An integrated assessment of estrogenic contamination and biological effects in the aquatic environment of The Netherlands

An extensive study was carried out in the Netherlands on the occurrence of a number of estrogenic compounds in surface water, sediment, biota, wastewater, rainwater and on the associated effects in fish. Compounds investigated included natural and synthetic hormones, phthalates, alkylphenol(ethoxylate)s and bisphenol-A. The results showed that almost all selected (xeno-)estrogens were present at low concentrations in the aquatic environment. Locally, they were found at higher levels. Hormones and nonylphenol(ethoxylate)s were present in concentrations that are reportedly high enough to cause estrogenic effects in fish. Field surveys did not disclose significant estrogenic effects in male flounder (Platichthys flesus) in the open sea and in Dutch estuaries. Minor to moderate estrogenic effects were observed in bream (Abramis brama) in major inland surface waters such as lowland rivers and a harbor area. The prevalence of feminizing effects in male fish is largest in small regional surface waters that are strongly influenced by sources of potential hormone-disrupting compounds. High concentrations of plasma vitellogenin and an increased prevalence of ovotestes occurred in wild male bream in a small river receiving a considerable load of effluent from a large sewage treatment plant. After employing in vitro and in vivo bioassays, both in situ and in the laboratory, we conclude that in this case hormones (especially 17 alpha-ethynylestradiol) and possibly also nonylphenol(ethoxylate)s are primarily responsible for these effects.     

Conceptual and numerical model of uranium(VI) reductive immobilization in fractured subsurface sediments

A conceptual model and numerical simulations of bacterial U(VI) reduction in fractured subsurface sediments were developed to assess the potential feasibility of biomineralization at the fracture/matrix interface as a mechanism for immobilization of uranium in structured subsurface media. The model envisions flow of anaerobic groundwater, with or without acetate as an electron donor for stimulation of U(VI) reduction by dissimilatory metal-reducing bacteria (DMRB), within mobile macropores along a one-dimensional flow path. As the groundwater moves along the flow path, U(VI) trapped in the immobile mesopore and micropore domains (the sediment matrix) becomes desorbed and transferred to the mobile macropores (fractures) via a first-order exchange mechanism. By allowing bacterial U(VI) reduction to occur in the mesopore domain (assumed to account for 12% of total sediment pore volume) according to experimentally-determined kinetic parameters and an assumed DMRB abundance of 10(7) cells per cm3 bulk sediment (equivalent to 4 mg of cells per dm3 bulk sediment), the concentration of U(VI) in the macropore domain was reduced ca. 10-fold compared to that predicted in the absence of mesopore DMRB activity after a 6-month simulation period. The results suggest that input of soluble electron donors over a period of years could lead to a major redistribution of uranium in fractured subsurface sediments, converting potentially mobile sorbed U(VI) to an insoluble reduced phase (i.e. uraninite) in the mesopore domain that is expected to be permanently immobile under sustained anaerobic conditions.     

Long-term trends and spatial variability in nitrate leaching from alpine catchment-lake ecosystems in the Tatra Mountains (Slovakia-Poland)

Relationships between catchment characteristics of 31 alpine lakes and observed trends in lake water concentrations of nitrate were evaluated in the Tatra Mountains. Nitrate concentrations increased from background levels <4 microeql(-1) in the 1930s to maxima (up to 55 microeql(-1)) in the 1980s, after which they declined to 4-44 microeql(-1) by the late 1990s. In-lake nitrate concentrations correlated negatively with parameters characterising catchment-weighted mean pools (CWM; kgm(-2)) of soil, i.e. with percent land cover with meadow and soil depth, and positively with grade of terrain, annual precipitation, and the highest elevation in the catchment. The CWM pool of soil and annual precipitation explained together 65% of the current spatial variability in nitrate concentrations. Denitrification and direct N deposition on surface area explained 14% of the variability. Increased atmospheric N deposition and declining net N retention in soils were responsible for long-term changes in nitrate concentrations. Long-term decline in %N retention in soils decreased along with the estimated decline in C:N ratios (from 21 to 18 on average during the last 70 years). An empirical model linking nitrate concentrations in different types of alpine Tatra Mountain lakes to four independent variables (CWM soil pool, annual precipitation, increased N deposition, and average trend in soil C:N ratios) explained 80% of the observed spatial and temporal nitrate variability over the period 1937-2000.     

Biosorption of water-soluble dyes on magnetically modified Saccharomyces cerevisiae subsp. uvarum cells

Brewer's yeast (bottom yeast, Saccharomyces cerevisiae subsp. uvarum) cells were magnetically modified using water based magnetic fluid stabilized with perchloric acid. Magnetically modified yeast cells efficiently adsorbed various water soluble dyes. The dyes adsorption can be described by the Langmuir adsorption model. The maximum adsorption capacity of the magnetic cells differed substantially for individual dyes; the highest value was found for aniline blue (approx. 220 mg per g of dried magnetic adsorbent).     

Co-injection of air and steam for the prevention of the downward migration of DNAPLs during steam enhanced extraction: an experimental evaluation of optimum injection ratio predictions

When steam is injected into soil containing a dense volatile non-aqueous phase liquid contaminant, the DNAPL vaporized within the heated soil region condenses and accumulates ahead of the steam condensation front. If enough DNAPL accumulates, gravitational forces can overcome trapping forces allowing the liquid contaminant to flow downward. By injecting air with steam, a portion of the DNAPL vapor remains suspended in equilibrium with the air, decreasing liquid contaminant accumulation ahead of the steam condensation front, and thus reducing the possibility of downward migration. In a previous work, a theoretical model was developed to predict the optimum injection ratio of air to steam that would eliminate accumulation of DNAPL ahead of the temperature front and thus minimize the potential for downward migration. In this work, the theoretical model is summarized, and an experiment is presented in order to evaluate the optimum injection ratio prediction. In the experiment, a two-dimensional water saturated sand pack is contaminated with a known mass of TCE (DNAPL). The system is then remediated by co-injecting air and steam at the predicted optimum injection ratio, calculated based on the average contaminant soil concentration in the sand pack. Results for the co-injection of air and steam are compared to results for the injection of pure steam or pure air. Injection at the predicted optimum injection ratio for a volumetric average NAPL saturation, reduced accumulation of the contaminant ahead of the condensation front by over 90%, as compared to steam injection alone. This indicates that the optimum injection ratio prediction is a valuable tool for limiting the spreading of DNAPL during steam-enhanced extraction. Injection at the optimum injection ratio resulted in earlier recovery of contaminant than for steam injection alone. Co-injection of steam and air is also shown to result in much higher recovery rates than air injection alone.     

Atmospheric trace metal pollution in the Naples urban area based on results from moss and lichen bags

The results of trace element content analysed in Sphagnum capillifolium and Pseudevernia furfuracea exposed in bags in 1999 are reconsidered to evaluate the reliability of moss and lichen transplants to detect urban trace element atmospheric pollution, using Naples as a case example. After 4 months' exposure, trace element concentrations were at least twice as high as the pre-exposure values and in general higher in Sphagnum than in Pseudevernia. Moss samples were enriched in the following order: As=Cu>Mo>Pb>V>Co>Cr>Zn; lichen samples in the order: Mo>Cu>As=Co=Ni>V>Pb. Based on the calculation of a cumulative load factor, all sites located along the coast had higher trace element loads compared to sites in the hilly inland area. Complementary SEM, TEM and EDS observations showed, despite significant damage to tissue and cell integrity, the recurrent presence of particulate matter in moss and lichen, indicating the considerable presence of dust in the urban atmosphere which, according to chemical composition, may be due both to anthropogenic and natural sources such as volcanic rock and soil and sea salts.     

Patterns of metals and arsenic poisoning in Vibrio fischeri bacteria

The Microtox bioassay was used to establish dose-response curves for some toxic elements in aqueous solutions, namely, Zn(II), Pb(II), Cu(II), Hg(II), Ag(I), Co(II), Cd(II), Cr(VI), As(V) and As(III). Experiments were carried out at either pH 6.0 or pH 7.0 to indicate that pH may influence the measured toxicity of some elements due to pH-related changes of their chemical speciation. EC20 values, which represent a measurable threshold of toxicity, were determined for each element and were found to rank as Pb(II)>Ag(I)>Hg(II) approximately Cu(II)>Zn(II)>As(V)>Cd(II) approximately Co(II)>As(III)>Cr(VI). These values were compared to the limit concentrations allowed in industrial wastewater according to the official regulations in Catalonia (Spain). It appears that the Microtox test is sensitive enough for detecting some of the tested elements with respect to official regulations of Catalonia (Spain) dealing with pollution control, with the exception of cadmium, mercury, arsenate, arsenite and chromate.     

Disease suppression on greenhouse tomatoes using plant waste compost

This study investigated the disease suppression abilities of a compost amendment that was added to the conventional growing medium, yellow cedar sawdust, used in most British Columbia vegetable greenhouses. The compost amendment was produced in a controlled, in-vessel process primarily from greenhouse crop waste materials. The pathogen and cultivar under study were Fusarium oxysporum f. sp. radicis-lycopersici (FORL) on Dombito (FORL-susceptible) beefsteak greenhouse tomatoes. Significant reduction of Fusarium crown and root rot was also realized in tomato seedlings by applying compost amendment from several different batches, as a seed cover or plug substitute. In a greenhouse trial, disease suppression using a mixture of 2:1 sawdust to amendment by volume was shown to be most effective. As a result, the tomato yield over a nine-month growing season was improved by 74% where the medium was deliberately infested with FORL.     

Comparison of spontaneous antibiotic resistance frequency of Salmonella Typhimurium growth in glucose amended continuous culture at slow and fast dilution rates

The objective of the study was to determine the frequency of spontaneous acquisition of resistance to select antibiotics by Salmonella Typhimurium (ST) when grown in glucose amended continuous flow culture at slow (D = 0.025 h(-1)) or fast (D = 0.27 h(-1)) dilution rates. The bacterium was grown in LB minimal medium (pH 6.25) containing no antibiotics. Upon achieving steady state, samples were plated to tryptic soy agar (TSA) alone or supplemented (per ml) with 2 and 16 microg oxytetracycline, 4 and 16 microg tetracycline, 2 and 64 microg kanamycin, and 0.25 and 2 microg enrofloxacin. Regardless of growth rate, CFU of resistant ST from the TSA containing antibiotics was less than 2 x 10(1) except for 2 microg kanamycin and 0.25 microg enrofloxacin treatments (higher than 1 x 10(9) and 4 x 10(7) CFU of resistant ST for trials 1 and 2, respectively). Frequency of recovering resistant ST from the TSA containing the higher antibiotic concentrations was less than 1 in 10(9) for all antibiotics, but was higher on the media containing 2 microg kanamycin and 0.25 microg enrofloxacin at both slow and fast growth rates. In general, minimal susceptibility differences were detected for isolates from slow and fast dilution rates.     

Passive air sampling theory for semivolatile organic compounds

The mathematical modelling underlying passive air sampling theory can be based on mass transfer coefficients or rate constants. Generally, these models have not been inter-related. Starting with basic models, the exchange of chemicals between the gaseous phase and the sampler is developed using mass transfer coefficients and rate constants. Importantly, the inter-relationships between the approaches are demonstrated by relating uptake rate constants and loss rate constants to mass transfer coefficients when either sampler-side or air-side resistance is dominating chemical exchange. The influence of sampler area and sampler volume on chemical exchange is discussed in general terms and as they relate to frequently used parameters such as sampling rates and time to equilibrium. Where air-side or sampler-side resistance dominates, an increase in the surface area of the sampler will increase sampling rates. Sampling rates are not related to the sampler/air partition coefficient (K(SV)) when air-side resistance dominates and increase with K(SV) when sampler-side resistance dominates.