH5 Caratinga) presented the highest degree of pollution. It was also possible to identify five stations that can be reallocated or deactivated since they have similarities with other stations located in the same watercourse.

     

Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sand

The creation of metal parts via casting uses molds that are generally made from sand and phenolic resin. The waste generated after the casting process is called waste foundry sand (WFS). Depending on the mold composition and the casting process, WFS can contain substances that prevent its direct emission to the environment. In Brazil, this waste is classified according to the Standard ABNT NBR 10004:2004 as a waste Class II (Non-Inert). The recycling of this waste is limited because its characteristics change significantly after use. Although the use (or reuse) of this byproduct in civil construction is a technically feasible alternative, its effects must be evaluated, especially from mechanical and environmental points of view. Thus, the objective of this study is to investigate the effect of the use of WFS in the manufacture of cement artifacts, such as masonry blocks for walls, structural masonry blocks, and paving blocks. Blocks containing different concentrations of WFS (up to 75% by weight) were produced and evaluated using compressive strength tests (35 MPa at 28 days) and toxicity tests on Daphnia magna, Allium cepa (onion root), and Eisenia foetida (earthworm). The results showed that there was not a considerable reduction in the compressive strength, with values of 35 ± 2 MPa at 28 days. The toxicity study with the material obtained from leaching did not significantly interfere with the development of D. magna and E. foetida, but the growth of the A. cepa species was reduced. The study showed that the use of this waste in the production of concrete blocks is feasible from both mechanical and environmental points of view.     

Quantitative–spatial assessment of soil contamination in S. Francisco de Assis due to mining activity of the Panasqueira mine (Portugal)

Through the years, mining and beneficiation processes produces large amounts of As-rich mine wastes laid up in huge tailings and open-air impoundments (Barroca Grande and Rio tailings) that are the main source of pollution in the surrounding area once they are exposed to the weathering conditions leading to the formation of AMD and consequently to the contamination of the surrounding environments, in particularly soils. In order to investigate the environmental contamination impact on S. Francisco de Assis (village located between the two major impoundments and tailings) agricultural soils, a geochemical survey was undertaken to assess toxic metals associations, related levels and their spatial distribution, and to identify the possible contamination sources. According to the calculated contamination factor, As and Zn have a very high contamination factor giving rise to 65.4 % of samples with a moderate to high pollution degree; 34.6 % have been classified as nil to very low pollution degree. The contamination factor spatial distribution put in evidence the fact that As, Cd, Cu, Pb, and Zn soils contents, downstream Barroca Grande tailing, are increased when compared with the local Bk soils. The mechanical dispersion, due to erosion, is the main contamination source. The chemical extraction demonstrates that the trace metals distribution and accumulation in S. Francisco de Assis soils is related to sulfides, but also to amorphous or poorly crystalline iron oxide phases. The partitioning study allowed understanding the local chemical elements mobility and precipitation processes, giving rise to the contamination dispersion model of the study area. The wind and hydrological factors are responsible for the chemical elements transport mechanisms, the water being the main transporter medium and soils as one of the possible retention media.     

Environmental performance evaluation of agro-industrial innovations – Part 2: methodological approach for performing vulnerability analysis of watersheds

Environmental vulnerability analysis has been sparsely used in environmental performance evaluation (EPE) of technological innovations. The present paper proposes a methodological approach to carry out vulnerability analysis of watersheds and to integrate this analysis into methods of environmental performance evaluation of agro-industrial innovations. This approach is applied to the Ambitec-Life Cycle method, described in Part 1 (this issue) of this study. The case study of green coconut substrate compared to ripe coconut substrate, also described in Part 1 (this issue), is now presented considering the vulnerability analysis of the watersheds where the life cycle stages of these products occur. The integration of vulnerability analysis in Ambitec-Life Cycle contributes to a better understanding of the environmental aspects of agro-industrial technological innovations with potential to cause significant impacts in watersheds where these innovations are implemented.     

SMFC as a tool for the removal of hydrocarbons and metals in the marine environment: a concise research update

Environmental Science and Pollution Research - Marine pollution is becoming more and more serious, especially in coastal areas. Because of the sequestration and consequent accumulation of...